Extreme BMX Repair Using the WRONG TOOLS!‼️🤯  

He’s tuning it

可以翻译吗

😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊😊

❤❤❤❤❤❤

​@@user-gy1ej9tq7hah kau membuat roda belakang menjadi roda depan.

Or not well😢😢😢😢😢😢😢😢

Yeah it is. The rain, the wind, the cold but you're in a little pocket of shelter. The feel of the cold steel, the sound. I can imagine it.

@@Christopher-ko9opperfectly described. While reading this, I was sent back to the very old skating days ❤️

And probably sitting in piss 😅😅

@@goodhouse91021 lol don't ruin it!

Underrated comment

Damn I thought the same kudos

Retuned the wheel more like it

A shit vibe 😂

Not really... wheel builds are a pretty common thing...

Hahaha 🤣

Keeps the park cleared though 😂😂

very good 😂

😅

why ??

@@mirza6399 because he turned a back wheel into a front wheel

😁💯👍😆

Yes I am a dirt bike rider and grew up working on them. One job I will never ever do again is respoking a rim. Fk that I just buy new rims when I need them

Used to work in a small town hardware store shop that did a little bit of everything, this was one of, if not my least favorite things we'd fix lmao. Soooo time consuming

We used to just use the brake pads to gauge them. I think it took me around 3 hours to lace and tru a wheel

I was thinking the same thing

I actually love building wheels. Best I've done is on my Hyper and i built both in about an hour and a half start to finish.

I was gonna say very, very good, although I’m just gonna keep it positive very good very good content very good content you Musta had a good father or a good guardian to show you some stuff about mechanical

Me too. i have one sitting in my front room for months

trial and error. practice makes perfect

This and 10 speeds is the worst of bike building

@@conorharford5117pppp😊ppp😊pp😊pppppppppppppppppppppp😊ppppppp😊p😊😊pppppppppppppp

Yes! We needed a front wheel and this rear Rim was in perfectly good condition, so we recycled it! ♻️

Yeh you tune your sit heights.😂 It's a bmx about the only things changing is seat height and tire pressure.

​@@fotis3v480 get fuckin' rekt. You just got boomersplained to. Love you both, much love and respect. Hopefully you both can resolve your differences respectfully.

He literally turned a back wheel into a front wheel. He’s got 2 front wheels now

We made a NEW front wheel for someone to ride down the skatepark! Glad you enjoyed the content

qeq

ему бы в армию бордюры красить

Creo q es para poder centrar la rueda, puede utilizar el trinche como guía

@@jopequi weon lo que dice es que despues de cortar la llanta trasera, monta una delantera pero al montar la delantera hay una trasera montada

​@Ferrari255GTO cutting rear spokes, a wheel is complete.....made up of a tyre (the rubber bit) a rim (the metal bit the tyre sits on) spokes and a hub (the centre piece in question). Can confirm he never cut a tyre. Yes he did mount a rim that was on a rear hub to a front hub, probably bought a new rear complete then used the old one as its a sqaured edge rim....most g sport or skylark front rim's have a rounded edge....he wanted matching wheels not one rounded one squared in a set

@@elite_riddimzgaming3427 yes, i know what both spokes and spoke nipples are, i was generalizing. Also llanta is Rim, not tyre, tyre would be Neumatico o Cubierta

yep. you're exactly right. it's a total setup oopsie video

try doing this urself bucko

Look at the caption first

Useless comment

Yeah when I feel dumb I'll just remember you.

😂😂😂😂

Hahaa! 😅 Yes we actually finished it off inside the workshop using the tool. But this method is possible… just very hard like you said!

​@@T77BMX good video!, i even adjusted mu wheels some time ago, lateral truing is easy but having a round wheel isnt! haha cheers keep on the good work

@@T77BMX if you start by threading every nipple just to the point where every t hread is covered, known as "zeroing spoke nipples", every spoke will be evenly threaded and you can then just add 2 turns per spoke at a time going around the wheel until its tight. if it was a good rim to begin with and proper length spokes you will get a true wheel

Chicken

@@FrustratedBaboon definitely mate but tbf I know if I did it my bike would never work agin

В этом теряется весь вайб DIY.....

@@Tim_On_Line 🤷

Thank you my brooo!! thats too kind 👊👊

It's called editing....

😂😂

HAhaha. Not quite... But thanks for the comment! 🤣

@@T77BMX entirely satire, turned out great and you did something I never knew before.

Thanks brooo!! 🤣👊

Now i understand lol ty. My ocd would probably have me do the same... but minus doing it myself 😂

Thank you for explaining. I was confused

Thank you so much bro thats awesome!!! 👊👊👊

HAhahaha 🤣

G59 till the grave

Brought me back in the days when I used to work in a bike shop and one of our specialties was creating wheels from scratch, not an easy job. 😊

Hahaha my guyyy!! thanks brooo much appreciated 👊👊👊

Hahah yes that would be even better brooo!!! 👊

Thanks a lot Bro! 👊👊

Ohhh nice!! Haha just the sitting spokes? 🤣🫡👊👊

haha yep!! the spokes were too rusty they all broke really easy. And the old hub needs a full internal service. But the rim was in perfect condition! thanks bro 👊

Waheyyy!! thats an aweosme comment bro! thanks so much 👊👊👊

They're identic There aren't front or rear rim

@@elelly1845 i think he's asking for a full rim not just the ring of the rim, otherwise there'd be no need to specify

@@Ferrari255GTO point is there is no rear rim, however there are rear hubs and rear wheels. proper terminology is important when dealing with wheels. tire rim spokes hub all together make a wheel.

hahaha its ok it is now! 👊👊

Yes!! The G sport rim is very good rim with loads of life left in it… and we needed a nice front wheel. Mission at

Thank you broo!! 👊👊👊

🤣🤣🤣

😂

Hahha niice!! yeah the old school rims were super weak they must have broken every weekend!! Glad you enjoyed the content, thanks for the comment!👊

@@T77BMX I had a set of 1987 gt gold rims (idk specifically) but as a 13 yr old I could lift the while GT with a pinky easy, most of it got stolen. Chopped right out of highschool but that ol GT took everything I gave it. Went thru dirt vert canal and street ramps. Ol girl took anything I could give it(unlike my hs gf 😆). Now I think about jumping on a bike I gotta let the ER know before I set out 🤣

YES!! thats awesome bro thanks for the comment!! 👊👊

Hahaha!! niiice man, thanks for the comment👊👊

@@T77BMX 👊👊

Thanks broo!! yes the Spokes were too rusty and the Hub needs full internal service. We re-used the rim because its in good condition! thanks bro 👊

YES! thats so true bro 👊👊

You the man!! 🙌🫡

@@T77BMX check out the komatsu pc01 for building jumps. I want 1 so bad

YES! Very smart broooo. We did loosen these spokes first so tension was not too strong for when we cut the spokes!! thanks bro 👊👊👊

HAhaha thanks broo!! 👊👊👊

Thanks brooo! 👊👊

Thank you so much bro!! yes re spoking can be sooo hard sometimes! thanks for the comment broo 👊👊

Wiiicked! Thanks for the comment dude we are glad you enjoyed it!

Thank you so much bro!! Yes we almost had all the correct tools, It was just the Truing stand at the end to make the rim straight... 👊

Haha!! Glad you liked it!

Hahaha no Way! that would be hella sick!!! 👊

Thanks bro! unfortunately the spokes were too old they were all rusted and broken!! so the nipples didnt work anymnore... We re-used the rim because its in good condition! 👊👊

HAHAHA yeppp! its a pain in the A**! 🤣👊

Yes! The spokes and hub needed replacing ♻️

Hahaha! That’s so true bro I was really stressin that I would forget something 🤣🤣👊👊👊

Thanks brooo!!! 👊👊👊

YES! Exacltly. Because the rear wheel was Broken so we used our brain to create new Wheel out of the Rim that was still working!

Thanks for the comment bro! Unfortunely the old spokes were rusty they didnt spin on the nipples and they were breaking super easy!

@@T77BMX thanks for elucidating that my friend

F u, want a piece of me? Us riders stick together just like the local drug dealers yall became and now we war.

God damn 😮

Haha yess!! thats what BMX is all about!!👊👊👊

Lol an so what the job was done perfectly

@@onelovejl8098 That was my point

🤣🤣🤣🤣 hahahaaa 👊

Hahaha!!! niice. Yes very valuable skill to have down the skatepark!! 👊👊

Cheers dude!

Hahaha someone else said that too!! hahahaha bringgs back some memories 👊👊👊

Thats awesome!!! thats very kind of your dad to teach you bro!! its not easy and a very cool skill to have 👊👊👊

Haha, Yes but then when the spokes come loose you will need to tighten them anyway! its a skill worth learning. Thanks for the comment bro! 👊

@@T77BMX True true 💪🏾

YES! Thanks broo 👊👊

You Uncle.. Not mine 👊 haha

Hahahaa my guy!! thanks bro 👊👊👊

Yes! We recycled the Rim Into a new front wheel! So happy with how it came out 😎

@@T77BMX so you put a new back wheel on?

@@RussY0 He took the back wheel of a different bike, added a front hub + spokes on it, because he needed a new front wheel for his bike.

@@cloudsteele1989 I didn’t notice a different bike

@@cloudsteele1989 ah I see. Didn’t see that bit

Awesome!! Thanks for the comment, We are glad we could show you something New!! 👊

Oh no!! sorry you didnt enjoy it bro.

Thank you so much!!

Thank you so much broo!! 👊👊👊

HAhaha! Excellent comment! 🤣👊

YES, but the old wheel was broken. The hub need a full internal service and the spokes were too rusty they didnt spin on the nipples. 👊

HAHAHA! 👊👊