Error 18005 Easy Fix For TP-Link Routers WR940N and Others DD-WRT Firmware Install

Подписаться 177 тыс.

Просмотров 35 тыс.

50% 1

I pinned command in the comment section below to make sure it's always available. Hat Tio and Great Thanks to Thành Nguyễn Xuân for showing me this.
RU-vid does not allow the posting of "Less Than" or "Greater Than" symbols in the video description so I could not post the script. Here is a link to a page with the exact script about midway on the page: goo.gl/f4j617
Copy everything in each line separately in sequence place each line in the Wireless SSDI field and save after each input. Router will reboot on the last line. Then upgrade to DD-WRT should be possible.
Wait 15 seconds after the last command and go back to the router homepage (192.168.0.1)
TP-Link WR940N Router (Upgraded) At Amazon: amzn.to/2NodxPu Ebay: goo.gl/DJEqCT
TP-Link N750 Wireless Wi-Fi Dual Band Router (TL-WDR4300) At Amazon: amzn.to/2Vrcxyx Or Ebay: goo.gl/8vm9U9
TP-Link AC900 WiFi Router At Amzon: amzn.to/2pm0Ie3 Ebay: goo.gl/f65q15
TP-Link N300 Router (TL-WR841N) At Amazon: amzn.to/2gdL8h8 At Ebay: goo.gl/wTW2tg
TP-LINK TL-WR841ND Wireless N300 Home Router Detachable Antennas: amzn.to/1GUSvRS Or Here At Ebay: goo.gl/FwoCRW
Cable Matters 160021 5-Feet Cat6 Snagless Ethernet Patch Cable, Pack of 5 (Black/ Blue/ White/ Red/ Green) At Amazon: amzn.to/2gdUg5k At Ebay: goo.gl/XAGhmJ
Various Storage Devices:
Seagate Portable 1TB External Hard Drive At Amazon: amzn.to/2SzXCQw Or Ebay: goo.gl/JeqiF4
Seagate Portable 2TB External Hard Drive At Amazon: amzn.to/2Asn3fT Or Ebay: goo.gl/FQ9QX1
SanDisk Cruzer 16GB USB Flash Drive At Amazon: amzn.to/2Vp4qm8 Or Ebay: goo.gl/AH9dAe
Sandisk Cruzer 32GB USB Flash Drive At Amazon: amzn.to/2CKIwCd Or Ebay: goo.gl/1hxZnX
Sandisk Cruzer 64GB USB Flash Drive At Amazon: amzn.to/2RsaSJD Or Ebay: goo.gl/m9T8mv
Sandisk Glide 128GB USB Flash Drive At Amazon: amzn.to/2s67V3d Or Ebay: goo.gl/wAatgZ
Sandisk Ultra Fit 256GB USB Flash Drive At Amazon: amzn.to/2s5x3Hn Or Ebay: goo.gl/fqUNpM
Toshiba Canvio 1.0 TB USB 3.0 Portable Hard Drive At Amazon amzn.to/2SEh0fd Or Ebay: goo.gl/vUzGcT
STANLEY 94-248 65 Piece Homeowner's DIY Tool Kit At Amazon: amzn.to/2SR7ZzS Or eBay: goo.gl/FYvMuy
Amazon Prime Membership Sign Up: goo.gl/ewmAV
●▬▬▬▬▬๑۩۩๑▬▬▬▬▬▬●
Facing Cam: amzn.to/2P9bazV Or eBay: goo.gl/7WkzYb
Overhead Cam: amzn.to/2E4kiF8 Or eBay: goo.gl/kqeoVv
Handheld cam: amzn.to/2Qmh2e5 Or eBay: goo.gl/KAiZyX
Video Software: amzn.to/2SjNKdf Or eBay: goo.gl/CdWBwG
Desktop Capture: amzn.to/2SgVaxQ Or eBay: goo.gl/LYNC3f
Mic: amzn.to/2KFj43r Or eBay: goo.gl/yC8uMC
Mic Wind Filter: amzn.to/2ScZdes Or eBay: goo.gl/HruSsJ
Lens: amzn.to/2Sj4S2G Or eBay goo.gl/C1z9vE
Lens Filter: amzn.to/2P2zN1n Or eBay: goo.gl/U3psNL
Wind filter for handheld cam: amzn.to/2P7TYuA Or eBay: goo.gl/wwRtEk
Selfiestick dslr: amzn.to/2TUR4gn Or eBay: goo.gl/Rtzrrd
Tool box: amzn.to/2E3r8dQ Or eBay: goo.gl/houqn4
Laptop stand: amzn.to/2E24dzH Or eBay: goo.gl/ZfXhT3
Studio mic: amzn.to/2Q2FO3w Or eBay: goo.gl/bHnT8Z
Tripod Neewer Professional 61 inches: amzn.to/2VnotkL Or eBay: goo.gl/GfNGGT
Neewer Lightweight Portable 66"/168cm Carbon Fiber Camera Tripod Monopod At Amazon: amzn.to/1rsQN5l Or eBay: goo.gl/AxonTQ
Tripod Neewer Alluminum Alloy 62": amzn.to/2LIbEwW Or eBay: goo.gl/ao5nss
●▬▬▬▬▬๑۩۩๑▬▬▬▬▬▬●
02/07/19
Error 18005 Easy Fix For TP-Link Routers WR940N and Others DD-WRT Firmware Install

Опубликовано:

28 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 90

@richardlloydusa 5 лет назад

Copy each line separately in sequence place each line in the Wireless SSDI field and save after each input. Router will reboot on the last line. Then upgrade to DD-WRT should be possible. `echo "httpd -k"> /tmp/s` `echo "sleep 10">> /tmp/s` `echo "httpd -r&">> /tmp/s` `echo "sleep 10">> /tmp/s` `echo "httpd -k">> /tmp/s` `echo "sleep 10">> /tmp/s` `echo "httpd -f">> /tmp/s` `sh /tmp/s` Wait 15 seconds after the last command and go back to the router homepage (192.168.0.1)👍😀

@zoltanpeter5276 4 года назад

Thank you very much for making and sharing this video. You saved a lot of time for me, i was about to do the upgrade with seriel/tftp method. This is a lot easier and quicker! My router is TP-Link WR841N v11, just for the record, running OpenWrt now. :)

@richardlloydusa 2 года назад

You're most welcome. I'm glad and happy to know I could help you. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀

@heatnet97 2 года назад

OMG! It is actually working. Firstly I wasn't believe, but tried and it was successful. Nice hack! Thank you!

@richardlloydusa 2 года назад

You're most welcome. I had the same reaction when I first saw it too but like you I tried it and it WORKED! I was equally amazed and I have used it several times since I discovered it. Glad to hear about your positive results. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. Thank you for watching, commenting, subscribing and the very kind words. I appreciate it greatly. All the best.👍😀

@mrjmn3838 5 лет назад

Thank you very much! I have succeeded with TP Link MR3420...!This tutorial ist great :-)

@KCB0023 5 лет назад

muchas gracias !!! me salvaste la vida !!! muy buen video y muy bien explicado !!! muchas gracias desde valencia (españa) funciona 100% TP-Link WR940N V3 (US)

@richardlloydusa 5 лет назад

You are most welcome. I am glad to know I could help you. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀

@ザカリア-l8d 5 лет назад

This video saved me a lot of time. Thank you very much Richard.

@hungn.b846 4 года назад

Many thanks, It worked with 1043nd v3

@BadmintonSkills 5 лет назад

tried but this method doesn't work on WR841N v11

@MiniLuv-1984 5 лет назад

Thanks for the guide. It'd be great if you could give us a rundown/showtime of the advantages of going to the WRT firmware instead of the factory default firmware too - maybe part 2?

@richardlloydusa 5 лет назад

You are most welcome. I will look into doing a video on the advantages of DD-WRT over the stock firmware. My main purpose here was to show how to get past the 18005 Error on these routers in a unique new way and then prove that the fix worked by quickly installing the DD-WRT firmware. I will consider it for sure. Thank you so much for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀

@paganaki1986 2 года назад

It works for wa701nd !!! Thank you!!!!

@richardlloydusa 2 года назад

You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀

@felixlinares7181 Год назад

Thanks man you saved me.

@richardlloydusa Год назад

You're most welcome. Glad to hear about your positive results. Comments like this make my DAY! 😁️ I'm glad to know I could help you and that you got value from my work here. Thank you for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀

@fuckedup3520 5 лет назад

sir i am being your fan watching this video... its really very interesting and helpful to us... thank you so much sir ... sir english is my second language .. if you add subtitles its will more helpful to us who is not good at english ... the same problem happened to me ... still not fixing mine :( sir help me if possible

@richardlloydusa 5 лет назад

If you click on the CC button you can look at the closed captioning and select your language. RU-vid does this for most videos. You are most welcome. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀

@PhysXe30 4 года назад

Many thanks for the tutorial! Worked very nice good with TP-Link WR940N V6.1, I installed OpenWRT instead!

@richardlloydusa 4 года назад

You are most welcome. I am glad to know I could help you. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀

@eldersister2323 4 года назад

Спасибо огромное, выручил. Очень тебе благодарен.

@vitaliyshulha 2 года назад

Thank you! It was very helpful 🙏

@richardlloydusa 2 года назад

You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀

@miguelmelendezcordero4076 9 месяцев назад

My problem started since I updated the firmware to v6 EU when only v3 is available in my region. I have a router model TR-WR940N, haware version v6. What I want is to go back to the version of my region, v3, but I get that error. and try your steps but when you enter the last code nothing happens

@jerryedge311 4 года назад

Thank you Richard Unfortunately, I did not succeed in getting my TP-Link Archer C7 AC1750 to work. I suspect the fact it is dual-band interfered with this solution.

@BorisMita 2 года назад

Thanks a lot for the video!!!

@richardlloydusa 2 года назад

You're most welcome. I'm glad and very happy to know that I could help you. Thank you so much for watching, commenting and the very kind words. I appreciate it greatly. All the best.👍😀

@WagnerSilvaHeadbrother Год назад

Insane, I did !

@richardlloydusa Год назад

@mido.iq8 4 года назад

Please I need help I applied the method and it succeeded with me, but I cannot refer to the original system, please There is no way to return to the original system

@kafeerosimon5752 5 лет назад

hello richard thanks for this video its really helpful, and iv used your videos for my networks and they have really helped ,i was wondering can i upgrade lower TP-link routers, and other routers like huawei?

@richardlloydusa 5 лет назад

You are most welcome. If the routers are compatible with the DD-WRT firmware than yes you can. Check the availability and compatibility for the firmware at the DD-WRT website. If you see available firmware for your model and version of router more than likely it will work. Thank you so much for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀

@anggunpaket4650 4 года назад

Thanks From Indonesian

@MadeKenzo 2 года назад

I cannot solve error 18005, 940n V6 RU (3.18.1 Build 171115 Rel.46734n) If I download dd wrt EU, should it work in the RU region ?

@richardlloydusa 2 года назад

I have no way of verifying if that would work as I do not have the RU version or a V6. Did you follow the video exactly and use the copy and paste method from my pinned comment? Thank you so much for commenting. I appreciate it greatly. All the best.👍😀

@avi95233 2 года назад

Is it also suitable for the Archer VR600v V2 model?

@richardlloydusa 2 года назад

I can't verify it for sure but there is no harm in trying. You can always do a hard reset on your router if it does not work and bring it back to the factory defaults. Give it a shot and see. Please report back if it works so I can inform other people. Thank you so much for commenting and watching. I appreciate it greatly. All the best.👍😀

@sanketbalapurkar 4 года назад

Hii Richard, Can you help to Fix Error 18000 for TP Link WR740N, Chinese Firmware, I want to change it to English.

@theoldman6 5 лет назад

I have a linksys wrt1200ac with OpenWrt and i would like to put DD-WRT on and Can't if you know how i would really like to know i like DD-WRT better than OpenWrt

@richardlloydusa 5 лет назад

Unfortunately I do not have a wrt1200AC to experiment with as you know there is always a risk of bricking the unit if it is not done right so I am very hesitant to suggest anything I have not personally tried with a router in my physical possession. Thank you for watching and commenting. I appreciate it greatly. All the best.👍😀

@qaiserkhan1403 4 года назад

wahoo....Amazing sir

@amirymk88 4 года назад

Thnk you very much

@ftech2456 4 года назад

sir how to back in 192.168.0.1 please

@humzabbaskamboh 4 года назад

I can installed it now How can we data access limit to all wlan users

@khurramhashmi2306 4 года назад

THANKS BRO ITS WORKING PROPERLY. BUT MY ROUTER LED ITS OFF NOW ITS IS POSSIBLE TO ON TELL ME

@LennonBoxo98xD 4 года назад

here! How to create captive portal?

@belonkaa 5 лет назад

not working on wr-940n v6 ((( error 18005 after this wifi ssdi change

@richardlloydusa 5 лет назад

Reset the router to the factory defaults and try it again. I have another video showing you how to fix this error using a different method here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_Ep_EU_U50Q.html Thank you for watching and commenting. I appreciate it greatly. All the best.👍😀

@ザカリア-l8d 5 лет назад

It is working on WR940N v6. I just tried it few minutes back.

@vitorrigolon123 4 года назад

Thanks.. Worked on my WR940N V6 (EU Version) I did some aditional steps... maybe can help someone. A quick resume: 1) Downgrade the original firmware to the oldest one. I downloaded from www.tp-link.com/pt/support/download/tl-wr940n/v6/?#Firmware 2) After the downgrade, the router is factory reseted. Access 192.168.1.1 using LAN CABLE (I used a normal cheap cable). 3) CHange the SSID to each these lines, one by one and saving `echo "httpd -k"> /tmp/s` `echo "sleep 10">> /tmp/s` `echo "httpd -r&">> /tmp/s` `echo "sleep 10">> /tmp/s` `echo "httpd -k">> /tmp/s` `echo "sleep 10">> /tmp/s` `echo "httpd -f">> /tmp/s` `sh /tmp/s` after the last line the router sleep for 15 seconds 4) wait 15 to 30 seconds and access 192.168.0.1 (yes, the ip changed) and now you can use non-oficial firmware.

@ahmadmulyadie4208 2 года назад

OMG, it's works, thank you bro

@richardlloydusa 2 года назад

@vplpatil99 5 месяцев назад

Thanks sir

@richardlloydusa 5 месяцев назад

You're most welcome and thank you so much for commenting and the very kind words. I appreciate it greatly. Subscribe, Click The Bell and stay tuned! All the best.👍😀

@ambokue6458 4 года назад

I have Tp-Link Archer C9 v1 US, Firmware 3.17.1 Build 20180125 Rel.56387n, Haven't suceed trying several time, both on 2.4 and 5Ghz Network name. after last command, it is not restarting. It also showing error code -5533 before hit back button and showing error Code 18005. I also did factory reset and set the current time. My main reason to install DD-WRT is my Router 2.4Ghz is on and off repeatedly. I read some articles upgrading to DD-WRT can fix my problem. Anyone has information which version number of DD-WRT suit for my router? Thanks

@pachekingsta779 5 лет назад

Thank You So Much .. You Help My Day Sir.... Im Your New Subscriber Now.... Greetings From Indonesia.. GOD BLESS

@erickperes0495 4 года назад

Hi Richard, I'm trying to upgrade my firmware, it's TL-WR740N version 3, but doesn't work and the error 18005 keeps. But my TPLink Interface is a little bit different of yours: after each saving doesnt show the blue border and shows this msg below: "The change of wireless config will not take effect until the Router reboots, please click here to reboot". Please, I need your help.

@richardlloydusa 2 года назад

Thank you for watching and commenting. I appreciate it greatly. All the best.👍😀

@zzainnaliarq 5 лет назад

Please help with tp-wr940n v6 when you want to return from system "dd-wrt" to the original system of the router installed WR941n system error and became the router to respond and does not work just works flashing blue light What do I ask you to answer my message

@richardlloydusa 5 лет назад

I have several videos on how to recover this router here: goo.gl/bHWUav Thank you for watching and commenting. I appreciate it greatly. All the best.👍😀

@ayan.debnath 4 года назад

Did not work for WDR4300. Can you pls suggest?

@UserSub 4 года назад

That's exactly what I needed, thank you! Worked like a charm on TP-Link WR841ND v9. Would be great if this guide was included in the installation Wiki on official DD-WRT page.

4 года назад

UserSub why did you choose dd-wrt over openwrt for 841n? every results I googled said openwrt is better :) I will “hack” my router tonight, your opinion might change my decision :))

@theoldman6 5 лет назад

I Have tried it on my tp-link C7 and it and did not work now would i have to do it on both 2.4 and 5.0 wireless i just did it on 2.4 the first one is that how you did it on your C9 and THANK YOU

@richardlloydusa 5 лет назад

I used the 2.4 GHz on my C9 it may be a difference in the model. I will see if I can find a C7 to experiment on. Thank you for watching and commenting. I appreciate it greatly. All the best.👍😀

@قائمالمحمد-ع8ف 4 года назад

بليس من شرح وقوع السوفت في راوتر tplink941v5بس لمبه الباور منورة

@aldohenrycho 4 года назад

Thank you really! Tried lots of "solutions" and nothing worked but this did the trick! Successfully upgraded my old WR740N to dd-wrt :) now i'll use it as repeater bridge!

@richardlloydusa 2 года назад

Glad it helped

@mafusail1900 4 года назад

Спасибо, получилось

@bigjim163 5 лет назад

Another informativ video.. Very good Thumps up :O)

@richardlloydusa 5 лет назад

Thank you so much for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀

@theoldman6 5 лет назад

Thanks you have a lot of info really LIKE your shows I will try it on my TP-LINK C7 nad hope it works

@richardlloydusa 5 лет назад

You are most welcome. I have tried it now on three TP-Link routers including a C9 and it worked every time. Please get back to us on your results with the C7. Thank you for watching, commenting and the kind words. I appreciate it greatly. All the best.👍😀

@mr.simmonds5681 5 лет назад

@@richardlloydusa I bought an Archer C9 v2 and I have tried your method of unlocking. I tried on the 2.4Ghz and 5ghz band but it will not accept the firmware. Any suggestions? I even did a factory reset. **UPDATE** I even tried flashing to EU/UN Firmware after watching your video on how to unbrick a C9 router and it did not work. I am guessing if you live in the US you're forced to use TPlink's garbage firmware.

@davidblais170 4 года назад

Thank you so much, you do have to concentrate while copying from is comment in order to take only one entering and ending ' Here is an enhanced version easier to copy. By the way I have the WR940N(CA) v5.0, I took the US version from DD-WRT. `echo "httpd -k"> /tmp/s` `echo "sleep 10">> /tmp/s` `echo "httpd -r&">> /tmp/s` `echo "sleep 10">> /tmp/s` `echo "httpd -k">> /tmp/s` `echo "sleep 10">> /tmp/s` `echo "httpd -f">> /tmp/s` `sh /tmp/s`

4 года назад

this is the easiest solution I found on internet, thank you very much!!! my tl 841n now run openwrt smoothly there is a small difference in my case: after click [save] button, my page go blank in 1-2s instead of show blue border on button