EPOXY or POLYASPARTIC? A Step by step guide for an epoxy & paint chip garage floor.

Подписаться 69 тыс.

Просмотров 318 тыс.

50% 1

Online Concrete Classes: decorativeconc...
This week we are installing a vinyl chip epoxy garage floor. We switched over to using polyaspartic urethane instead of epoxy for the top coats...and I explain why in this video.
New Epoxy Garage Floor Course: dcva.us/ec
Our favorite tools & camera gear dcva.us/favtools
Our podcast, Hacking Concrete: dcva.us/podcast
Follow me on Instagram: / timdcva
Follow me on Twitter: / timdcva
Follow Landon on Instagram: / modernpolishedco. .
Our concrete companies:
decorativeconcr...
modernpolishedc...
Contact me:
Tim Seay
c/o Decorative Concrete of Virginia
14719 Wards Rd.
Lynchburg, VA 24502
...or just DM me on Instagram.
DISCLAIMER: The links in this description & mentioned in this video might be affiliate links. If you buy a service or product with the links that I provide I may receive a small commission (no additional charge to you). Thank you for supporting this channel!
#epoxy #garagefloor #polyaspartic

Опубликовано:

21 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 265

@StreetMachine18 3 года назад

"its really nice to work for nice people!" well said. truer words never before spoken!

@judichristopher4604 Год назад

WOW ... WOW WOW This video is UNREAL Fantastic... WOW (Mind Blown) I have been watching these kinds of videos and YOURS is the First and ONLY one that show each step... I mean EACH Step... like blowing the chips to the wall (I have never seen that done!!!) ... and Vaccuming up the extra Chips... "HELLO".... Good to know... This video ROCKS>.... Thank you for sharing this... WOW!!!!!

@artlayton1425 4 года назад

Had my 2-car garage coated last year using the polyaspartic method. Workers started at 8:15 and were done the same day at 1:30 PM. Waited 24 hours to use. Was expensive, but came with a 15-year guarantee. Definitely the way to go.

@ToOpen6seven 4 года назад

How much was it and how big is your garage if you don't mind me asking?

@BradWeil 3 года назад

Polyaspartics do not have as good as a bond to concrete vs epoxies, a lot of small companies offer a lifetime or 10 - 15 year warranty, not worth the paper they are printed on.

@artlayton1425 3 года назад

@@BradWeil What is the warranty if you use epoxy? How long does it take to finish an epoxy job?

@BradWeil 3 года назад

@@artlayton1425 Every legitimate manufacture of flooring resin systems offer a standard one year warranty. Sika has been in business since 1910. We do offer extended warranties to our applicator network, but keep in mind the installations crew's preparation and application is the key and they are the ones offering the 10+ year warranties.

@BradWeil 3 года назад

@@artlayton1425 Our fast cure epoxy primer/basecoat is ready for topcoat in 2 - 4 hours depending on temperature. Too cold then longer.

@noladowntown 2 года назад

My dad always said if you do something do it right and complete your job. That's why you remain me of him .You do great work.

@TimDCVA 2 года назад

That’s a big compliment. Thank you. 🙏🏻

@cayrick 3 года назад

Best video I have seen in a very long time. No BS and no fluff;straight to the subject matter. Thanks!

@TimDCVA 3 года назад

Thank you! 🙏🏻😀

@IntelligentConcrete 5 лет назад

What an awesome video!!! This is going to be on my “SAVED” list here on out. Great job!

@TimDCVA 5 лет назад

Thanks Jon! 👍🏻👍🏻

@ابومنتظرالأسديالحكو 4 года назад

Very good job God blessing you three steps first primer epoxy then colour epoxy last light

@derekaldrich2853 4 года назад

You should look into being a dealer for Penntek. They have a less than 1 day dry polyurea product thats got a lifetime guarantee with 15 year warranty. Much more flexible and durable than regular epoxy! You can't buy it in stores and its not cut with any thinners. 100% polyurea. You can also install in very hot or very cold Temps down to -20°. Highly recommend!!

@TimDCVA 4 года назад

Cool. I’ll look into it. I haven’t really had much interest in the 1 day systems... always worried that a floor will get away from us before we can get it rolled out. The low temp install would be awesome though. 👍🏻

@christopherj.l.watson3560 3 года назад

Thank you for the kind reply

@noladowntown 2 года назад

I really luv your channel great work. You remind me of my dad. My dad has his own business building house.

@TimDCVA 2 года назад

That’s really cool. Thank you.

@wolfsden3812 4 года назад

Omg that looks amazing.....getting mine done mid August.......fingers crossed it looks like this

@TimDCVA 4 года назад

Thanks! Good luck with your project. 👍🏻

@jerrywilder9403 3 года назад

Great job guys I’ve never heard of this type of finish but it sounds good polyspartic maybe my choice

@TimDCVA 2 года назад

Thanks!

@athomeandtravel995 Год назад

Great video. Approximately how many pounds of chips would you throw down on a 500 sqft garage floor? Thank you.

@TimDCVA Год назад

Thanks! We would probably order 120lbs for that job.

@nickolepetersen1061 Год назад

Do you know of installers you would personally recommend in the Bradenton, FL area? Watching your videos to learn how to hire the right installer.

@mauriciogonzalez6302 4 года назад

Geeze, these floors are something else. Great work. Question: if you caulked the saw cuts why do they still show up in the final result?

@TimDCVA 4 года назад

Thanks! This customer chose not to cut the saw joints. The only thing we caulked on this floor was a few hairline cracks.

@miked6097 3 года назад

Looks great. Epoxy isn’t uv stable that’s why it yellows. Poly for all out doors or top coats where sunlight can hit

@TimDCVA 3 года назад

Thanks!

@Henderson771 4 года назад

Looks good, how come you didn't fill the control joints to make it a seamless system? You would also get better coverage on your coating and sealer if you used a larger squeegee and laid a bead on liquid on the floor and spread it out by following it with the squeegee.

@TimDCVA 4 года назад

Thanks! We offer filling joints as an option to all customers. They chose not to do it. I like it better with the lines showing anyways. I don’t like to use a wide squeegee. It leaves too much material in the low spots of the floor.

@jonsouth2592 3 года назад

Absolutely terrific videos man.

@TimDCVA 3 года назад

Thank you! Really appreciate the encouragement. 👍🏻

@ranjuljoshi8353 3 года назад

Thank you for such an informative video. I am working on getting my garage floors done and wanted to know if a poly/epoxy combination would be a better approach than poly alone?

@TimDCVA 3 года назад

I prefer epoxy primer with a polyaspartic top coat. I don’t personally like a clear epoxy top coat with poly...but it is pretty common.

@ranjuljoshi8353 3 года назад

@@TimDCVA Thanks for the clarification. Easy to make a decision now.

@TimDCVA 3 года назад

Happy to help. 😀

@vickiewilliams8506 3 года назад

You did a great job! I noticed that you did not extend the Apoxsee floor beyond the garage door. Smart move. Our installers took it all the way to the asphalt driveway, so they cover the entire concrete garage floor. Now the Apoxsee that extended beyond the garage door is chipping up. How do I stop it from going any further? How do I clean up the remaining Apoxsee that is on the garage floor beyond the garage door to create a nice line? I have tried to get people to come out to fix it. But they have said that the job is not big enough and unless I want to replace the entire garage for it’s not worth they’re doing it. So how can I remove what’s chipping and how do I prevent it from going any further? But I would appreciate any ideas because this is a problem that I believe could be fixed.

@calistiae 4 года назад

that was relaxing to watch! thanks for posting this.

@TimDCVA 4 года назад

I’m glad you enjoyed it. Thank you for watching. 😊

@carlomorocutti7410 2 года назад

Great job. The same type of work can be carried out in a large (1000 square meters) workshop and garage? I am thinking to the reduced hardening times and to the hot tire pick up issue

@TimDCVA 2 года назад

Yes I think it would work well for your garage.

@raydtv1458 4 года назад

Non Yellowing Tips were great thanks!!!

@93V 10 месяцев назад

What are the limitations on doing vertical areas? Is the issue typically getting the chips to stay in place or is it more about the top coat fighting gravity?

@jcaridi11 2 года назад

Thank you for this very informative video. I am having trouble clicking on the link for the polyaspartic product you use. Any assistance appreciated. I am going to attempt project myself. Assume grind, vaccum, prime, epoxy, flake and then polyaspartic. Thank you.

@TimDCVA 2 года назад

The course site is down this evening for maintenance. Just check back tomorrow and it should be up. Thanks! decorativeconcreteschool.teachable.com

@GRANDMASTER3D 2 года назад

How about epoxy over brick? I know it sounds weird, it's a weird house. The interior floor is brick over concrete so the brick it pretty stable. I should remove the brick and float concrete over the whole thing but the client is reluctant.

@TimDCVA 2 года назад

I always tell the customer we need to remove whatever is on the concrete. I would just be nervous the surface of the brick would deteriorate.

@erindav1 3 года назад

I have a room under my garage that the salt and water have rotted the galvanized pans underneath. I have 2 drains in my garage but the salt soaked right in. Will this epoxy application stand up to self and water? Great video btw! I've subscibed.

@msp9810 4 года назад

Question i was thinking of doing a white countertop with minimal vein with countertop epoxy and using polyaspartic as top coat. Will polyaspartic be as glossy as epoxy and will it have the orange peel look?

@TimDCVA 4 года назад

I’m not really sure. Epoxy probably levels out more since it doesn’t set up as fast. I’ve never noticed any of our polyaspartic floor coatings having an orange peel look though. You should check out the Legarri channel. They do a lot of really good epoxy countertop tutorials.

@msp9810 4 года назад

@@TimDCVA thank you for responding

@chet3louisiana558 2 года назад

Great video. Where do I go to buy all of the coatings and chips? Thinking of adding this to my existing business and want to use t on part my a newly built house.

@TimDCVA 2 года назад

Thanks! I have a course that teaches everything we do, including which materials we like. decorativeconcreteschool.teachable.com

@Imwright720 2 года назад

What about the slip factor. I didn’t see you add any silica to the final polyaspartic. Is this top coat non slip. ❓❓❓

@TimDCVA 2 года назад

We don’t ever get any complaints about it being slippery. I think it’s a good balance of texture so it isn’t too slippery without it being so rough that it would be hard to clean.

@sammytheface8821 2 года назад

If I painted a mural on a clean slab concrete floor, and you guys' clear coat on top, would that work? Would it be ok, if mural was done in water base acrylic paints?

@TimDCVA 2 года назад

It would probably be fine if you sealed it with water based sealer. You would need to test it first.

@dandugan824 4 года назад

Tim- This is beautiful work! Two questions though...I live in Pittsburgh, PA, with cold winters and snow. Lots of hills here and road crews use a great amount of salt and calcium chloride on the roads to keep them from icing over. So first question: Will this product stand up to road salt and calcium chloride? Second question: is there any risk of hot tire pickup? Thanks-

@TimDCVA 4 года назад

Thanks! We haven’t had any issues with them holding up to road chemicals here in VA. Hot tire pickup is not a problem for high solids epoxy & polyaspartic urethane (assume it is prepped correctly). Some lower solids/thin-film coatings from local paint stores don’t do as well under tires though.

@dandugan824 4 года назад

@@TimDCVA Thanks Tim! I gotta do something before winter...gonna give it a go!

@BradWeil 3 года назад

I have a contractor that has been doing this for years in Pittsburgh, PittsburgGarage.com

@paulandchrissyjaselskis67 4 года назад

Tim, awesome video. Awesome work. Does the polyaspartic ever bubble? If it does should bubbles always be fixed? Thanks

@TimDCVA 4 года назад

Thanks! Changes in environmental conditions during an installation can cause lots of different issues. It’s hard to answer your question without seeing what you are talking about.

@paulandchrissyjaselskis67 4 года назад

We had a floor put in at our condo last week. There are bubbles everywhere. The installer say it's normal, from the gas release. In general, do you believe bubbles always need to be fixed or it depends on reason such as if from gas release or too thick of a coat. Thanks Tim.

@harleyhoracio1 4 года назад

I got quoted $70 a sq’ for my 3 car garage. That’s enough to make me go it on my own. I’m just fearful of the working time of the product and not being able to get it perfect before it starts to setup. I’ve thought about working in sections up to the expansion joints. What do you think? I have plenty of experience working with PPG direct to metal, part A and B epoxy, so I pretty much know what I’m up against. Nice video and great work, hat tip to you guys!

@TimDCVA 4 года назад

Thank you! That is expensive. I don’t blame you for doing it on your own. If you’re familiar with epoxy then I think you’ll be okay doing it in sections. 👍🏻

@EB2- 4 года назад

$70 a square foot is outrageous lol

@BradWeil 3 года назад

Market price for an installed resin/flake system for a residential garage is $5 - 7 per square foot depending on size and location.

@nabilmoaad8906 3 года назад

How is the inclination of the floor measured and the method of dropping the running water in which this floor is cleaned ?!

@TimDCVA 3 года назад

I’m sorry... I don’t understand what you mean.

@msbzr1228 3 года назад

I have a sunroom with awful tile. Can this process be used over existing tile (without removing it)? We are trying to find a floor that is dog proof (they haven’t taken well to housebreaking!) but it needs to be flooring the will go over a floor that slopes (there is about a 6 in drop from one end of the room to the other -about 30 feet). Is epoxy flooring as durable as it looks?

@TimDCVA 3 года назад

We always suggest taking up tile before applying epoxy. We can go over tile if there is some reason not to take it up. We’ve actually done epoxy flooring for dog kennels... so yes I think it would probably be okay.

@riririri8535 3 года назад

We did the same to our outdoor staircase and balcony and after 3 years on the balcony there is a strip of 4 ft long that has lifted and there is like a bubble underneath but has not cracked yet, why is that and what might of caused it?

@TimDCVA 3 года назад

It could be a number of things. Sometimes it will happen if the concrete wasn’t prepped enough before applying the coating… or it could have been caused by moisture passing through the concrete. It’s hard to say for sure without seeing it.

@riririri8535 3 года назад

Tks

@HaNgo-en1wc Год назад

So cool I’m gonna try this 🎉

@christopherj.l.watson3560 3 года назад

What is the purpose for the vinyl chips and can one do the same but without the vinyl chips?

@TimDCVA 3 года назад

It’s just for the look. It also leaves a good texture for a garage floor. Epoxy without chips can be slippery when wet if you don’t add something to give it texture. But to answer your question… yes you can do it without chips.

@Mrgoodguy865 3 года назад

hey great job i install also in the Caribbean. What brand polyapartic do u use? if u mind telling me

@TimDCVA 3 года назад

Thanks! We use 85% solids polyaspartic. We talk about brands that we use in our course. Decorativeconcreteschool.teachable.com

@bohiragoto 2 года назад

Hi, Can you please suggest the product - Polyaspartic Coating; where to buy and and what to look for while purchasing. I am planning to do Garage Floor Epoxy using Polyaspartic (clear top) Coating, but finding it very difficult to purchase the item. Polyaspartic is neither available in Home Depot nor in Lowe's. Thanks in advance

@TimDCVA 2 года назад

Hi. We use 100% solids epoxy with 90% solids polyaspartic urethane. You usually have to buy directly from the manufacturer. We don’t offer specific brand suggestions on RU-vid. That is available In our course along with a lot more information about how to do this type of coating. decorativeconcreteschool.teachable.com

@kameshmishra1979 4 года назад

Can this be done on a outdoor concrete counter top? It does get part sunlight in some areas. The counter top is concrete and not smooth. Do you think epoxy will be a good idea? The counter top is about 80 sq Ft. What will be the cost for labor & material?

@edwardtemporado9806 2 года назад

Nice work

@TimDCVA 2 года назад

Thanks!

@JDonthefly 2 года назад

@timdcva do you ever need to do anything special with the control joints on the slab before your epoxy base layer ?

@TimDCVA 2 года назад

We fill them with epoxy paste or polyurea caulk if the customer wants a seamless floor. Other wise, we don’t have to do anything to them.

@tomhiers9025 2 года назад

I would like to do the apolly acrylic in my house do I have to do the whole thing at one time for it to be uniform or could I do half let it dry and set up and then do the other half would that look okay thank you

@TimDCVA 2 года назад

The color should be uniform if you did half at a time… but the top coat might have a slightly different sheen if you did it in two phases.

@tomhiers9025 2 года назад

@@TimDCVA thank you very much I really appreciate it when I do it I will do the whole floor

@TimDCVA 2 года назад

Sounds good. Let me know how it goes.

@sainathdharane7395 4 года назад

Life of this epoxy

@TimDCVA 4 года назад

We hardly ever get warranty calls for these floors. I would say they probably last > 10 years... but I guess it really depends on how you use them.

@fireal1000 4 года назад

Most polyaspartics don't seem to have that much working time. Any time i've used them you have about a total of maybe 10 minutes to squegee it out and back roll it before it gets too tacky and starts leaving roller marks. Whats the working time with your polyaspartic? I know if i rolled any of the polyaspartics i've used as much as you do in the video, i'd have roller marks galore.

@TimDCVA 4 года назад

I used to hate polyaspartics for that reason... but over the last few years different manufacturers have come out with slow setting polyaspartics. This one gives you about 30 minutes of working time during the summer months.

@creatorroller9090 2 года назад

@@TimDCVA where did u buy this product I mean polyespartic, thanks

@TimDCVA 2 года назад

We cover which specific products we like to use in our course. decorativeconcreteschool.teachable.com

@fly4fun24 4 года назад

Hello tim, nice video, i loved the fact we can cut one step, your technic is impressive. I am in florida, so i can't hire you, i know you use your own stuff, i really appreciate if you could give me a list of comparable product to buy. Thanks.

@TimDCVA 4 года назад

Thanks! Send me an email and I’ll try to help you out. My email is in the video description. 👍🏻

@fly4fun24 4 года назад

Here it is chucopilot@gmail.com thanks

@ToOpen6seven 4 года назад

Can you recommend someone in the Wake County area in NC (near Raleigh/Wake Forest) who can do this type of work?

@TimDCVA 4 года назад

We work in your area sometimes. My email is in the profile of this video if you want to talk about the project. Thanks!

@waywardcaster 2 года назад

Does the polyaspartic some what grippy by itself?

@TimDCVA 2 года назад

Not really. The chips give it texture to keep it from being slippery.

@nickybrwn Год назад

Do you try to limit the amount of epoxy and top that you trowel into the control joints?

@christopherj.l.watson3560 2 года назад

Awesome

@TimDCVA 2 года назад

Thanks!

@larrylentz2592 4 года назад

I have a old stained and damaged concrete floor 26 × 40. There is bad stains that muriatic acid cant remove. What floor covering and procedure can I do that will stay down.?

@TimDCVA 4 года назад

We usually grind the concrete before coating any project. That removes 99% of stains on the concrete. Occasionally there will be oil spots that the grinder can’t remove... in that scenario we use an oil stopping primer on that spot. Google “General Polymers 3504”.

@larrylentz2592 4 года назад

Thank you

@fatihcetinn 3 года назад

Why you dont use Polyurethane transpare t top coat for place of polyaspartic? Is there any reason for that?

@chrislambe400 4 года назад

Nice video, you might be confusing recycling and reusing though. @2:44 the chips confused the hell out of the youtube compression algorithm and produced nasty compression artefacts.

@TimDCVA 4 года назад

Thanks...I think? I’m not confused though. ✌🏻

@markappleyard3881 4 года назад

Hey bud . I’m goin to attempt this . Primer first ? Then epoxy ?

@TimDCVA 4 года назад

👍🏻👍🏻

@Georrodshareef 2 года назад

Where do you order your material from ? Your epoxy’s and chips and stuff

@TimDCVA 2 года назад

A couple different places. I cover what I’m currently using in our course. decorativeconcreteschool.teachable.com

@debbiedaniels4747 2 года назад

Can you do inside on slab floor?

@TimDCVA 2 года назад

Yes.

@my3jeeps 3 года назад

Why not full the expansion joint?

@TimDCVA 3 года назад

We give customers the choice. I personally think it looks better with lines in it.

@mainewills4643 3 года назад

Great videos!

@TimDCVA 3 года назад

Thank you!

@londys 4 года назад

will the floor works for skateboarding? (Durability, slid ability etc)

@TimDCVA 4 года назад

No I don’t think so. It would probably be too slick.

@mauriciogonzalez6302 4 года назад

Hey Tim, do you fill the joints with anything or is it okay just to let the solid color epoxy fall into the joint cuts?

@TimDCVA 4 года назад

We leave them open on most jobs. Occasionally a homeowner will want them filled... we use Euclid quick joint in that scenario. Overfill the lines and shave them flush to the floor after it cures.

@PSNninjasaurusrex 4 года назад

Hi, the base coat looks less viscous than other epoxy videos I've seen. Is it because it's a primer? Will that affect quality at all?

@TimDCVA 4 года назад

We use a 93% solids primer...which is considered a high solids primer. It’s pretty close to the same as most other primers. It does have a lower viscosity than most though. It doesn’t effect the quality.

@CHIRAGPATEL-dz5np 3 года назад

Kool job. What do you call the special shoes you are wearing? & where do I get it? Thanks

@KneeBenderservant 3 года назад

Spiked shoes on eBay or amazon

@peterkemlingpkbikeperforma9397 Год назад

What size Napp roller is that? Thanks 🙏

@juanjimenezpavingcoatings8117 4 года назад

Hey I want to get into the epoxy bussines I have a question how would I or where can I get the epoxy from like a catalog to show clients different colors

@TimDCVA 4 года назад

Most manufacturers give those away for free. I would suggest going to a manufacturer training...you can learn and get promo materials.

@bubthegreat1 3 года назад

What's the difference between epoxy and polyaspartic? I'm looking to do our garage and don't know what to buy

@TimDCVA 3 года назад

Polyaspartic is a urethane that sets faster than epoxy and doesn’t turn amber in sunlight. It doesn’t bond to concrete as well as epoxy… so we use epoxy primer… broadcast chips and then top coat with polyaspartic.

@bubthegreat1 3 года назад

@@TimDCVA ahh that makes sense. The kits that I am looking at online, I'm guessing they are likely 100% solids epoxy and then the top coat is the polyaspartic top coat. Is that what I should be looking for?

@TimDCVA 3 года назад

I would look for >95% solids epoxy with 85% or greater solids polyaspartic. The poly sets really fast. If this is DIY then be careful. Don’t mix too much at once and have plenty of helpers available.

@outcast566 4 года назад

Man that looks great!

@TimDCVA 4 года назад

Thanks!

@tamyralynn1113 3 года назад

typical price/sq-ft...?...I have about 500 sq ft garage...

@TimDCVA 3 года назад

Between $5-$7 per square foot. Price varies depending on location and the condition of your concrete.

@jeffg2742 4 года назад

Just a question how much does it cost to do a garage that size

@TimDCVA 4 года назад

They usually cost around $5 per square foot.

@johnnyk617 2 года назад

What's this cost per sqft? Normally?

@TimDCVA 2 года назад

Usually around $6 per foot

@MichaelMichael-xi3jl 4 года назад

that was wonderfull job,i live in Georgia Atlanta and I was wondering if you could please tell me where I can buy the products from since I live too far?? thank you so much

@TimDCVA 4 года назад

Thank you! We used our own brand of products for this project. Send me an email or DM on Instagram and I can give you some suggestions of similar brands that you can probably buy.

@johnbevington6590 4 года назад

TimDCVA cashiers, NC?????

@melaniedionne9837 3 года назад

@@TimDCVA i was looking at also doing my garage but i live in Canada. Would you have name products that would be good and you'd recommend for a dog kennel?

@albertsagaoinit5382 3 года назад

@@TimDCVA Nice video bro, very professional looking. Watched tons of videos on RU-vid on similar project but yours looks way better. BTW, I plan to do mine, can you email me (asagaoinit@gmail.com) similar products I can buy here in Cali locally (home depot/Lowe's) for your Primer & Finishing/Top coat? Thanks in advance!

@madams5190 3 года назад

Where do we get those special nail bottom shoes?

@TimDCVA 3 года назад

amzn.to/3yRbniY

@lalosanchez4255 2 года назад

Brands and were to buy the material thank you

@TimDCVA 2 года назад

I cover that in my course: decorativeconcreteschool.teachable.com

@edy042 Год назад

How much does a 3 car garage this size cost?

@jonathantolbert4176 2 года назад

Does it still have a texture after applying poly?

@TimDCVA 2 года назад

Yes it does.

@adventurebabyboomer7318 3 года назад

I would like my office and entryway done. Where are you located?

@TimDCVA 3 года назад

Lynchburg, VA.

@randyreynolds986 3 года назад

What type of poly do you use as a top coat over the epoxy, and where do you get it at?

@TimDCVA 3 года назад

We use a few different brands of 85-90% solids polyaspartic. I cover that in my epoxy course. decorativeconcreteschool.teachable.com

@randyreynolds986 3 года назад

@@TimDCVA Didn't realize a answer was going to cost me $297.00

@nationhotrods 2 года назад

Yeah no joke….

@wodzu2203 3 года назад

How lond did it take to make the polyaspartic resin lqyer before it cured? Is it still useful to work with (is it still thin) after e.g. 30 minutes?

@TimDCVA 3 года назад

30-45 minutes of working time. Cures overnight.

@davidj.gallardo4553 4 года назад

Is the final product slip proof if it gets wet?

@TimDCVA 4 года назад

That’s a tough question to answer because “slippery” is subjective. Our customers usually like the texture of the floors. I think they are a good balance between being easy to clean without being too slippery.

@TellySofiaSupit15380 3 года назад

welldone ❤️ love it...

@TimDCVA 3 года назад

Thank you!

@jimmyqs1558 2 года назад

How much you guys charge per sq foot?

@TimDCVA 2 года назад

It’s different for every project. (Bigger jobs are less psf than small jobs) Fill out this form if you want a virtual quote: www.decorativeconcreteofvirginia.com/contact-us

@shinranews 4 года назад

is this a viable technique for a basement floor too?

@TimDCVA 4 года назад

Yes it is. We do it all the time. 👍🏻

@dougkooistra6265 5 лет назад

Do you have a dedicated angle grinder for the edging or can you get right up tot he walls with the grinder you show in the video, Tim? Thanks!

@TimDCVA 5 лет назад

It gets close enough in some areas... but we do have a hand grinder for tighter spots. You can see the grinder + dust shroud + hepa vac that we use here: www.amazon.com/shop/timdcva?listId=12B07NXHDBW92

@jbright97 3 года назад

What is brand of material

@TimDCVA 3 года назад

We only share that info in our online course. The link is in the description of the video.

@garyzimmerman8679 Год назад

I would do the poly, but they don’t the cool color options that epoxy have, like the marble look, or a water look, or the the metallic look of copper, or silver etc…. The color choices for poly suck.