Тёмный

Everyone HATED These on my 996 Turbo, Finally Fixing Them! 

Matt Ross
Подписаться 77 тыс.
Просмотров 72 тыс.
50% 1

The reason everyone HATES Porsche 996s.....especially on my car! Can they be fixed, repaired, or replaced with good results? The 911 Turbo build continues!
Merch - www.boostedapexdesigns.com every $5 gets you entered to win a new Milwaukee 3/8 high speed impact kit. (giveaway ends 4/30/23)
Instagram - / matt13ross
Patreon - / boostedapex (early access to videos!)
Channel Perks: / @matt13ross
Sound/Music for videos: share.epidemicsound.com/dge6e8
5" Drill Sanding Kit: amzn.to/44ihvBd
2" Drill Sanding Kit: amzn.to/3LvXuiV
Auto One HID Bulbs: www.autooneled.com/?ref=Matt1... (discount code: ROSS)
Porsche Upgrades / Parts: Site contains affiliate links for which I may be compensated
Pioneer Amp: amzn.to/3MBAyQi ebay.us/a6Y5Em
Amp Wiring Kit: amzn.to/3zPr4t4 ebay.us/cXsxdz
Interior LED Kit: amzn.to/3nnZWhX ebay.us/mNZbJp
Sun Visor Covers: amzn.to/3no04Ot
HPS 5.0 Brake Pads: amzn.to/41PhG5N amzn.to/3EOfiSy
IPD Comp Plenum: amzn.to/3m1pWyM ebay.us/3thcOg
74mm Throttle Body: amzn.to/3m0HGuw ebay.us/T8VmrF
Atoto Wireless Carplay Stereo: amzn.to/3EtocoE ebay.us/POSyP8
Stereo Wiring harness: amzn.to/3RxeR4l
Dash kit: amzn.to/3HzTJ8S
Alcantara Shift Boot: ebay.us/mLjsAB
LED Signal Relay: amzn.to/3EYun4t
License Plate LEDs: amzn.to/3V1fYdj
ABS Plastic Sheets: amzn.to/3UYpCNw
Fog Light LEDs: amzn.to/3E8AMbN
Turn Signal LEDs: amzn.to/3O8YMA0
High Temp Vacuum Hose Kit: amzn.to/3MHnpDi
Fuel Injection Hose Clamps: amzn.to/3CN9Bmp
Radium Fuel Pump Kit: amzn.to/3MiRRUb ebay.us/uZAFOj
Common Tools I use:
Milwaukee 3/8" High Speed Ratchet: amzn.to/3zo9NqC ebay.us/KR0raE
Milwaukee 3/8" Impact: amzn.to/3GaiYyT ebay.us/DhzBdX
Milwaukee Right Angle Grinder: amzn.to/3BwUgFj ebay.us/bRXqAz
Tekton Swivel Ratchets: amzn.to/3uLXdNs ebay.us/3MHh5k
Retractable Pressure Washer: amzn.to/3EgZmH1
Quick Jacks: amzn.to/36gkqBc
Garage Upgrades:
Noco Genius Battery Tender: amzn.to/3zOCoFY ebay.us/lZJCxy
Battery Tender Wiring Harness: amzn.to/3UncTVL ebay.us/276IRz
Extension Cord Reel: amzn.to/3o4SyZ3
LED Ceiling Lights (set of 6): amzn.to/36m00GP
LED Cabinet Lights (set of 3): amzn.to/3irLWhg
Wall Cabinets: amzn.to/2TwigqJ
Wall Mount Power Tool Rack: amzn.to/3dNLHvc
Retractable Air Hose Reel: amzn.to/3D6tZyh
Other Tools / Gear I use:
5" Drill Sanding Kit: amzn.to/44ihvBd
2" Drill Sanding Kit: amzn.to/3LvXuiV
12" Sawzall blades: amzn.to/3iYnlVq
Eraser Wheel: amzn.to/3BvtxcH
Husky Toolbox (white/black): amzn.to/3VcUrj2 ebay.us/oYNmGv
S.W.A.G Band Saw Table: amzn.to/3ku3Mkh ebay.us/NiEypw
Hanging Extension Cord Reel: amzn.to/2RebLXQ ebay.us/8Yv1X3
Universal Step Drill Bit Set: amzn.to/3ag12TJ ebay.us/4IjhVr
Magnetic Vice Jaw Inserts: amzn.to/2ZmUXPs
Camera Gear:
Canon 250D SL3: amzn.to/2L477Jm ebay.us/vdqXH0
Sigma 18-35MM lens: amzn.to/3cSM1uY ebay.us/pjLbAT
DJI Ronin Gimbal: amzn.to/3zwyJff ebay.us/ppnxfj

Авто/Мото

Опубликовано:

 

25 апр 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 484   
@ShaneConanttheoriginal
@ShaneConanttheoriginal Год назад
Do you perhaps want to put a clear coat over the headlights to further protect them from UV exposure?
@davidrinaldis2351
@davidrinaldis2351 Год назад
2K clear is the only way!!
@MistaaFrosty
@MistaaFrosty Год назад
@@davidrinaldis2351 yeaaaaup.
@luminox1
@luminox1 Год назад
I was about to say lol, wouldn't want to undo all that work after some exposure to the sun. I don't think a simple nano coat would cut it either
@doclobster
@doclobster Год назад
Mcguiar's makes a uv resistant product that you just rub on one per year that works pretty good - or you'll be polishing again in 6 months. Looks great though.
@yellowcolorado25
@yellowcolorado25 Год назад
Make sure you get the 2k clear for headlights.
@haroldwhite7464
@haroldwhite7464 Год назад
Matt please either 2K clear the headlights or PPF them please to ensure they won’t yellow prematurely. Great work
@nickherbin8094
@nickherbin8094 Год назад
ppf is definitely the way to go on headlights.
@integrars100
@integrars100 Год назад
Ceramic coating will work fine too
@pieterverboven4853
@pieterverboven4853 Год назад
Avalon King ceramic coat is cheap and extremely easy to use as well. Applause Matt for sanding and polishing the head and tail lights.
@boogieman065
@boogieman065 Год назад
Looks great. Definitely do PPF, I did the same thing as you then PPF'd, still looks new after 4 years.
@RadDougall
@RadDougall Год назад
You'll have to keep reapplying ceramic.... 2k clear for me all the way. Done properly and will lock in all your hard work. Ask me how I know!
@cheapcargarage
@cheapcargarage Год назад
Hey Matt, If you don’t clear coat those lights they’ll yellow within a year. I’ve done this process several times. The last time I clear coated them and they seem to be holding up better. The car is looking fantastic! It gets so much better every video.
@massiveimprovement
@massiveimprovement Год назад
Great job man! The OEM taillight look so much better now. If you're ever doing sanding of plastic in the future. You can save yourself a lot of mess by just using water as a lubricant. Dip the sanding paper often in the water (rinse and clean). Use just a smal drop of dish soap in the water to releave some the surface tension. When polishing (not compound) plastic with DA/rotary, use a softer pad. For compounding red (harder) pad is fine. Less product also give you less sling. Clean the pad regulary with compressed air, to remove plastic particles buildup in the pad. You're doing this car so much good things. Getting this up to shape is truly a masterpiece. Thanks for sharing.
@matt13ross
@matt13ross Год назад
Thanks!
@dannytodisco3350
@dannytodisco3350 Год назад
Wow, can’t wait for the 10 minute build video and all the before and after shots. Congratulations man, looks amazing
@jrf607
@jrf607 Год назад
Been waiting for this one! This is gonna make it look 10x better!
@alexturcios1583
@alexturcios1583 Год назад
Great stuff Matt, keep it coming. We appreciate the hard work that goes into this. Your car shows all the love it’s gotten.
@crsandelli
@crsandelli Год назад
Previous owner of my 997.1 put black taillights on. Best day ever was when I nabbed a pair of OEM tails and installed them.
@I.LikeCars
@I.LikeCars Год назад
Of course you found something held together by JB Weld 😂. This car is something else. Great work!
@robertjenkinson3360
@robertjenkinson3360 Год назад
YEEEEEEEEEEEEEEEEESSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS!!!!!!!!!!!! Thank you for pandering to us and sorting those tail lights. I love it.
@denisfitzgerald3474
@denisfitzgerald3474 Год назад
What an incredible transformation you’ve made on this 996! From very tired to looking pristine! Awesome job Matt!👍
@matt13ross
@matt13ross Год назад
Thank you!
@keithvolner930
@keithvolner930 Год назад
Second that!
@jj481012
@jj481012 Год назад
Silver or lighter color wheels? I think they would go well with the yellow paint.
@violinmiata
@violinmiata Год назад
Love the clean stock headlights, it’s a classic design that looks better with time.
@Euphorica
@Euphorica Год назад
💯 they looks great
@GodFatherGR7
@GodFatherGR7 Год назад
Nice job man..Just put 2k clear coat on those headlights or a paint protection film (ppf) and you won't be bothered polishing them for a long time...I learnt it the hard way and i was polishing my headlights every year and they weren't so easy to remove.
@michaelhon6168
@michaelhon6168 Год назад
Hello Matt. Yellow and black look great together, but as you now moving to the more standard OEM look I really think the yellow monster will now look much better with a silver set of wheels and nice silver oval exhaust tips.
@matt13ross
@matt13ross Год назад
I agree
@713vinh
@713vinh Год назад
Whaat?? More check engine lights? We better get that sorted. Great job on the lights, looks incredible!
@elduderino1809
@elduderino1809 Год назад
I hear the previous owner wants his car back. Seriously, outstanding car, work and videos.
@matt13ross
@matt13ross Год назад
No way I'd give it back to him! lol
@comedian376
@comedian376 Год назад
Enjoy and good on you for just polishing the factory lights out and not going with some of the hideous aftermarket options. Had to do the same to my Turbo’s lights after 200k miles a while back
@carlosedu9224
@carlosedu9224 Год назад
YESSSSS it’s looking so much better now thanks for your work and dedication Matt
@anthonypierro5296
@anthonypierro5296 Год назад
Car looks great. Enjoying watching your progress. BTW new hid bulbs and ballast did the trick on my dimming E46. Just bulbs helped but the ballasts were the key.
@joshrandall8364
@joshrandall8364 Год назад
Car looks amazing! Clear Lamin-X helps protect your headlights from UV and rock chips! Highly recommend it. We used it on a brand new 2014 car, and nearly 10 years later the headlights still look brand new because we did this.
@bmc5108
@bmc5108 Год назад
I just put them on my 968. Looks great. Protection against road rock damage as well. The material for front lights is thicker than for body panels.
@stevengetz9065
@stevengetz9065 Год назад
Heres a secret way to hold the light fixtures while sanding and polishing: leave them installed on the car and mask around them
@matt13ross
@matt13ross Год назад
Only if the lights weren't so easy to remove. I'd rather not sling that stuff all over the car.
@Engineerboy100
@Engineerboy100 Год назад
KILLED it again Matt. Good job man :) keep up the good work. I'm gonna kick in pretty soon and start pumping out some more videos too, really been having a hard time getting over my Dad passing off and on ... but I feel a cluster of videos coming on lol
@matt13ross
@matt13ross Год назад
Thanks Clint! Sorry about your dad! :( Bring back the videos!
@aaronf4201
@aaronf4201 Год назад
Such a well edited and satisfying vid, thanks Matt! I love it.
@matt13ross
@matt13ross Год назад
Thanks!
@mattbuckley392
@mattbuckley392 Год назад
Excellent stuff .... a great journey to watch indeed. Hats off from England.
@tylersanders6080
@tylersanders6080 Год назад
To save you from working on the floor and making a mess, you should place a cardboard box on your workbench. That way you contain all the cleaner slinging around! And maybe place the lights on soft foam to keep it from moving. Another great video!!👍🏻
@matt13ross
@matt13ross Год назад
Solid idea.
@nathan_lbz9806
@nathan_lbz9806 Год назад
Matt, don't know if you have a welding table, they have a cheap but good foldable one at harbor freight. For things that are awkward to hold while working on, I'll put the item on the welding table, then run a ratchet strap through the table and snug the item down to the table to hold it in place. Just a method I thought you might be able to steal.
@matt13ross
@matt13ross Год назад
I do have one, it's just filled with crap. Sigh, need more space!
@AdamDUrso
@AdamDUrso Год назад
You need to adjust the headlight housing slightly, they need be aligned with thebwings a bit better. Easy adjustment to make, just tweak them when the headlights are removed.
@zedeg94
@zedeg94 Год назад
Looks good! Now what's left is to add the badge in the back and stock-ish (or more like period correct-ish) wheels! And please, coat headlights/taillights, save yourself from future headache!
@996Revival
@996Revival Год назад
The lights are looking suuuuper fresh man. Well done!
@matt13ross
@matt13ross Год назад
Thanks!
@WatchingYoutubeVid
@WatchingYoutubeVid Год назад
you actually did it 👏
@billhibbard8664
@billhibbard8664 Год назад
Great job! Looks 100x better than before. 👍
@davidhewitt3070
@davidhewitt3070 Год назад
Hey, great job - the car looks awesome now. Regarding the projectors, on my turbo I fitted the projectors from retrofitlab. It was a bit fiddly to install, but worth it - I didn’t change the ballast, retrofitlab also say that ballast is high quality on these cars and should be fine 👍
@matt13ross
@matt13ross Год назад
That's what I'm going with I think.
@dkosawa
@dkosawa Год назад
Great job!! I look forward to seeing new seats. 😊
@barryhall7
@barryhall7 Год назад
Brilliant work, it looks amazing 👍🏻👍🏻
@matt13ross
@matt13ross Год назад
Thanks!
@ryanstewart6121
@ryanstewart6121 Год назад
Looks great Matt! Glad you fixed the taillights
@S2NAZ
@S2NAZ Год назад
Cars really starting to look amazing Matt 👍🏻
@tomasis7
@tomasis7 Год назад
good job, bro! It is much easier to work on the car now because it amuses you more.
@MunchieFreak
@MunchieFreak Год назад
OEM Tail light looks That is the way to Go!!!!!👋👋👍
@joncamilleri2172
@joncamilleri2172 Год назад
Brilliant job, I love this build.
@ricardoharewood775
@ricardoharewood775 Год назад
Cerakote is your friend. Has been holding up well over two years in hottttt Caribbean sun no yellowing or peeling.
@wlff88
@wlff88 Год назад
Much better. It was horrible before but the tail lights now look spiffy
@j.a.therollingman9216
@j.a.therollingman9216 Год назад
Pause the video on 10:28 and look how sick that looks! You need headlights with black housings🤭
@anthonybrand6137
@anthonybrand6137 Год назад
Hey Mat, I knew you'd get round to the headlights /taillights eventually! Despite the fact you said this cleaning & polishing wasn't fun or very enjoyable, but the end results are totally worth it. The car now looks 'complete' & so much better IMHO. 👍🔥👍
@matt13ross
@matt13ross Год назад
Def worth it!
@MichaelThorne_za
@MichaelThorne_za Год назад
Looks sick man! Nice work.
@joshbsz
@joshbsz Год назад
Spraymax 2k clear or Eastwood 2k is the way to make them stay clear after a polish if you want them to stay clear.
@matthewwain9958
@matthewwain9958 Год назад
Finally... a youtuber that actually removes the lights when sanding and polishing. (edit: Having done a quick polish on plastic lenses before you NEED to protect the surface or it will yellow within weeks.)
@matt13ross
@matt13ross Год назад
Haha! Possibly clear coat in the future, but no way they will yellow within weeks while sitting inside. I'll prove it :)
@matthewwain9958
@matthewwain9958 Год назад
@@matt13ross OK. Just thinking of my mitsu eclipse lenses I did and were quickly getting a haze to them again.
@matt13ross
@matt13ross Год назад
In the sun all day, yes, I would agree.
@chrishaug
@chrishaug Год назад
Awsome work! Dont forget some uv clearcoat on the headlights or else they Will get yellow crazy fast 😊
@matt13ross
@matt13ross Год назад
Maybe in the future, it stays inside.
@b8.5s47
@b8.5s47 Год назад
Honestly, with silver wheels, I think it’d look much better with the yellow. But overall, solid car, one of my dream cars when I was growing up!
@matt13ross
@matt13ross Год назад
I agree now. The black wheels look good, but they looked better when they car had more black accents.
@cristmh
@cristmh Год назад
@@matt13ross - OEM Turbo Twists look amazing on these cars.
@jamest5149
@jamest5149 Год назад
You could have stopped at 1500 grit and use proper UV automotive resistant 2 pak clear lacquer and they would come out perfect and last longer
@carloscristino8846
@carloscristino8846 Год назад
Great job man! Congratulations
@arthurgevorkyan2788
@arthurgevorkyan2788 Год назад
Uffff nice! Boxes are getting checked in!
@TimothyBrake
@TimothyBrake Год назад
Somehow this popped up in my RU-vid feed. I stayed for the tail lights and applaud your effort 😀👌 Also nice video editing skills 👍
@matt13ross
@matt13ross Год назад
Thank you, hope you stick around!
@mr.spokomaro
@mr.spokomaro Год назад
I use Osram night breaker bulbs. They are the best from everything I've tried. Had them on my E46 and now o my E92. They make huge difference no matter the lens or ballast.
@jona6183
@jona6183 Год назад
I concur, Audi S5 here . Used Chinese bulbs from Amazon and finally bit the bullet on osram night breaker. Osram is the only way to go.
@mr.spokomaro
@mr.spokomaro Год назад
@@jona6183 I did the same, had some "Amazon top recommended" bulb that were better than old oem but the improvement was like 15-20 percent. So I literally researched for good couple of weeks reading reviews and watching YT reviews. Like I said it was ridiculous difference. I remember driving on motorway with no street light at night and I couldn't see anything, this was my breaking point. By the way there is a new model out which is even better that I'm going to get before next winter. It's XENARC COOL BLUE INTENSE (NEXT GEN) D3S = 66340CBN
@MrHaun
@MrHaun Год назад
Yessssss!! Now it looks like the 996 Turbo we all know and love.
@peterwatson464
@peterwatson464 Год назад
well done! looks amazing
@yellowcolorado25
@yellowcolorado25 Год назад
Oh morimoto mled 2.0 is the way to go. If you want hids go with the morimoto d2s 5.0s. I have a quad setup in my zr2 with 4 55 watt ballast. It's an awesome setup.
@seshelbow336
@seshelbow336 Год назад
I painted the chrome inside my black 996T metallic grey and they looked far better……to get an idea of the difference on a yellow car compare a pic of a Civic EK4 Jordan to a yellow civic EK9…..identical cars pretty much except one has dark lights and one has chrome. The Lenses are a right pita to remove tho.
@matt13ross
@matt13ross Год назад
I was thinking of doing that! Can you send some pictures via email or Instagram?
@jeffreyjohnston6843
@jeffreyjohnston6843 Год назад
keep some old sheets and you use them to drape over your tool boxes when you are buffing things near them .
@matt13ross
@matt13ross Год назад
That would have worked.
@dravenpt
@dravenpt Год назад
That taillights fixed it´s a game changer, now just needs stock silver rims!!
@jazzdrumguy5044
@jazzdrumguy5044 Год назад
Headlights look great. An oil change near me will do them for $50, though. For tail lights, I would have upgraded to LED which is what I did with mine. Game changer!!!!
@225TTuned
@225TTuned Год назад
How about the tow hook cap!!! :) Car looks good! Sooo much work omg. Definitely agree needs a step lip barrel with a flat center wheel to really accent the curves since turbos are widebody! BBS or HRE like tanner faust setup 996. BC coils ride like crap, cheap way to slam it. KW or ST coils ride best wont hop over highway expansion joints in the turns.
@matt13ross
@matt13ross Год назад
I wouldn't call BC coils cheap, most say they ride excellent. I'm not getting Racelands or something lol. I don't want to slam it either, just about an inch or so lower.
@Iamjim1
@Iamjim1 Год назад
@@matt13ross take a look at an H&R/Bilstien (or whoever, really) cup kit?
@matt13ross
@matt13ross Год назад
I looked at a few. I was thinking those were very expensive.
@marcmercedes2707
@marcmercedes2707 Год назад
Hai , place your items on a rubber door mat , protect the item end dont move also
@jamiepollard9735
@jamiepollard9735 Год назад
🎉 Great content mate, fair play to the hard work.
@matt13ross
@matt13ross Год назад
Thanks!
@scotts2k
@scotts2k Год назад
Love the tail lights, Ronald Mcdonald
@vincentcarrano6329
@vincentcarrano6329 Год назад
Hey Mat, spectacular result ! You are the champion
@matt13ross
@matt13ross Год назад
Thank you!
@P-J-W-777
@P-J-W-777 Год назад
Looks so much better but I’m not one that hounded you about it let alone ever mentioned it since it had been mentioned so many times already. Just surprised you didn’t decide to change the entire light housings out for new LED’s since you’ve upgraded everything else to LED’s
@widebodycoyotemustang
@widebodycoyotemustang Год назад
Look amazing brother 🙌🏾🙌🏾 this car it’s so beautiful now congratulations!! And you work so hard on it my friend!! Great job 👏🏽
@matt13ross
@matt13ross Год назад
Thank you sir! It's because of you!
@vics945
@vics945 9 месяцев назад
They look beautiful Matt.. thank you
@leongossard4570
@leongossard4570 Год назад
Keep it up, I can’t wait to see what’s next
@patfriend4326
@patfriend4326 Год назад
I have been watching since u first bought this and I have to say well done Matt. And thank goodness u fixed those tail lights 😂😂👌
@lukeharrielson9357
@lukeharrielson9357 Год назад
Heck yeah dude!!! looking so dope!!!!
@yetidh9
@yetidh9 Год назад
You can use 3 big lumps of playdoh to hold the lights to the bench.
@jhawk1977
@jhawk1977 Год назад
Clear bra that front end with the fresh paint before it gets ruined.
@matt13ross
@matt13ross Год назад
Not a bad idea, but almost as expensive as just getting new paint on the bumper.
@jhawk1977
@jhawk1977 Год назад
@@matt13ross well, crap...
@Slytheslayer
@Slytheslayer Год назад
Not sure if these will fit but in my old acura tl type s I put the BMW ZKW-R lenses that are clear and do not have the fresnal rings on them. Your might not have those weird rings but the BMW ones are crystal clear.
@renaul_megane_rs_2254
@renaul_megane_rs_2254 Год назад
Looks nice ,rims on silver will look nice to
@wrestlevania
@wrestlevania Год назад
I was struggling to see the difference with the headlights on the bench after polishing, but once you refitted them and you can see them shining next to the new paint… 🤩
@matt13ross
@matt13ross Год назад
Oh yea, on the car they look MUCH different!
@fraserveal3297
@fraserveal3297 Год назад
Been watching since the start. Looks great brother!
@matt13ross
@matt13ross Год назад
Thanks for tuning in!
@Perceni
@Perceni Год назад
Very nice! if you're looking for the next cosmetic thing to do, do the calipers with the right decal size and font. Your car's are a bit off. easy diy and good for the channel.
@matt13ross
@matt13ross Год назад
Hrm, didn't realize that. If I do that, I'll get them recoated too.
@khz80
@khz80 Год назад
Well done! Car is looking brilliant :) What kind of spray are you using?
@matt13ross
@matt13ross Год назад
Thanks! It's just foaming glass cleaner.
@redsky7527
@redsky7527 Год назад
Great job on the lights. The car looks great! Does your rear wing warning message come on with the gt2 wing? Mine does.
@matt13ross
@matt13ross Год назад
Nope! Idk how the previous owner disabled that. But yet, he didn't fix the CEL or ABS lights, etc lol.
@atrain132
@atrain132 Год назад
For projectors, look at Morimoto Projectors.
@marceamendola
@marceamendola Год назад
👏👏 Excelente esta quedando, saludos desde Argentina!!
@matt13ross
@matt13ross Год назад
Thank you for watching and for your membership!!
@najuad
@najuad Год назад
that looks a million times better! What's happening with the exhaust tail pipe trims ? classic oval ??
@matt13ross
@matt13ross Год назад
Still undecided on what tips.
@roberttowsley8958
@roberttowsley8958 Год назад
Looks amazing 🎉
@olivervaldes4223
@olivervaldes4223 Год назад
LOL SO MUCH BETTER, SHES COMING TOGETHER. BEESWAX ON THAT LEATHER AMAZON IS UR FRIEND.
@matt13ross
@matt13ross Год назад
Leather is too far gone.
@alexanderhaering6428
@alexanderhaering6428 Год назад
3 piece bbs in silver would look so fire on that car
@matt13ross
@matt13ross Год назад
Agreed, but $$$$$
@heliolps2
@heliolps2 Год назад
Just a little ceramic coat on the lights will do the job
@dash456789
@dash456789 Год назад
Projector bowls are probably burned. Happens on BMW’s, Mini’s, and MB’s as well.
@Amereius
@Amereius Год назад
I didn't hate the black tint on the taillights, but the original red looks much better!
@ElliottBrooks
@ElliottBrooks Год назад
Now that your headlight lens are crystal clear - have you considered headlight covers? A quick google search finds some good examples
@Berti_00
@Berti_00 Год назад
So much better man wow.. but your buddy is right. BC coils to get rid of that wheel gap
@stanhill3803
@stanhill3803 Год назад
Matt, the car looks great. Put some exhaust tips on to finish it.
@matt13ross
@matt13ross Год назад
Eventually, yes.
@Jsjsj192
@Jsjsj192 Год назад
You can get now so nice led backlights for cheap and i think in 997 Style. 😊
@matt13ross
@matt13ross Год назад
Link?
@DG_427
@DG_427 Год назад
Huge improvement!
@zachbitzer8467
@zachbitzer8467 Год назад
turned out sick matt
@matt13ross
@matt13ross Год назад
Thanks!
@nenadvucicevic2026
@nenadvucicevic2026 Год назад
Try with morimoto or aharon bixenon projectors. They make retrofit kits
@cvpuga
@cvpuga Год назад
muuuucccchh better... nice goin! coilovers and DONE...
@tentywenty
@tentywenty Год назад
Just tuned in for the first time just because of the headlight resto and I recognized your e36 from ig, small world
@matt13ross
@matt13ross Год назад
Haha, nice! Hope you stick around!
@davidgray5583
@davidgray5583 Год назад
We know we have a hardcore detailing focused owner when he has a gallon of McGuiars Diamond cut ;-). I think I bought a quart and still have 3/4 left.
@matt13ross
@matt13ross Год назад
Haha, yup I've had it for years.
Далее
I Bought a Cheap Porsche 996 Turbo and It's Unfixable
27:07
My little bro is funny😁  @artur-boy
00:18
Просмотров 10 млн
Porsche 911 Turbo generations DRAG RACE
14:20
Просмотров 3,9 млн
Porsche 993 vs 996: Owner of Both Reveals The Truth
21:17
Porsche DOES NOT want you to know this!!!
18:53
Просмотров 370 тыс.
My Porsche 911 996 has a big problem!
33:01
Просмотров 681 тыс.
Когда купил машину 300+ л/с 🤔😂
0:59
Чуть не загорелся 😂
0:57
Просмотров 572 тыс.