F150 4" lift kit (How to drop from 6" to 4") 

Thank you, yes its pretty simple I know some people buy a whole new kit and this is the best option.

Thank you

Yes sir it should be fine

@@RigoG09 I did some more research into it, and I would also have to swap the rear shocks. The shocks are sized for the 6” lift. My next concern would be the blocks under the airbags

@@Ryansanders729 Yes if you have the shocks for a 6” then yes those will have to be replaced as well, the shocks under the airbag if you have the stock ones they will work as well but I think you have the 5” ones if your truck is lifted at 6”. But just swap to the OEM ones and you should be fine.

It would be great if you had the part numbers listed.. I told stage3 that you gave them a shout out… lol but they had no idea what parts I would need..😔😔

Yes you can use the original blocks, but it would sit a bit lower the 3” blocks would be a better height.

I sold the truck about a year ago, I don’t have pictures

They ride pretty good, but the bilstein would be great also I had those as well rode pretty good too.

I believe its possible, I had an XLT as well but I changed the badge on this truck to LOBO. I say I had bc I sold this truck over a yr ago.

@@RigoG09 where can I get a LOBO badge?

@@alejandrorodriguez3239 I ordered mine off Amazon, and I just repainted it

I bought the kit from the rough country website.

These are the alfarex nova series lights

Yes im running 2” spacers from rough country

Yes I replaced with new factory they had a better angle than the camburg ones.

Great thanks for info glad to find this video!

@@dannyshort135 No problem glad to help

Yes you could use it also, although if you don’t have a 6” lift already with the new crossmembers you could just get the 3” coils and new uppers to correct the angle.

I have the 6” lift

@@JasonWood-vj2rk In that case then I believe that 3” kit will make your upper control arm higher than normal since most of the front suspension is already dropped with those drop brackets that come on the 6” lift.

@@RigoG09 thanks.