Every Engine Layout Explained

Подписаться 9 млн

Просмотров 3,3 млн

50% 1

Thanks to Keeps for sponsoring this video! Head to keeps.com/b2b to get 50% off your first order of hair loss treatment.
You know about inline engines, v engines, maybe even a VR engine layout, but do you know the W, the U, or the H engine?
HERE IN MY GARAGE…
Curious what we use in the shop on a daily basis? Check it out below. And if you purchase these tools from these links, you’re helping support Donut. We appreciate it!
Milwaukee Electric Tools 2550-20 M12 Rivet Tool (Bare Tool) www.amazon.com/gp/product/B07...
Milwaukee - 48-22-0125G - 25 ft. Magnetic Tape Measure - 2-Pack
www.amazon.com/gp/product/B08...
Milwaukee 48-59-1880 M18 REDLITHIUM HIGH OUTPUT XC 8 Ah Lithium-Ion Battery and M18 /M12 Charger Kit
www.amazon.com/gp/product/B07...
Milwaukee Angle Grinding 2781-22 M18 Fuel 4-1/2"/5" Slide, Kit
www.amazon.com/gp/product/B00...
Milwaukee 2735-20 18V Li-Ion Flashlight
www.amazon.com/Milwaukee-2735...
Milwaukee 2557-20 M12 Fuel 3/8" Ratchet
www.amazon.com/gp/product/B07...
Milwaukee 48-11-1880 M18 REDLITHIUM HIGH OUTPUT 18v 8.0 Ah Lithium-Ion Battery Pack
www.amazon.com/gp/product/B07...
Milwaukee 2125-21XC M12 LED Underhood Light Kit
www.amazon.com/gp/product/B07...
Milwaukee M18 FUEL 3/8" Compact Impact Wrench with Friction Ring
www.amazon.com/Milwaukee-Comp...
Adenna Dark Light 9 mil Nitrile Powder Free Exam Gloves (Black), Large - Box of 100 (DLG676)
www.amazon.com/Adenna-Light-N...
Scott Shop Towels Original (75143), Blue, 55 Sheets / Standard Roll, 30 Rolls / Case (10 Bundles of 3 Rolls), 1,650 Towels / Case
www.amazon.com/Scott-Original...
Zep Cherry Bomb Industrial Pumice Hand Cleaner - 48 Ounce (Case of 4) ZUCBHC48CA
www.amazon.com/Zep-Cherry-Cle...
AIDEA Microfiber Cleaning Cloths-100PK
www.amazon.com/AIDEA-Microfib...
Barrow 52 in. Brown Large Rectangle Wood Coffee Table with Lift Top
homedepot.sjv.io/c/2095194/45...
Barrow 52 in. Brown Large Rectangle Wood Coffee Table with Lift Top
homedepot.sjv.io/c/2095194/45...
New to the Channel?
►Watch this: • POPULAR DONUT VIDEOS
We upload almost every day, subscribe so you don't miss out!
►Subscribe here: bit.ly/1JQ3qvO
Click here for more info on joining the Donut Underground!
► / @donut
Shop Donut Merch:
►www.donut.media/
Donut Media is at the center of digital media for the next generation of automotive and motorsports enthusiasts. We are drivers, drifters, and car enthusiasts who love to tell stories.

Авто/Мото

Опубликовано:

22 фев 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 6 тыс.

@ellisongaulding4816 3 года назад

Whoever decided to add a progress bar to the sponsored portion deserves the same respect as whoever added the skip intro button on Netflix

@shab-re5334 3 года назад

user sponsor block, it'll blow your mind (it's an extension which gives a skip button for sponsors, subscribe reminder, merchandise promotion, intro outro etc)

@Vex22778 3 года назад

RU-vid vanced

@szewal 3 года назад

I swear to god at least 500 people comment this on every single video they post

@lownslownx7880 3 года назад

Donut makes pretty good ads tho

@itsBRADduh 3 года назад

@@lownslownx7880 NO, JERRYS ADS ARE FUCKING TRASH AND ANNOYING. The rest of the videos are good tho. his ads are just super cringey and annoying as all hell!

@suryavelchandra2975 3 года назад

Its insane how many ways there is to convert little explosions into spinny

@aceggkspade958 3 года назад

Or Toyota working on the hydrogen engine

@TotallyNotASpy1 3 года назад

*Explosion* "SPEEeEEeeEeEeEEN!"

@LukmanSantoso13 3 года назад

Combustion not explosion, but yeah whatever, nobody care.

@prescottmajette5290 3 года назад

And they didnt even start talking about jets or turbo props.

@oskarskates 3 года назад

@@LukmanSantoso13 yup your'e right; nobody cares

@Buenopablito Год назад

Dude I’m learning more about mechanics stuff with Donut than anything in my entire life. This channel is pure gold.

@CountDuckula83 Год назад

Agreed. And hilarious. Love these guys.

@namansinghal617 11 месяцев назад

Fr,all of my knowledge about cars comes from this channel

@46GanG 6 месяцев назад

Yea I know right!

@kaydensrailway5594 2 года назад

Fun fact: Opposed piston engines were also used on the British Railways Type 55 ‘Deltic’ diesel locomotives. These were based of a prototype built by English Electric and could regularly run at 100 mph on the East Coast Mainline, making them worthy replacements for Gresley’s famous A4 steam locomotives.

@kyle_mk17 9 дней назад

Diesel electric or engine-to-shaft-to-wheel type of engine?

@danekane7511 2 года назад

i love how in the animations of the engines the piston rods just noclip through the crankshaft

@traziverse 2 года назад

Read this exactly while realizing it😂

@traziverse 2 года назад

@@dingo-gorditas csgo console?

@dingo-gorditas 2 года назад

@@traziverse no you russian (it's a joke please don't run me over with a VAZ 2109 please) every source engine game uses that

@traziverse 2 года назад

@@dingo-gorditas блядь didnt know that

@caliandrews626 2 года назад

I’m a dummy with kind of stuff. I don’t know how that actually works because I’ve been trying to figure out how it would go through the bar like that. I know it wouldnt go through it but how does it work?

@fjdynames2552 3 года назад

Can we just have a little appreciation for the person who had to animate these engines? Simple and effective. Love it.

@alexs5968 3 года назад

It made me so angry though because the crankshaft was completely straight so you could see the pistons clipping through

@faraazshaikh1834 3 года назад

That's what pissing me

@LucidSonder 3 года назад

Could someone point me to an animation or explanation that shows how the pistons don't go through the shaft?

@andrewgatt4159 3 года назад

Rightttt

@sunlitgarden7173 3 года назад

@@LucidSonder www.alamy.com/pistons-and-crankshaft-image7894969.html?pv=1&stamp=2&imageid=C642B8C1-470A-4B02-86C3-E961B2915648&p=27644&n=0&orientation=0&pn=1&searchtype=0&IsFromSearch=1&srch=foo%3dbar%26st%3d0%26pn%3d1%26ps%3d100%26sortby%3d2%26resultview%3dsortbyPopular%26npgs%3d0%26qt%3dcrankshaft%26qt_raw%3dcrankshaft%26lic%3d3%26mr%3d0%26pr%3d0%26ot%3d0%26creative%3d%26ag%3d0%26hc%3d0%26pc%3d%26blackwhite%3d%26cutout%3d%26tbar%3d1%26et%3d0x000000000000000000000%26vp%3d0%26loc%3d0%26imgt%3d0%26dtfr%3d%26dtto%3d%26size%3d0xFF%26archive%3d1%26groupid%3d%26pseudoid%3d%26a%3d%26cdid%3d%26cdsrt%3d%26name%3d%26qn%3d%26apalib%3d%26apalic%3d%26lightbox%3d%26gname%3d%26gtype%3d%26xstx%3d0%26simid%3d%26saveQry%3d%26editorial%3d1%26nu%3d%26t%3d%26edoptin%3d%26customgeoip%3d%26cap%3d1%26cbstore%3d1%26vd%3d0%26lb%3d%26fi%3d2%26edrf%3d%26ispremium%3d1%26flip%3d0%26pl%3d

@Ben-ex1kv Год назад

Honestly this is one of the best explanations of engine mechanics I've seen. I'm working on building a solar powered steam engine for green energy and this helped my understanding immensely!

@PhycoKrusk Год назад

Piston or turbine?

@Ben-ex1kv Год назад

@@PhycoKrusk currently working on a piston engine that was originally a belt driven air compressor. When I've got more tools available I'd love to look into turbines.

@PhycoKrusk Год назад

@@Ben-ex1kv I hope it works out for you. Turbines are complicated even if they are more efficient, but regardless, a solar-powered steam engine sounds extremely neat. The only question I would have is how well it will scale up; it should be fairly easy at the science fair project level, but I'm more interested in the consumer level. I know my father is too, and if he ever gets time, this may pique his interest for tying into the napkin diagrams for gravity batteries he's been working on for the past few years (so far as I know, they haven't moved beyond that point).

@conductorcammon Год назад

How r u gonna boil water? With solar?

@DixieRect Год назад

aye bro be careful, dont get unalived by you know who

@Super_Beast124 Год назад

This was so well made, and clearly explained, plus the visual aid graphics are perfect for an amateur like me to easily understand the way these motors are designed to function. Found this video while trying to explain to my daughter what a rotary engine is. And I don't normally watch video's like this, not a huge car fan, but this video hit different lol. We watched the entire video start to finish and we both learned way more than expected. Impressive

@Zzzlol94 3 года назад

It’s just so funny how Inline engines go: 1-cyl: Oldsmobile Curved Dash with 5bhp 2-cyl: Fiat 500 with 13bhp 3-cyl: Koenigsegg Gemera with 600bhp

@JohnDoe-ph6if 3 года назад

thats cus the volume in gemera is huge

@gregrose5387 3 года назад

@@JohnDoe-ph6if kenigseggs 3 cylinder uses very advanced tech

@gamefreaknitro 3 года назад

It has 2 electric motors as well so it might be cheating lol

@krystal_vector5412 3 года назад

@@gamefreaknitro The 600hp figure comes solely from the combustion engine, the electric motors add to the total power output, combined the car has somewhere near 1700hp

@EddieRod 3 года назад

@@krystal_vector5412 But the real hero in the keningseggs engine is the twin-turbo set-up. Without it, it would not be able to have such output. Clever design, and brilliant engineering by all means. That it's a VVT. Efficiency to the max.

@Csongor_Radai 3 года назад

“I don’t think i missed any engine types” Radial engines: Am i a joke to you?...

@xiaolaizheng6740 3 года назад

Perhaps because they were used on the plane...

@wall7103 3 года назад

Find an instance where one was put in a car, then throw it in the trash. Lol.

@brrebrresen1367 3 года назад

radial engines mostly have been modified to fit in a car. true rotary engines (not wankel) like the engine in the legendary Sopwith Camel Biplane was actually used in cars like the Adams-Farwell and some motorcycles integrated into a wheel. though today they have gotten the names "Rotary-Radial" or "Rotating Radial" engines not to be confused with Wankel's.

@obelic71 3 года назад

The Wright Wirlwind Radial in the M4 sherman tank for example.

@Mauro-82 3 года назад

Turboshaft engine (Chrysler Turbine Car, Fiat Turbina who helds the Cx record for decades with 0.14, General Motors Firebird, Howmet TX, Lotus 56 which proved to be fast but unreliable at indianapolis before being banned, Renault Étoile Filante, Rover JET1 but also M1 tank, powerboats and many helicopters

@fishneck7366 2 года назад

You need to do a part two with the unique sounds of each layout!

@DanticBlision 9 месяцев назад

Wait I’m new to this mechanical stuff; THEY ALL HAVE DIFFERENT SOUNDS???

@alliedgollfer1239 8 месяцев назад

@@DanticBlision They do. Though I can't really differentiate between them

@litaf4889 8 месяцев назад

@@DanticBlisionyes. 5 cylinder engines just sound like mini 10 cylinders. So 5 cylinder engines sound more like 10 cylinders than 4 or 6 cylinder engines

@DanticBlision 8 месяцев назад

@@litaf4889 while I appreciate the attempt, this was about as helpful as describing colors to deaf and blind person. Not because it wasn’t a great explanation, I just have no reference for any of that.

@litaf4889 8 месяцев назад

@@DanticBlision understandable. Just look up 10 cylinder car sounds and then look at 5 cylinder sounds like the focus they mentioned in this vide have 5 cylinders, a Volvo C30 also has the same engine. You'll see they sound similar to a 10 cylinder engine

@Jacob-sw7fk 11 месяцев назад

This may be one of the most well researched video y'all ever made. Love it.

@ThePowerofJames 3 года назад

How did Jerry not take the chance to go “they’re long, they’re strong, and they’re down to get the friction on”

@svelob1944 3 года назад

SO FELLAS YEAH FELLAS

@Ben_Jones 3 года назад

I'm glad I wasn't the only one to think of this

@daemonite06 3 года назад

@@Ben_Jones l

@jonnyboyiee4202 3 года назад

I regret to inform you I just liked but had to unlike because it was at 420 and I’m to stoned to ruin it sorry Edit: I’ll like my own reply and you can pretend it’s for you lmao

@rjlopezmr.p2216 3 года назад

@Spherz 3 года назад

So this is basically Turning into science garage, I like it!

@garbagetrash2938 3 года назад

Exactly what I thought! I love it.

@mutten55 3 года назад

Nooo it’s Donut media developing into its Blazing Master Evolution 😤

@artistwithouttalent 3 года назад

Whatever happened to Bart? I know he had a kid and decided to step back, but it feels like he dropped off the face of the Earth.

@MrIronIIoxide 3 года назад

@@artistwithouttalent He has left donut media effective after June 2019

@APEXStigZ 3 года назад

Ayyy look who it is

@WolfeSaber9933 Год назад

There's a unique engine layout that I just love. It's called the deltic. It is basically three V connect to create some opposing piston layouts.

@MarkLoves2Fly 2 года назад

There is also the radial engine, mostly used on aircraft, but also on some really wild motorcycles. 5,6.7.9.10, and even a few more cylinders were available. 1 crank for a full set of pistons, occasionally though rarely they can be found with a twin radial setup. They just sound so cool, when they run! :D

@redouanbouziane4022 3 года назад

Jerry: gives detailed explanation of different engine layouts me: haha engine go suck squeeze bang blow

@TJDST4 3 года назад

The old Sport Compact Car magazine line was Suck, Squish, Bang, Blow...if I remember correctly...it's been a while...

@tungabunga4107 3 года назад

thats what she said

@TheMrTonk 3 года назад

That moment when you realize that he forgot that a radial engine has been in a car

@NickVanRegenmorter 3 года назад

Time for someone to put a rotary engine in a car so Jerry can talk about the cooler of the 2 rotary engines 😂

@robertmyles9124 3 года назад

@@NickVanRegenmorter Well the radial should've been on here regardless because it was "every engine layout explained" not "every car engine layout explained." Also, quite a few people already have put radials in cars, even motorcycles. Also Also, he covered rotary engines; the wankel or "dorito" that was in the rx7 is rotary. Radial engines aren't rotary. So you saying "the cooler of the two rotary engines" is just nonsensically stupid and incorrect.

@D8W2P4 3 года назад

@@robertmyles9124 The WANKel stole the true rotary engine's name.

@KineticTaco 3 года назад

@Joshua Lutz oh my god... yes

@xcergy9482 3 года назад

Radial & the turbine. Both are used in tanks. Also off his engine list is steam and DC motors.

@goatz556 Год назад

Donut media is the ONLY channel where I will actually sit thru the ads and enjoy them. Best yt channel ever made

@thegamingsaiyan637 Год назад

Inline’s are definitely my favorites, jz’s rb’s, the st205’s 3s-gte, all that stuff just sounds amazing

@haxthehax 3 года назад

Last time I was this early, Science Garage was still a thing

@derrickstorm6976 3 года назад

It was great, but this is alright too

@gurkenproduktions2369 3 года назад

What happend to Bart?

@ThatGermanBugeye 3 года назад

Well B2B has kinda turned in to smt more similar to Science-Garage, then what it started out as originaly

@dailydrivenmiata8760 3 года назад

@@gurkenproduktions2369 I believe that Bart had a kid, so he stopped working here and focused on his kid

@suvaang1823 3 года назад

Same lol

@sweno97 3 года назад

How could you not mention "insert favorite engine no one heard of", it revolutionized engines forever.

@ammadejaz93 2 года назад

What's that

@grantflippin7808 Год назад

Radial

@mr_logical8481 Год назад

@ilsmawandfarm1767 Год назад

But...but...the duke engine...it...did a thing...

@endgamerplays Год назад

@@ilsmawandfarm1767 what did it do then?

@user-ey4oc5lh5i 5 месяцев назад

Thanks for this video I learned many things from this video,when I watched this video before I have many questions but after finishing it it all comes to sense.

@unknownbrazilian1734 Год назад

I'm from Brazil, and I've learned a lot of stuff from this channel, even in a foreign language, I've learned more than in Portuguese, thanks a million!

@steeleluedtke398 3 года назад

The fact that he gave more credit to ford and hummer than audi for 5 cylinders is mind boggling.

@itsreverse4237 3 года назад

This ^^^ and Volvo too

@maxant4285 3 года назад

Murica !

@SPDSTA05 3 года назад

And that it was in the Chevy Colorado's as well as the H3... But, I guess he's gotta pick only one and either way, someone would be mad! Haha

@lucasaubin1661 3 года назад

Talking about 5 pots without mentioning the rs3 is a sin

@wiltonater 3 года назад

@@SPDSTA05 yea, I was thinking the Colorado the whole time for I5 but H3 was just a Chevy Colorado with a body kit & blower

@Johnny-ke3qu 3 года назад

No one’s gonna talk about how Jerry put on two different wigs, a dress and a suit for an ad read??

@alexmeighan1540 3 года назад

It was very disturbing to watch...

@AGNDAHOUSE 3 года назад

Yea I totally didn't skip that part.. 🙄

@gusmazura4815 3 года назад

Its Gerry with a g and yes its burnt into my brain now disturbing.

@bobbycone2 3 года назад

He was already doing that. They just decided to film the ad that day.

@romanjanusaitis2055 3 года назад

At this point it’s just normal.

@BMathiesen Год назад

As a guy who loves working on cars, especially Hondas, not super duper experienced but have done some stuff but I never knew there were anything other then straight, V, and rotor engines. This was a very cool video and very informative! I Def learn a decent amount watching you guys.

@orinmillar5097 Год назад

Jerry does such a good job with the ad skits, making them interesting and enjoyable to watch, one of the only people who makes me want to watch sponsorship ads

@ozan1234561 3 года назад

>Talks about inline-5 engines >Doesnt mention audi quattro Cmon, it literally shook the rallying world when it came out

@ultraguy8771 3 года назад

Well, he did mention the RS2 which was in a way, the Quattro's successor.

@A2KLAU 3 года назад

To be fair that engine is a Volvo engine and also found in the Focus ST225, or XR5 in Australia.

@confinedwithin1 3 года назад

Yeah I’m surprised he didn’t mention Volvo at all because the majority of their 90’s and 2000’s cars were 5’s

@djspflytnt 3 года назад

came here to make sure someone was complaining about this

@peari8676 3 года назад

Who would win? An incredible innovative rally monster with hundreds of horsepower and a revolutionary all wheel drive system Or one RWD light boi

@robcarle 3 года назад

V4 engine "not a ton in cars" **Sad Ford V4 Noises**

@argh1989 3 года назад

Even weirder is how he brought up Lancia for the VR4, but mentioned some antique contraption instead of the famous Fulvia.

@raymonroe1983 3 года назад

Chevrolet had them in at least one truck too but not the most notable.

@johnd8892 3 года назад

Also ..The V4 was a mass market motor for Ford, but in Europe and mainly Germany. In the 1962 Ford Taunus then Consul. transit van, and Capri. Later used in the Saab 95,96 and 97 when Saab first moved away from two stroke engines and to the four stroke Ford V4. Possibly at Ford's demonstrated suggestion to sell motors. Was also used in the first Ford Mustang, the mid engined prototype. Was intended for mass sale in the US as the Ford Cardinal with a V4 but Ford eventually went with the Falcon and Cardinal design evolved into the Cortina and Taunus. Sizes from 1.2 to 1.7 litres for all these. UK use in the Ford Corsair and Zephyr mk 4 from the sixties as well as the Transit Van. Lots of Lancias from even the 1920s used a V4. So not just the rare cars shown. Lots of mass market cars. So even the US nearly had lots of Ford V4 Mustangs and Cardinals.

@aaronbarton2179 3 года назад

Jesus Christ car weebs

@maxant4285 3 года назад

And of course ZAZ cars from USSR. How can you forget that.

@unspherdcomb6174 Год назад

I had a 2005 Volvo S60 T5 which came with a Turbo inline 5. Hands down one of my favorite motors in a car I’ve owned.

@erict3728 Год назад

Great video. I learned a lot. I don't think I learned anything particularly useful to me.. But I love to learn new stuff... I'm interested in the opposing piston engines now. I'd love to learn more about them

@rosensteelgarage1307 3 года назад

Jerry: suck squeeze bang blow Mom: what are you watching Me: uhh donut media

@stephen_cs 3 года назад

Don't nut media

@seanmoyer4563 3 года назад

😆

@-m.d.n-9019 3 года назад

@@stephen_cs you deserve *mo powah* for that comment.

@mihailmilev9909 3 года назад

@@stephen_cs lmfao

@mihailmilev9909 3 года назад

@@-m.d.n-9019 yes that was very good

@user-sx4yu3nw4j 3 года назад

Those H engines look like they’d create ungodly vibrations and rattle every bolt on the vehicle loose! 🤯

@brytonmassie 3 года назад

Yeah perhaps if the were opposed when they fired?

@josugambee3701 3 года назад

@@brytonmassie Like two boxers side by side? That would make more sense.

@LFA707 Год назад

Good video amazing knowledge but now I have a headache, just finished studying for my DMV renewal written test and now this too much info for one day. 🤣🤣🤣🤣🤣 Thank you for all your videos you guys put out. I been watching every single one of them and enjoying every single one of them. Thank you!!!!!

@rpgdegree6027 2 года назад

Thank you for the breakdown. I don't know anything about cars and I was able to follow along :)

@camthecanadian5417 3 года назад

“Inline engines are cheaper and easier to maintain” *cries in N54*

@forzaOM11 3 года назад

Ah man, what a fantastic engine though

@mado5436 3 года назад

meanwhile me smiing in M52B25

@Gluteus.Maximus 3 года назад

Cries in VW TSI with a trail of burnt oil behind it

@reilandeubank 3 года назад

i have actually been surprisingly lucky with mine, only a fuel pump and valve cover gasket replacement and i've had it from 88k to 105k miles

@Star_Taro 3 года назад

138k miles strong, no issues (except for a few sensors)

@floristolsma2229 3 года назад

Can we just take a moment to appreciate the incredibly made sponsored segments

@Iosis6 3 года назад

Nope. I skip them every time.

@lorenzogutierrez7488 Год назад

My favorite has gotta be the 5cyl in my GMC Canyon. 280,000 miles and still going strong with no issues so far

@turbochargedtransit7241 2 года назад

Also, an absolute TON of giant V engines made it into locomotives, like the EMD 2 strokes; 567, 645, and 710, which came in 8, 12, 16, and 20 cylinders. GE also made the FDLs and GEVo engines in the same variants.

@evanb3024 3 года назад

People who swear they know about cars: FINALLY THE VIDEO THAT TEACHES ME

@RSpracticalshooting 3 года назад

Yeah I know about cars...... *runs to watch as many donut videos as possible*

@yaboi3248 3 года назад

I knew nothing about cars when I started watching donut and now I've worked on everything from a 1947 Dodge to a 2017 Mustang GT

@colinmccrash4215 3 года назад

They missed duke engines and turbine egines. And I gues There been car witj rockets too.

@marcoandolfatto3832 3 года назад

@@yaboi3248 So you know about American cars. Cool. Only the rest of the world left to go :o)

@robertbelote5273 3 года назад

I know enough to stick to my old f150 and my bikes.

@MarkAllen-xt1wm 3 года назад

"So who's got the inline 5? Focus RS, Hummer H3, RS2" *Sad TTRS noises*

@timothymcquade7033 3 года назад

sad c4 s4 noises

@SpielmannHannes 3 года назад

He mentioned Audi, so we should be happy enough

@szymon522035 3 года назад

sad every volvo B5T engine

@Gias1 3 года назад

Volvo made them for years. 1991 until 2012.

@MarkAllen-xt1wm 3 года назад

@@Gias1 Yeah.... The T5 S60 is my favourite

@mrmurpleqwerty4838 Год назад

The fact that there's over *TWO ENTIRE MINUTES* of video before there's substantial content is _astounding._

@iLLadelph267 9 месяцев назад

4:26 this was a total eye opener, epiphany, realization moment for me as someone wanting to learn the combustion engine realm of engineering. expressing power strokes in that way, x° of delivering or not delivering power during a single rotation and how that relates to several cylinders *in a line* with each other was a total AHA! moment for me! I immediately started to understand inline vs V form factors and what every benefit and trade off meant to the structure and architecture of the engine. thanks for the video guys! 🫶

@iLLadelph267 9 месяцев назад

"suck squeeze bang blow" is a hell of a cycle btw 😂

@bruhnt5063 3 года назад

3:07 but Uncle Jerry? How can a single cylinder engine be an inline?

@TheElectricgamez 3 года назад

good point

@andrea7693 3 года назад

Through a single point can pass infinite straight lines. Euclidean Geometry, page 1, chapter one.

@AidanBenny 3 года назад

because if you look at the front of it it's in the shape of a letter I

@Carlos-ln1lx 3 года назад

@@andrea7693 you are technically correct, but also wildly incorrect😂

@andrea7693 3 года назад

@@Carlos-ln1lx if you (he) ask stupid questions you get stupid answers 😄

@nehemiasartiaga5919 3 года назад

Donut ads are the only ones I don't skip.

@darrenswails 3 года назад

Jeremiah in a dress, dating himself was pretty creepy 😂

@ethanjohnson8958 Год назад

My dad had a ‘98 Volvo 850 turbo that he got right before I started driving. We got another car from a family member after that, and he ended up selling it for super cheap to someone else. I miss that car a lot actually. It was super low to the ground and had an in-line five (and a turbo) and it was so fun.

@sofyankarim Год назад

Your video is gold! Thank you and great work

@fabiocarreira1697 3 года назад

The animations are gloriously smooth

@iwantsexseemyvideo7149 3 года назад

Muffin

@JohnnyWishbone85 3 года назад

As a Subaru owner, I've gotten really good at pulling my car's engine, because it's the easiest way to maintain it. Spark plugs, valve adjustment, and head gaskets, and timing belt, all in one go. It ain't cheap, but I can get all that done in less time and with less effort than it would take to do just the adjustment and the spark plugs. Actually, in the long term, it's cheaper than putting off vital maintenance, but it's a hell of a lot of money all at once. :P

@ashleyo413 Год назад

Would love to see a video on it

@alanhilder1883 Год назад

I know that it is a boxer engine but I just tell people that it is a lazy V4, it's so lazy that it couldn't hold up the V and went flat... I actually say my ( slightly muffled AWD ( so they think I said 4WD ) is a lazy V4 but has a turbo to help. Some click, some get confused, some go on about not being like a V4 at all.

@juanruizalonso5294 Год назад

Fantastic video man, congratulations!!!

@nicholasfranklin2119 2 года назад

Donut media should write a book, I would buy it

@colindavis2166 3 года назад

Ok I'm not the only person that laughed at "suck, squeeze, bang, blow" Good1

@Rob-fc9wg 3 года назад

That's saying has been around since the four-stroke engine was invented.

@bonzeitheprotogen 3 года назад

I chuckled at it

@greenarrow3756 3 года назад

@@Rob-fc9wg four-stroke is a funny word

@Rob-fc9wg 3 года назад

@@greenarrow3756 Why?

@greenarrow3756 3 года назад

@@Rob-fc9wg "four-stroke"

@andredepaulagomes 3 года назад

I missed the radial engines, there's a modded VW beetle with one of those. Also the duke engines, they look cool

@tony_5156 3 года назад

That’s not a car engine

@dave_xc 3 года назад

Yup

@dave_xc 3 года назад

@@tony_5156 who cares

@tony_5156 3 года назад

@@dave_xc its a plane engine from like 1920 it’s not related to cars or the automotive industry.

@lucasswearingen377 3 года назад

@@tony_5156 there were some cars that used radial engines

@T--xo2uq 2 года назад

This was great inspiration for my next piston engine in Scrap Mechanic.

@FishSnackems 2 года назад

Keep us posted :)

@Evan-rq2ee Год назад

im watching this at 14yrs old and i love cars, they are just sooo interesting to learn about, the W16 engine is insane, 4 cams? thats crazy. imagine the gas mileage on that 😂but, great video, just found your guys channel and ive been watching it all day😂

@WRMonger1 3 года назад

I’m an FAA licensed aircraft mechanic and I have been schooled.... thank you. 👍

@cimarronperformancewerks6611 2 года назад

Dude, it’s a Certificate. Not a license. And you should have pointed out that there are engines with integral heads. I am also aware that I am annoying. All good. A&P brotherhood. 👊

@bencs5488 3 года назад

If you want to say "Reihenmotor", saying "Ryan-motor" does the job.

@fabianfrick364 3 года назад

As a german i can confirm that this is totally right.

@EddyEssArt 2 года назад

Accurate

@DarthPingu07 2 года назад

As a Ryan I can confirm

@mrdesmit6038 2 года назад

As a motor i can confirm that

@ryanwelker6765 2 года назад

Hey

@Akimori91 Год назад

Thanks for the information. Have been wondering on how the calculation works on cylinder cycles.

@audreyclaybaugh4520 4 месяца назад

Currently talking to a car guy and I know nothing about cars so this has helped immensely 🙏🏻

@Nevarnost 2 года назад

Well, it would be awesome to see some other video about "strange" engine displacements like Duke, Radial, V5, Chrysler Turbine, Honda NR750 oval cylinders and more (even if they are not commonly used in cars)

@jamesbradley2468 2 года назад

The Helicron was technically a car...

@someweeb3650 3 года назад

"Now let's get into why you would want an inline 5" - They are the best sounding engines ever conceived by mankind.

@SquigglesZero 3 года назад

I have an H3 and I approve this message.

@kookieslayer 3 года назад

V10 would like a word. (I honestly can't decided if I prefer V5's or v10's, they both sound so darn good)

@ccbishop 3 года назад

@@kookieslayer Audi's newest I5 is literally half of the R8/Hurrican V10, so in a way... both of you are right?

@someweeb3650 3 года назад

@@kookieslayer I think i5's sound better, V10's are too smooth and predictable. i5's have that roughness to them. Even with that said I find the newer muffled Audi i5's too smooth.

@Dubz0408 3 года назад

@@kookieslayer If you can spin a an I5 fast enough it will sound exactly like a V10 because theyre on the same frequency. Check it out! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--Pz4dYuQK_c.html

@TusharBedi 2 дня назад

This is one of my favourite channels. The way you simplify stuff is brilliant. Much love from India 🇮🇳

@Absalonrascon 2 месяца назад

I don’t know anything about classic cars. But in this video I’ve learned a lot of things. Great channel and interesting animations and pictures.

@faraazshaikh1834 3 года назад

Why is no one talking about the piston base going through the crankshaft

@yungmilk8858 3 года назад

I was wondering the same thing

@bostoniangamer5772 3 года назад

probably because animation is hard enough

@TJ.85 3 года назад

It's driving me nuts and I'm sitting here trying to figure out how this is supposed to look in real life and how they could have shown it.... It's hurting my brain seeing this over and over!

@notoriousls5513 3 года назад

Dude it was so distracting lol.

@festiveyetionyx1112 3 года назад

@@TJ.85 SAME

@youngstunna1594 3 года назад

“One of those big ass mining trucks “ n I’m just like damn he said that with his chest😂😂

@David-nl3il 3 года назад

ayyo no cap, I had to replay that back, I was so surprised it wasn't bleeped haha

@iwantsexseemyvideo7149 3 года назад

Cookbook

@donfronterhouse4759 Год назад

I didn't know about several of these engine layouts. I like to learn new stuff. Cool.

@arvindsai18 2 года назад

Best of donut media!!! Love you guys.. please do this, I really wanted to work on cars on a garage. But then my parents wanted me to be a doc.. so work till 40 as doc and then I'll work in a garage

@zacharycrowell9454 3 года назад

Aren’t “Divorced Dad’s” and “Stepmom’s” house the same place?

@zealot1210 3 года назад

Depends on why they split. Something about your mom liking the carpet at your stepmom's. Idk, I wasn't really paying attention.

@coby_e 3 года назад

I thought I was bugging 😂

@lostmyhead8220 3 года назад

Lesbian mom

@tylercalender1619 3 года назад

not if your moms gay

@OriginalKingRichTv 3 года назад

@NorthSoundGaming that’s gay

@foolwithatool2052 3 года назад

17:45 there are extremely rare x engines. Also I've never heard of it in a car, but radial engines should be on the list.

@joshuapritchard575 2 года назад

@Caleb Marcoux radial??

@joshuapritchard575 2 года назад

@Caleb Marcoux right that makes a lot of sense

@myrealusername2193 2 года назад

Also never in a production car (as far as I know) is the first type of rotary engine, which is basically a radial engine where the engine spins inside of its case. They were used in airplanes in WW1

@jagoslw 2 года назад

well, all plane prior to jet age uses either radial engine or V-engines (usually V-12), where radial engine usually goes more than 14 cylinders, crazy radial engine such as the Wasp Major with 28 cylinders outputs >3000HP. Some radial engine are used in tanks such as the M4 Sherman cuz it provides mo' Powah and standardized production, but other than that, there are practically none Radial engine car because of the size of it and should not be in this show, otherwise there are tons of other engines to talk too

@-NGC-6302- 2 года назад

I have seen a really weird design for a circular engine. The ‘piston’ rotated around the crankshaft to turn it and I forget how they managed to get compression behind it.

@JimmyS.25 2 года назад

Never seen a vid of you guys but I am definitely staying 'round.

@chronalexander8893 Год назад

Awesome content as always guys 👍

@BigBenlolz 3 года назад

"America never got it so whatever" explains this whole channel

@jaaman5131 3 года назад

What do you mean

@stevewanke7761 3 года назад

that and the 1973 oil crisis...

@giovantheunissen7234 3 года назад

@@user78382 god damn oil crisis ruined everything

@aliabdallah102 3 года назад

@@giovantheunissen7234 I don't want to get political but y'all brought it on yourselves.

@hifiteen49 3 года назад

I am kinda mad that they didn't mention the RALLY CHAMPION OF ALL TIME AUDI SPORT QUATTRO S1 with 5 cylinders.

@JohnnyWishbone85 3 года назад

14:18 -- I like how you glossed over an engine that was so ludicrously dominant that it single-handedly destroyed an entire racing league.

@exsappermadman25055 2 года назад

"This one goes to sixteen".....

@soj_afk 7 месяцев назад

I love your content !!! I'm definitely subscribing!!!

@neelmaniyadav7216 Месяц назад

It is one of the better-explaining videos from Donut. As a beginner, I think it didn't have a lot of quippy jokes like a lot of their explanation videos and it also had a sufficient amount of pictures and examples, which made it easier for me to understand everything in the video.

@StuntcatTV 3 года назад

Brother is talking about an Audi with an inline five engine and goes straight for the RS2 Avant. Me pouting in Quattro.

@harleck9119 2 года назад

The Audi Quattro alongside with the Volvo 850 T-5R are two of the most representative cars for inline-5, I don't know why they didn't mention them😔

@jordaneggerman4734 3 года назад

Can you imagine the utter dread of having 36 apex seals, all spinning in one engine bay?

@argh1989 3 года назад

At that point, can we just go ahead and call it the engine tube?

@doomkid02 2 года назад

Gotta show love for the inline 7MGTE

@kresimirmilisa5560 2 года назад

very nice explained jeremiah about engine configurations.

@galahad8307 3 года назад

Unpopular opinion: Jeremiah is actually tied as my favorite host in Donut

@imagingteam 3 года назад

Not unpopular at all.

@taymorrison 3 года назад

facts and that’s tied w jobe for me lol

@xxjang6876 3 года назад

He grows on ya

@ryanburns2311 3 года назад

Zack is tied with Nolan for my favorite

@wasifzihan4662 3 года назад

true

@igors_lv 3 года назад

Airplanes had cool piston engines with like 9 cylinders in a circle around central propeller shaft - radial

@ol_smokey9370 3 года назад

Wright 4360. 4, 9 cylinder radials in a row for 36 cylinders with 72 spark plugs 😆

@RobertSmith-pp9oe Год назад

This is gold.

@taylorgalilea698 Год назад

My 07 VW Rabbit had an inline 5 and it really loved it

@archiescriven6178 3 года назад

I can imagine the guy doing the animations taking one look at the Napier Deltic and saying "F**k that, just mention it."

@AlexOnTheBus 3 года назад

Maybe they figured that, if they went any further on the Deltic, the comments would have been swamped by British railfans.

@rhazien2502 3 года назад

Isn't that the same as the opposing piston delta configuration.

@keithlarsen8423 3 года назад

the Emil 1, a swedish heavy tank had a flat 12 in it

@alshaver3742 Год назад

As always, excellent information and entertainment from Donut. Simple animations were extremely helpful to illustrate your descriptions. A small clarification: All boxers are flat, but not all flat engines are boxers. With the popular Porsche and Subaru boxer powerplants, adjoining cylinders move in opposite directions per your animation. There are, however, flat engines in which adjoining connecting rods share the same crankshaft journal. In these engines, both pistons move right, then both move left. Therefore, their inertia does not cancel out. These engines do not have the inherent balance of a boxer. For example, Ferrari made a 180 degree v-twelve. That's right, a 180 degree Vee. That's another way of saying flat, but adjoining connecting rods share a journal, so it's not a boxer.

@kurtv6281 Год назад

Excellent research for this video.

@zacharydumas188 3 года назад

"Next we go to V4, a Moto GP staple" Proceeds to show 2 Yamaha bikes that use inline 4s...

@biswaskumar484 3 года назад

I see you're a man of culture as well

@MrPajbanan 3 года назад

RIP Saab v4

@dariopiovani5077 3 года назад

Sad Fulvia noises. Also Ford Taunus (yes, Taunus, not Taurus - it's a European Ford car).

@judeamogabe8306 3 года назад

@@dariopiovani5077 T-anus? Oh wait....

@dariopiovani5077 3 года назад

@@judeamogabe8306 LMAOOOO blame Ford, that name definitely didn't age well XD

@thatwhitesixty8247 3 года назад

"hot exhaust doesn't belong next to cold intake air" *Jeep 4.0 has entered the chat*

@Righandwelder1202 3 года назад

😂😂 that’s exactly what I said!! I was like... ummm my jeeps says otherwise

@frantickoala994 3 года назад

Although the exhaust manifold is made out of steel, so the metal does retain heat and the intake manifold is made out of aluminum which does a great job at keeping heat away.

@Righandwelder1202 3 года назад

@@frantickoala994 correct .. aluminum dissipates heat like 20 times faster than steel or stainless steel would

@salami99 3 года назад

Thats why the exhaust and air intake are on the same side

@j.d.saccociates3313 3 года назад

Ah yes the 4L with 170 screamin horse power!

@KentuckyRanger 7 месяцев назад

@ 13:11 I have a 2015 Subaru Outback 3.6. I just spent the entire day yesterday, changing 6 spark plugs. I had to take out the entire intake system, as well as the battery, and the battery tray, just to get to the heads. Thank God! They're Iridium, and only need replacing every 100k miles. Another negative, a set of six cost me $100...

@RayDesmond587 2 года назад

Engines are my new hobby. I understand in comment section there will always be more knowledge. However, thanks for the content so I have starting point. Please keep up content to technicality of cars!!!!! Thanks

@NikAlvarezOfficial 3 года назад

the piston connecting rods clip through the crank in every animation and I can't unsee it

@11114jll 3 года назад

Thought I was alone thanks

@justbuggin67 3 года назад

There are inline 6s that are smooth and strong. Now on to 8s Slant 6: Do I mean nothing to you?

@jjjones537jj 3 года назад

Slant six is just an inline six

@cpufreak101 3 года назад

If I remember right, isn't a slant 6 just an I6 designed at a slight angle?

@justbuggin67 3 года назад

Yes, but he showcased every single other engines example BUT the inline 6.

@cpufreak101 3 года назад

@@justbuggin67 5:43 it's right here tho?

@justbuggin67 3 года назад

@@cpufreak101 sorry I should clarify, he mentioned multiple examples for all other types but missed the most glaring and popular inline 6, the slant. He just glossed over the 6ers