Тёмный

Every F30 NEEDS These Mods 

Fritz Ramos
Подписаться 47 тыс.
Просмотров 46 тыс.
50% 1

The charge pipe is arguably the first mod you should do for your F30 and while you're there you might as well do the intercooler. See how to do it on your BMW in under an hour.
Intercooler: tinyurl.com/n55VRInt
Charge Pipe: tinyurl.com/n20chargepipe
Boost Pipe: ebay.us/LNSxaT
Intake Valve Cleaner: amzn.to/2LG29zX
Mass Air Flow Sensor Cleaner: amzn.to/31IYGGn
Drill: amzn.to/3poC8IW
Bits: amzn.to/3taB3We
Creeper: amzn.to/2V8aHTe
Allen Wrenches: amzn.to/3hp4P47
Ratchets: amzn.to/3pkohDh
Thanks for tuning in. If you are looking for a complete tool kit as well as video gear hit the links below.
Tool Kit: kit.co/fritzramos/bmw-mechani...
Video Gear: kit.co/fritzramos/filming-gear
If you are looking to get started on RU-vid, consider Tube buddy as it has helped me out a great deal. Try it out for free: www.tubebuddy.com/financialfi...
Some of the above links are affiliate links. By using them you help support the channel at no additional cost to you. Thank you for your support.
00:00 Intro
00:35 Why These Mods are Important
02:54 Chargepipe Uninstallation
04:07 Intercooler Uninstallation
04:39 Intercooler Comparison
05:08 Intercooler Install
05:43 Chargepipe prep
08:09 Chargepipe Install
09:15 Initial Impressions and Tips

Авто/Мото

Опубликовано:

 

24 июн 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 48   
@noelelnolo9642
@noelelnolo9642 Год назад
Fritz, your videos r excellent. Top jotch! Thank u!
@argonovak3444
@argonovak3444 Год назад
Great video
@jimmyn2054
@jimmyn2054 2 года назад
I have the exact same set up , can you make a video on the VRSF Muffler with the diffuser like a 335i? Luv your vids!!
@thomasdiersch1181
@thomasdiersch1181 2 года назад
Nice upgrade. I'm thinking of getting a new charge pipe for my M235. Mine is still stock
@FritzRamos
@FritzRamos 2 года назад
Thank you and yes! You definitely should.
@jimmyv1289
@jimmyv1289 Год назад
Hey fritz any chance you would know the part number for the 2 new gaskets you installed can't find them anywhere! Thank you!!!
@davidcollison8490
@davidcollison8490 Год назад
Have got a link for your jack you used please.
@wasing02
@wasing02 6 месяцев назад
Do you know if changing out the charge pipe and intercooler will trigger a check engine light?
@Durikono
@Durikono 5 месяцев назад
Does the BMW shows his MIL because he has a bigger Intercooler? (More volume) I want to upgrade some parts, so that I can get a long time with it. BUT the ECU will be stock! And did the car need “longer” (like a turbo leg)
@Mr2004audi
@Mr2004audi Год назад
What jackstands are you using there? They look awesome! And which jack is that?
@FritzRamos
@FritzRamos Год назад
Jack: amzn.to/3r5Sp6n Jack Stands: amzn.to/3r33i94
@Skintback27
@Skintback27 2 месяца назад
I couldnt choose so i went FBO all at once all with a paper tag still lol
@RangeVibeZ
@RangeVibeZ Год назад
Will this work on a 2013 528i x drive n20 f10
@kaichow6931
@kaichow6931 2 года назад
CAn N20 IC fit into N13 without any modification ?
@MR.ROBOT...76
@MR.ROBOT...76 Год назад
Man I can't wait to get my first bmw... 335i that is
@robertconklin502
@robertconklin502 2 года назад
Awesome video! Do you have to get a tune after this install? I'm actually doing this, Injen intake, catless downpipe, new boost pipe n inlet pipe upgrades as well as with a muffler delete. Will it hurt the car to drive like this until I get a stage 2 tune?
@FritzRamos
@FritzRamos 2 года назад
No, I ran the m235i like that for a while. Here's my review on it ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-LZf8UuszVGY.html Hope that helps
@robertconklin502
@robertconklin502 2 года назад
@@FritzRamos thanks!
@chasegoodman7672
@chasegoodman7672 2 года назад
3rd upgrade should be to get BimmerLink & BimmerCode as well as a BT OBD2 dongle. 4th upgrade... MST Cold Air Intake because of the heat shield and MAN DOES IT SOUND SEXY
@chasegoodman7672
@chasegoodman7672 2 года назад
Also, the charge pipe should 100% be the first upgrade. Mine exploded on the way to Taco Bell one evening
@FritzRamos
@FritzRamos 2 года назад
Darn Taco Bell. I Scrapped my rim leaving their drive though lol. Tha one's on me though.
@FritzRamos
@FritzRamos 2 года назад
Good points! I might have to sneak 1 or 2 more items in front of your list though.
@chasegoodman7672
@chasegoodman7672 2 года назад
@@FritzRamos What would you sneak ahead? Just curious if it is something I have not done yet I have all hot and cold piping changed. I still need to do the VRSF FMIC tho :/
@FritzRamos
@FritzRamos 2 года назад
@@chasegoodman7672 Mickey Mouse Flange and Turbo inlet. Videos incoming
@Sqwin_n20
@Sqwin_n20 2 года назад
Just a heads up, the stock clutch can’t hold stage 2 OTS maps. Ask me how I found out the hard way. Good luck and have fun fritz.
@FritzRamos
@FritzRamos 2 года назад
Thanks for sharing! I'm sorry to hear that. It's a good thing that this car won't get a tune 😅
@dylan-nguyen
@dylan-nguyen 2 года назад
The stock pistons can’t hold stage 2 either I had to get an engine rebuild at 90k and am now running a stage 1 jb4 tune
@Sqwin_n20
@Sqwin_n20 2 года назад
@@dylan-nguyen that’s why you don’t run JB4 a piggy back. Stock internals are fine. Piggybacks have a margin of error as well.
@dylan-nguyen
@dylan-nguyen 2 года назад
@@Sqwin_n20 stage 2 was a bm3 and I didn't wanna pay for it again for a stage 1 so I got a used jb4 from someone at work
@Sqwin_n20
@Sqwin_n20 2 года назад
@@dylan-nguyen bootmod did nothing to your car lol. Not sure why you had to get a new tuning platform and go JB4 if your motor was rebuilt + used the same DME for licensing. It would still be tired to the same car/DME. Sounds like someone is spreading BS.
@D1beam
@D1beam 2 года назад
I did vrsf down pipe but now I’m trying to get a tune to remove my chrck Engie light since the 02 checks it
@FritzRamos
@FritzRamos Год назад
If you plan on getting BM3 you can code it out with their app
@87mitchb
@87mitchb 2 года назад
Im trying to decide between an f30 320i or an Audi A4? The f30s i have looked at are quite worn like cracks in the headlights and window and door surrounds.. and they only done around 60k miles. Is the A4 i higher quality build? How about reliability?
@dylan-nguyen
@dylan-nguyen 2 года назад
From personal experience the 4cyl bmw engines have a huge flaw. Timing chain guides fail ~100k there was a class action lawsuit A4 on the other hand has loads of electrical issues sensors failing all the time. Coworker has one and like every other month has to bring it in for a broken sensor I personally will only get cylinder bmws as they’re all pretty reliable As for the interior, mine looks brand new with only the interior door handle guard cracking which is common. Whatever rubber they used deteriorates and they’ve changed the material in my new car. But that’s a 1-2hr fix (all 4 doors) and diy with just hand tools + drill I don’t know about Audi interior but the build quality is way worse lots of “bling” to look nice but cheap materials and worse fitment
@nordin2131
@nordin2131 Месяц назад
800hp🤔👍👍👍 i need that👍🙏👏👏👏
@AdrianJayeOnline
@AdrianJayeOnline 11 месяцев назад
@0.28 DUDE is that a block of "blow" ?
@uTAPOUT1
@uTAPOUT1 Год назад
I have a b47 what similar components could I change for longevity
@FreedomforAfricans
@FreedomforAfricans 7 месяцев назад
Found anything for the b47?
@realsaxual2357
@realsaxual2357 5 месяцев назад
Is lifting it on hockey pucks not sketchy????????? Idk how I feel bout that
@FritzRamos
@FritzRamos 5 месяцев назад
The rubber is just as sting as any of the rubber pads for jack stands. Just don't get the "training" hockey pucks. They're a softer rubber and compress much easier
@johnpena1758
@johnpena1758 2 года назад
I did the same thing wen I got my n26 but I wen to do my smog they wouldn’t pass me cause of the pips are not oem tho
@FritzRamos
@FritzRamos 2 года назад
So it just failed the visual? My smog location didn't even look under the hood.
@johnpena1758
@johnpena1758 2 года назад
@@FritzRamos yeah just the visual people here in El Cerrito do extra lol
@philpham2069
@philpham2069 2 года назад
The B48 doesn't have intercooler, only charge pipe 😓
Далее
Secrets to Keep Your BMW Running...FOREVER!
10:53
Просмотров 42 тыс.
BEST Intake for the F30 BMW
11:12
Просмотров 19 тыс.
24 часа Я МИСТЕР БИСТ челлендж
1:12:42
10 Terrible Mods I Regret Doing...
15:53
Просмотров 48 тыс.
UPGRADE your F30 Turbo Inlet with MST
6:46
Просмотров 18 тыс.
Easy BMW Mods ANYONE Can Do!
14:13
Просмотров 115 тыс.
Installation Active Sound-System MAXHAUST /// BMW F30
21:14
BUILDING A BMW 328i F30 IN 20 MINUTES!
22:13
Просмотров 92 тыс.
JB4 vs BOOTMOD3
14:41
Просмотров 104 тыс.
Когда купил машину 300+ л/с 🤔😂
0:59
Husqvarna Toy&Husqvarna LC 140 SP@vigosworld
0:14
Обзор на ваз 2108
0:33
Просмотров 2,4 млн