Essential DIY Install Tips for Insinkerator Badger 5 and 500 (Avoid the Frustration)

Подписаться 66 тыс.

Просмотров 189 тыс.

50% 1

Amazon Link - amzn.to/1Rw8KKz
About InSinkErator
For over 75 years InSinkErator has been known for building the world's best food waste disposers. Badger, our standard disposer line, is basic, reliable, and functional. Available in various models and sizes for a range of applications, InSinkErator also manufactures a premier line of disposers, the Evolution Series. InSinkErator food waste disposers are the only disposers that are proudly made in the U.S.A. InSinkErator has grown into the largest food waste disposer manufacturer and best-selling garbage disposer brand in the world.
InSinkErator Badger 5 1/2 HP Garbage Disposal
Badger garbage disposals are a reliable and functional choice when affordability is the prime concern. From the powerful induction motors to the rugged galvanized steel construction, the Badger 5 food waste disposer delivers exceptional performance.
We Come to You Parts and Labor Warranty
The Badger 5 is backed by an exclusive We Come to You 2-year In-Home Limited Warranty. This warranty includes free house calls (including parts and labor) for the entire warranty period. InSinkErator fulfills its in-home warranty through a network of 1500 professional service agents who are trained and certified to install, repair or replace InSinkErator brand disposers.

Хобби

Опубликовано:

25 апр 2015

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 81

@ericdolgas9346 6 лет назад

Dude my dad and I spent like an hour trying to get the damn mount to hit the notches. This video is the best thing that ever happened to me. Once we saw those tricks we got it the first try. Thank you thank you thank you

@royaljumble5020 5 лет назад

I was in his dad's shoes. I used some VERY colorful language. Your video helped me finish the job within 5 minutes. THANKS!!!

@yojo7849 4 года назад

Thanks for this detailed video. Spent way too much time trying to figure out this mounting ring while trying to hold up the unit. At first my ring wouldn't stay flush. Good job!!!

@OrthodoxAtheist 2 года назад

4 years later, I'm doing the same (albeit only 20 minutes before seeking the help of the interwebz). Ditto, less than 1 minute after watching this video, on she goes. Thank you Poolarity! That was really f'ing annoying. lolz

@stan5409 2 года назад

I saved this video for two months before I finally installed my GP yesterday. I didn't remember I saved this video in a folder and ended up using another installation video. BIG MISTAKE!. I also wasted an hour trying to attach the new unit due to the flange being at the bottom of the threads. It kept attaching unevenly and I finally figured out the problem on my own. Time would have been wasted if I remembered I had this video. BTW, a great tip is to use a car jack to make it much easier to hold in place during the install

@krisanderson3709 3 года назад

You posted this video 6 years ago and it 2021 and your video is better then any of the ones I have watched. Mounting the disposal is a major pain. When you watch clips of these handy men installing the disposal they say now you just screw it on, then they cut the video and it magicly is on. No one will show themselves actually mounting it. I thank you for your tips. I hope you are doing well

@Bodie007 4 года назад

A real public service, this is. Thanks for taking the time to help folks out.

@SteelBlueVision 5 лет назад

Who the heck downvoted this video? It is full of AWESOME advice that will save hours and your back!

@BigEd72074 8 лет назад

Awesome tips! I wish I had seen your video first. The others were absolutely helpful for other issues but gleaned over the reattachment. Figuring out from your video to have the ring high on the thread and seeing exactly how the pieces fit together was key. Thanks so much for posting this!

@melissaant6015 8 лет назад

Thank You! Thank You! Thank You! I was having the same issue. Once I knew what to look for I was able to fix it in less than a minute. You did a great job explaining things.

@eden2010grace 5 лет назад

I didnt pop the plug from the dishwasher attachment. That caused my washer to act up. After watching your video, it all made sense. Thank you for the info.

@MrBob-vc4qd 8 лет назад

Thanks for the advice about moving that black rubber part up higher. Been fighting with that for a half hour. After moving that part up, I had it installed in 5 minutes. I might also add...When turning that metal ring, make sure it snaps into place, you will hear it. Thanks again buddy!

@Verses01 7 лет назад

Thank you so much for the tips! What was difficult for you translates to 1000 more of us with the same issues, so thank you again.

@narnold8157 7 лет назад

Thank you for this excellent video that breaks down the uninstall instructions. The tip about having the flange all the way to the top is very much appreciated.

@BayPerry 6 лет назад

Worked for about an hour and couldn't get it to screw on saw your video lifted it to the top worked instantly your my new hero

@PoolarityChannel 6 лет назад

Bailey Perry been there, I feel your pain, haha!!!

@chexstix 2 года назад

“ Sometimes we don’t read the instructions”… Oh, SO true!!! I failed to knock out the plug And so my dishwasher refuse to drain. Thanks so much for this video!

@coldfriday 7 лет назад

The two lever removal tip was just what I needed. Thanks.

@vaultboy6985 3 года назад

Extremely helpful video, thank you! Also, I used a car jack to help with removing the old Badger and installing the new one. Made positioning a lot easier than not, lol

@winrobgaming7113 2 года назад

Thank you! Was having trouble reattaching the mount ring. It was too low like you warned.

@StewartLMcGill 8 лет назад

Thank you very much. i just spent 90 mins driving myself crazy trying to re-mount my cleaned out unit. I could not get the locking tabs anywhere near the locking ring... i thought i had it as high as it would go. your video showed me that i needed to go higher with a little force. easily locked on in 2 mins. thanks again.

@PoolarityChannel 8 лет назад

Glad I can help. That drove me crazy too, plumbing problems that make you want to throw a temper tantrum, when something that you think should take 30 minutes end up taking 2 hours.

@alphamale3141 2 года назад

Thanks Buddy!!

@humbleman9308 7 лет назад

thank for the dishwasher seal tip. I now have a working dishwasher!!

@markspott1741 6 лет назад

Thanks, mine just broke and by your video instructions, I think I can do this myself! At least I hope! Thx again!

@bagoquarks 7 лет назад

Nice video. I would add that the edges of the sink hole are sharp so take care when removing the old putty.

@peterboyce6320 6 лет назад

Thanks for this video. I could not get the flange with the tabs up high enough. Your video showed me that I had to use "considerable force". Once I did that it went right in. One suggestion: I used a scissors type car jack to raise the disposal up and hold it in place while I got the flanges engaged. That worked like a champ, and made the job much easier.

@tankareno 8 лет назад

Awesome tip using the allen keys to unscrew the old unit. Thank you for taking the time to make this video:)

@PoolarityChannel 8 лет назад

+tankareno You welcome, I went through the pain, so you don't have to. Hopefully.

@shakobe 8 лет назад

I'll second this--I never would have thought to do that and it made getting the old one off and the new one on a piece of cake. Thanks!

@Vesigoth 6 лет назад

Great install tips. Thanks for posting.

@finitopro822 8 лет назад

you are the best. solved my problem. thank you

@BrendaK555 8 лет назад

OMG! Thanks so much for this video! I could not get the unit screwed on because the ring was stuck so low!! Your video allowed me to complete the job with far less frustration!!!!!

@PoolarityChannel 8 лет назад

+Brenda Johnson Always wonderful knowing I made someone else's project less frustrating. I was ready to throw stuff, when I was trying to figure out if there was anything wrong with mine or if its just something I wasn't understanding. But so very glad this helped!

@eltede13 8 лет назад

+Brenda Johnson I echo your post. I went to other videos before getting to this one. Thanks so much for the help.

@StewartLMcGill 8 лет назад

ditto. same problem. same solution. i was almost at the point where i was going to give up. thanks +poolarity

@PoolarityChannel 8 лет назад

Glad I can help. These plumbing jobs can be nightmarish. Seems like this issue is very common, just very glad I can help, thanks!!!

@reginaldsanders6018 5 лет назад

One of your tips really helped me. Thanks!

@JorgePerez-eh1ub 6 лет назад

Excellent video and very clear explanation, thank you very much for the good tip

@rusavolk 6 лет назад

thank you for taking your time for this video, helpful.

@TheSoutholive 6 лет назад

Good tips thanks

@StepRey21oh 7 лет назад

Viewing this and other videos before my install. Appreciate it.

@PoolarityChannel 7 лет назад

StephanReyMartinez Hopefully it's just a 30 minute job for you, good luck.

@gurumantrakhalsa17 5 лет назад

I'm in the middle of the exact quandy. Thanks for posting. I was beginning to think there was something wrong with mine. Should be way more bullet proof than it is. Sound mounting concept, but weak install instructions. Thanks for sharing.

@lmntrlmntr3496 5 лет назад

Excellent Information. Thanks.

@fishing4happiness610 6 лет назад

Awesome.... thanks!

@milkhauler6587 7 лет назад

Thank you.

@charlessalde8707 6 лет назад

Excellent tips sir...

@mikesilva2547 7 лет назад

Really helpful tips, appreciate it man!

@AC-xs1ff 6 лет назад

Superb tips if a bit verbose. Thanks for making this video!

@PoolarityChannel 6 лет назад

Thanks! Yes, I tend to ramble non-nonsensically and inarticulate... need to improve on that!

@ronaldmcdonald3965 6 лет назад

thanks

@JohnH242 7 лет назад

I just replaced an old version with a new version of the Badger 5. For some reason they redesigned the mounting plate. Specifically the plate that goes on the disposal. I am not sure if it had casting issues or just a bad design but I could not get it to mount under the sink when I set it on the ground and took the rubber piece with flaps to keep stuff from going down the drain off. it mated up but with some effort to align it just right. when I put the rubber piece back in no way could I get it mounted . I pulled the plate off the old unit and used that it mounted just fine

@RickTorn 6 лет назад

When pointing out the dishwasher knockout plug, you need to point to the INSIDE of the inlet tube instead of continuously pointing to the outside of the tube.

@royaljumble5020 5 лет назад

Screw the haters! Thumbs up!!

@Smith-ql7wr 6 лет назад

a wanna be tough guy mindlessly jugged my disposal out of place. Thinking brute force is a fix to everything, the jerk couldn't get it back mounted. I kicked him out of my house. Later what i thought to be a penny that flew into the disposal causing it to lock and not spin, was ironically a small Allen Wrench. Now i have to figure out how to remount. Going to try this. Thanks buddy

@gabrielmartinez-ls5cp 4 месяца назад

How do you get the locking ring on to the disposal? Mine came with it off and I’m dying out here tryna get it back on

@Internetpilot 5 лет назад

Rather than using the tiny hex wrenches just use a couple of screwdrivers which have much larger handles and allows you to use a lot more force.

@deekay2 5 лет назад

Does the silver lower mounting ring around the top of the disposal thread on somehow, or does it stay in place only by the rubber seal mounted above it? If you remove the rubber seal, does the silver mounting ring simply come off?

@antoniocantu2622 5 лет назад

This model come with a tool to turn the clamp. Same tool for turning gear at bottom.

@RaymondLo84 4 месяца назад

1:50, no that's not how it works. You should keep it in the last lock up spot so you can just hold on to the unit and rotate! and once it locked on it will release as it will get pulled up and will release from the lock. It's actually by design!

@ericwalters3295 7 лет назад

I used a small floor jack to hold up the disposal.

@EJP286CRSKW 5 лет назад

I used my car jack. Easy as pie, and no Allen wrenches or large forces required. Just a tiny amount of brains.i was able to both remove it and replace it by hand. And I've had mine for 22 years, no problems at all until a small teaspoon finally got itself jammed inside.

@laurapetsch2943 4 года назад

I used a bucket and a book! Used what I had at that moment! The disposal was heavy when trying to get in locked in when seated on the floor!

@frankyu6984 4 года назад

@@laurapetsch2943 , LOL, that's what I used tonight, no luck still. Will try again tomorrow.

@111bobgato 7 лет назад

Thanks a lot? This was really helpful? This was a frustrating install?

@PoolarityChannel 7 лет назад

Only frustrating when the flange came shipped seated so low and you needs some considerable force to move it up, which was unexpected since it shipped that way. But other than that fairly smooth install

@stephenfiore9960 6 лет назад

My bottom ring fell off the disposal altogether and doesnt want to stay on. Anyone else have this problem? I'm wondering if a part fell off when I wasn't looking.

@manuelmoraleda9285 4 года назад

I have an idea I like share that's not mentioned anywhere - Use the ordinary car jack to lift and help you align and rotate that disposer in a confined space. I've done it 3 x already. Use liquid soap to lubricate that rubber part. I know I envy those demonstrating on RU-vid however I tell myself that these guy have done several dozen times hence it's a breeze.