Body Control Module, I already have some videos on my channel here ADPTraining on body modules, but it is a good fit for these Wiring Diagram videos I'm doing now, thanks for the idea, Mandy.
ADPTraining sir, would be pleased if you can kindly specify the title of those videos illustrating the working of BCM or its related. Since, after having been searching for this BCM video, I couldn't locate. Thanks.
My throttle body has three pins for the motor and three pins for the TPS. the DC motor and TPS are not on the same side as in you . they are in separate place on the throttle body. Why does the motor have three pins? What is the third pin?
You probably have 2 pins for ground or one pin is NC not connected. My ELECTROTHROTTLE had a yellow continuity light as soon an you connect to the throttle motor. www.autodiagnosticsandpublishing.com/etc_electrothrottle_electronic_throttle_tester.html
Ok, I can help. Go here...www.autodiagnosticsandpublishing.com/Automotive_Interactive_Wiring_Diagrams.html And go here...www.autodiagnosticsandpublishing.com/ecm_reference_voltage.html
Hi I'm testing the motor connector with a multimeter on a 2006 ford explorer. The negative probe on the battery and with the positive probe I check the two socket contacts. And both of them give me 3.7 volts. I guess thats is wrong right? One socket contact should give 5 volts and the other 0 volts? thanks
Am getting voltage in sensor ground wire at connector but not in ecu pin and there is no continuity in that wire .can u plz let me know that am I checking it in right way and also will control wire has voltage when ignition on