Ethos Glider Preset Mixes

Подписаться 70 тыс.

Просмотров 11 тыс.

50% 1

Full house glider setup using the Ethos Glider Preset Mixes.
Tandem X20 radio, X8R receiver.
Phoenix 1600 sloper model.
Thanks to Jeff Yang for the suggestion.
Butterfly or Crow brakes, Aileron and Rudder mix, Full span aileron mix, Camber mix.
Like, Subscribe & Ding the 🔔 - bit.ly/ANsubscribe
🔎 More information 🔍
► Newton Airlines Uncut - bit.ly/NewtonAi...
► Newton Airlines blog - newtonairlines....
► My portal - anewton.net
► My Thingiverse - www.thingivers...
► iNav Basics and FAQs - newtonairlines...
► Depron Armin Wing build - • Depron wing build
► Skyshark P4X spars - www.kitesandfu...
► GBC EZLOAD laminating film (May be discontinued) - shop.quadient....
► Alternative 75 micron laminating film (not tried by me) - www.boundtoimp...
👌🏽Support this channel 👌🏽
This is a fun hobby for me, not a money making venture. I don't have a Patreon account, and choose the minimum possible advertising option.
However if you would like to show your appreciation and support this channel here are some options -
►Paypal donations to apnewton@gmail.com
►Affiliate links - Purchase using the links provided in the video description.
If you use the affiliate links to make a purchase I may receive a commission at no extra cost to you.
👀 No single review will tell the whole story. Be clever, watch other reviews and shop around before making any purchase.
#AndrewNewton #Ethos #glidermixing

Опубликовано:

14 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 62

@enriquekramer4590 Год назад

Thanks, Andrew for the great review. That kind of wizard is what I hope Edge TX 3.0 will have. It would be fantastic!

@2.4g-rc Год назад

This is EXACTLY what I needed. Thank you. Just bought my first TX running Ethos so needed this.

@AndrewNewton Год назад

Nice gear, it will serve you well

@jonoedwards4195 Год назад

Swooosh!! Everything You said, went straight over Me Head? Ahahahaha. Gimme a home among the Gumtrees. Beauty Andy, All the best.

@AndrewNewton Год назад

Just like a glider should. Have a better one Jono

@thenatedog Год назад

I usually set this all up from scratch too. For instance, I usually put flaps on the throttle stick. And it's always a pain trying to get that working. I'll have to try this out. Looks like I could save a lot of time and frustration.

@AndrewNewton Год назад

I haven't used throttle for flaps, but I'll give it a go.

@winstonsmith7801 Год назад

I like the ethos operating system , it seems quite intuitive.

@7demo7review Год назад

Andrew,, thanks for the rapid response with the video… super clear, It was the small settings that I’m not familiar with that tripped me up. Once I learn thaws things once they become engrained in my memory. With this great power I will only use it for good,, lol. I flew the ASW28 this morning with just normal flaps and she flew amazing. It was my first flight with the X20s and it felt great in the hands. I think it will be a great radio going forward

@AndrewNewton Год назад

Hope it helps Jeff.

@thenatedog Год назад

What wingspan Jeff?

@7demo7review Год назад

@@thenatedog a bit over 2m I believe

@miksterr Год назад

Andrew, a great, clear tutorial. Thanks and Merry Christmas.

@AndrewNewton Год назад

Same to you!

@hydrojet7x70 Год назад

Awesome video. Thank You!

@GrandadIsAnOldMan Год назад

Merry Christmas and lets hope for a happy new year ⛄🎅🏼🎄 There is an awful lot of buttons on that transmitter 🤔

@AndrewNewton Год назад

Thanks Grandad. Too many buttons is not enough.

@rodolfofin1938 Год назад

Grazie per l esposizione come sempre Al TOP Ti auguro Buon Anno e a tutti gli amici del gruppo

@AndrewNewton Год назад

Grazie Rodolfo

@knutneumann2397 Год назад

Very nice radio, well explained. Pity crow braking isn't doable on the throttle stick. Thanks Andrew and Merry Christmas

@AndrewNewton Год назад

Thanks Knut. I think you just have to choose Throttle instead of the switch

@knutneumann2397 Год назад

@@AndrewNewton Sorry Andrew is that a "I think "or a "I know". Because it makes the world of difference for landing gliders, using the throttle stick for crow braking. You should try it.

@AndrewNewton Год назад

Would you then put motor on a switch?

@Radian327 Год назад

@@AndrewNewton Throttle on left slider.....

@knutneumann2397 Год назад

@@AndrewNewton yes, I have mine on a 3 stage switch. Off, half and full power. I wouldn't have it on a power plane, but a glider has the motor only as a means to get hight, apart from that I don't use the motor.

@gregorymoss7305 Год назад

Very helpful video Andrew, can you tell me where to get those stick ends on your radio, thanks, Greg.

@AndrewNewton Год назад

Thanks Greg. I printed the stick ends, Thingiverse page in the description

@V4nd3rTr1p Год назад

Good video!! I will buy this model!! I have a doubt, how do you charge the battery of the X20 transmitter?

@AndrewNewton Год назад

USB charging built it, or out of the transmitter charge with a 2S Lipo charger

@banko4509 Месяц назад

Hi Andrew, I'm new to FrSky and have found your videos very helpful so far. I have an X20RS and am presently setting up a couple of competition F5J gliders. I am seeking assistance at this time in relation to the flight timer. Flight time is critical for F5J ensuring that landing can be achieved prior to the horn sounding for the end of working time. I have set the timer up with the timer to start when I start the motor and launch. The motor is on a 3 position switch with off, half power on middle position and then full power on the 3rd position. I need the timer to start whether I launch at half or full power positions and I need it to continue running if i vary between these 2 motor power positions in the launch time of the flight. Essentially I need the 3 position switch to be on in both the middle and 3 positions. Would appreciate any guidance you can provide. Thanks Evan

@AndrewNewton Месяц назад

Greetings Evan. I don't use timers so might not be a lot of help, I'll have a play with mine anyway. Have a look at Steve's video on Ethos timers ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-qjmix45yIEQ.html

@AndrewNewton Месяц назад

I think I have it. Let's call SA your throttle switch. Timer Start Condition needs to be !SA^ (which means SA is not up. SA up is the zero throttle position) and change Stop condition to Custom with nothing entered as the condition. Then I would use a momentary switch to Reset back to the start time.

@banko4509 Месяц назад

Excellent @@AndrewNewton working a treat - cheers Evan

@AndrewNewton Месяц назад

@@banko4509 Ah brilliant. Might have to do a quick tip video.

@user-rx8qq8sk9ydv1ce5ib 4 месяца назад

Thanks for sharing, would be nice to know from where you got the red sticks' covers, are they part of the accessories or purchased separately. Thanks

@AndrewNewton 4 месяца назад

I printed these www.thingiverse.com/thing:4539793 but Frsky also sell others

@user-rx8qq8sk9ydv1ce5ib 4 месяца назад

@@AndrewNewton thanks a lot 👌

@FourthWayRanch Год назад

we have to have ailerons on two separate pins to do crow then unless u have those fancy new digital servos i guess

@AndrewNewton Год назад

Correct. Always need 2 channels for ailerons with crow or flaperons

@petrpogorelov Год назад

Hello Andrew! could you make a video on setting up a dlg airframe with an archer gr6 receiver? What mixes are used and will 6 channels be enough for dlg? Thanks

@AndrewNewton Год назад

Yes, good idea, added to the list. Only need 4 channels for a DLG

@MrVasmikey Год назад

Looks a lot like my Jeti DS-24. Very similar.

@AndrewNewton Год назад

Not very

@MrVasmikey Год назад

@@AndrewNewton what? It’s a knock off and you know it. I’m pretty sick and tired of their shenanigans. Now I’ve heard they have violated the open source code agreement by putting out a closed fork version of expressLRS. Their products are dead to me. If you continue to support them you will lose this one subscriber.

@AndrewNewton Год назад

"If you continue to support them you will lose this one subscriber" Well thanks for your input so far, bye bye

@stevecopelin5264 Год назад

Question for you Andrew, love the vid, makes it easy. So have crow working, well sort of on a switch. Both Flaps down, but one aileron will move slightly down, not up. I've change 'inverted' in the output but that only makes both ailerons go the same direction. Is there something in the mix i'm missing? Taa

@stevecopelin5264 Год назад

All good Andrew, i reset everything and manually created the mix, seems something isnt right with the butterfly mix and my Pulsar.

@AndrewNewton Год назад

Don't INVert the Output, that changes it for ailerons and crow mix. Just adjust the weight of the aileron line in the Crow mix. It starts as 10% I think, may need to be something like -30%

@stevecopelin5264 Год назад

@@AndrewNewton All good, reset the model from the start. Still cant work out why it did that. All working now. Thanks again

@craigjones4587 Год назад

Andrew can you show me how to adjust the servo speed in butterfly mix in ethos so it comes on slow and goes off fast - cheers

@AndrewNewton Год назад

Ask MrD Falling with style. He is the Ethos expert

@FourthWayRanch Год назад

i think its in the outputs, there's a delay or time, you can do it for flaps too

@skrswift Год назад

Andrew, Im hoping to use many of my G-RX8 vario receivers with my new Frsky X20 Tandem Txr will the vario still be usable?

@AndrewNewton Год назад

Yes, still compatible

@billrenfro7113 Год назад

What do you mean when you are putting a mix on 1st or 2nd position?

@AndrewNewton Год назад

First or Last? It's just where the mix appears in the list on the Mixer screen

@billrenfro7113 Год назад

@@AndrewNewton Thanks. Great video.

@richarddoberstein6219 Год назад

Who Buys Frsky Radios? I thought we were suppose to be boycotting them as a community.

@AndrewNewton Год назад

I smell a troll. Lot's of great FrSKY gear here www.youtube.com/@AndrewNewton/search?query=frsky

@rickster-fpv1818 Год назад

@@AndrewNewton no troll here just someone who has many planes, drones and 3 radios, who has kept track of Frsky's history and reputation for screwing over their customers. Now they are going to make a ELRS radio that is not upgradable past V2.4 LOL

@MrVasmikey Год назад

Looks like they are knocking off Jeti. No end to this!