Тёмный
No video :(

Fairmont 7 - Monkey fab fuel lines install 

Sloppy Mechanics
Подписаться 135 тыс.
Просмотров 4,3 тыс.
50% 1

quick point and blab here with lines completed on fuel system.
=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=-==-=-=
Check out SloppyMechanics.com for links to commonly used facets of sloppy.
check out our shopify store
www.sloppymech...
if you would like to send things,
and you most certainly do not have to,
but if you are feeling inclined to do so!
please mail to:
Matt Happel
175 N Chestnut St
PO Box #142
Bath PA, 18014
----------------------
Check Out Sloppy sponsors and discount codes from them!
Monkey Fab MFG - (monkeyfabgarag...)
Discount Code "sloppy" for 5% off most items
TorqStorm Superchargers
torqstorm.com/
Snake Eater performance (www.snakeeater...)
Discount Code "sloppy" for 10% off entire store
Reversion Raceworks - Dash Inserts and more
/ reversionraceworks
Use Code "SLOPPY5" to save 5% on whole store
Hunter Tuned - www.huntertune...
Mostly centered around honda parts
use discount code "SLOPPY" to get 10% off
Lowdoller Motorsports - lowdoller-moto...
Discount Code "sloppy" for 5% off the store
Codion Motorsports ( / codion-889312128079667 )
Forced Performance - (forcedperforma...)
Hughes Performance - (www.hughesperfo...)
Holley performance (www.holley.com/)
LSX Specialties ( / lsxspecialties )
Dirty Dingo Motorsports (www.dirtydingo....)
Summit Racing LS (www.summitraci...)
Brian Tooley Racing (briantooleyrac...)
VS Racing (turbo4less.com/)
Warr Performance (warrperformanc...)
ICT Billet (www.ictbillet....)

Опубликовано:

 

26 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 44   
@cameron878
@cameron878 11 месяцев назад
Ahh yes the drug smuggler 9000 tank, it's the best
@robwigglezz944
@robwigglezz944 11 месяцев назад
I love when the strong hand comes out.
@ericbell530
@ericbell530 11 месяцев назад
The stick hand always makes me laugh. 🤣
@bigfoot355
@bigfoot355 11 месяцев назад
Yes, wondering about doing PWM
@Burndown
@Burndown 11 месяцев назад
Stop, Hammer time!
@Califormula
@Califormula 11 месяцев назад
Thank you for the info Mr Sloppy, like always!!!!
@TheBrokenLife
@TheBrokenLife 11 месяцев назад
The drug hiding port is an absolute positive of the build. 😂
@TurboDog73TX
@TurboDog73TX 11 месяцев назад
Pretty sure border patrol is already hip to the dope in the tank mod, but thanks for sharing.
@BlaserBuilds
@BlaserBuilds 11 месяцев назад
Liking all of the things...
@wadebonhomme2142
@wadebonhomme2142 11 месяцев назад
I like that hose, sounds a lot easier to make
@SloppyMechanics
@SloppyMechanics 11 месяцев назад
it took minutes, to make them all, finally some peace lol
@Turbogto_guy
@Turbogto_guy 11 месяцев назад
Whoa whoa whoa there buddy! You cannot say sloppy mechanics anymore. It’s now Snazzy mechanics!
@Ribbityibzki
@Ribbityibzki 11 месяцев назад
Idea that might be more trouble than it's worth: could you build an output for the fuel pumps that automatically commands duty cycle to try and hit a target fuel pressure? It would be hard to do with a regulator maybe. I dunno. Just spit balling. It's kind of how a lot of modern cars do return less systems now.
@SloppyMechanics
@SloppyMechanics 11 месяцев назад
you could easily do that but you want more than you need when your demand swings between 400-900whp while pedaling
@Ribbityibzki
@Ribbityibzki 11 месяцев назад
@@SloppyMechanics Right, you get what I'm saying. I'm just not sure how to build that table in Holley. Like you want 75psi fuel pressure when you're making 15psi boost. Like target fuel pressure is based on MAP value. It would just be time consuming to figure out what duty to run the fuel pumps at to achieve each fuel pressure, and it's a moving target based on load and RPM
@SloppyMechanics
@SloppyMechanics 11 месяцев назад
@@Ribbityibzki yes you could easily build a Target fuel pressure table and have PWM up and down figures to maintain that target very similar to PID closed loop, yes
@Professionalhomeowner1
@Professionalhomeowner1 11 месяцев назад
Dumb question But couldn’t you stack the grounds and use the extra post for a third hot if needed/ wanted ?
@SloppyMechanics
@SloppyMechanics 11 месяцев назад
you could at the risk of over current on your ground on a high draw situation.
@bigbuck610891
@bigbuck610891 11 месяцев назад
Hey Matt what’s the chances of fitting 2 walburo 450s in that surge tank. I believe dimensionally it should work
@SloppyMechanics
@SloppyMechanics 11 месяцев назад
its made to fit 3 of them, specifically
@noahmc1547
@noahmc1547 11 месяцев назад
Provide a link for the exact fuel line please!
@UpNorthCatsFan
@UpNorthCatsFan 11 месяцев назад
It’s says “not” e compatible and to use PTFE hose on his site. Are these different hoses?
@noahmc1547
@noahmc1547 11 месяцев назад
I had the same question. Which one is it? Wish he had a link for the hose.
@justinmalbrough3754
@justinmalbrough3754 11 месяцев назад
On this setup could run the regulator in the rear with a return? Does it give problem’s when starting?
@SloppyMechanics
@SloppyMechanics 11 месяцев назад
you could but you would sacrifice flow
@taylortankersley6325
@taylortankersley6325 11 месяцев назад
Mott, what data are you referencing when ramping your pump speeds when I assume you're still using that boost referenced regulator to maintain fuel pressure? Just the VE table?
@SloppyMechanics
@SloppyMechanics 11 месяцев назад
ill probably trigger from fuel flow or a custom 3d map/tps table in advanced
@davidthurman2267
@davidthurman2267 11 месяцев назад
What brand electrical ends and heat shrink do you use? Looks super clean
@SloppyMechanics
@SloppyMechanics 11 месяцев назад
i buy 100ft rolls of shrink tubing and always non insulated crimps, these are actually monkeyfab eyelets with his shrink tubing over them also. the surge tank comes with bare eyelets also, just the fitted clean shrink tubing always looks and fits best
@davidthurman2267
@davidthurman2267 11 месяцев назад
@@SloppyMechanics thank you sir!
@bobbobby1846
@bobbobby1846 11 месяцев назад
at the 6:00 minute mark, i cant get my hand through the fill neck because it is small. I am looking at the hand on a stick laughing my ass off.
@SloppyMechanics
@SloppyMechanics 11 месяцев назад
hahahhaa
@NorthofELangling
@NorthofELangling 11 месяцев назад
Hey Matt, where did you find that main fuel cell ?
@ryanlovins1607
@ryanlovins1607 11 месяцев назад
That and where did you get the fill cap with the wire mesh
@SloppyMechanics
@SloppyMechanics 11 месяцев назад
it was very similar to this one that we modified. www.ebay.com/itm/314570853477?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=7ioeb7authe&sssrc=2047675&ssuid=GK088Tq0Rue&widget_ver=artemis&media=COPY
@SloppyMechanics
@SloppyMechanics 11 месяцев назад
@@ryanlovins1607 its a funnel ive used for years for fuel, coolant etc www.speedwaymotors.com/Speedway-Triangular-Red-Funnel-with-Filter,7220.html?CSEGoogle&CSE&CSEGOOGLE&gclid=Cj0KCQjw9rSoBhCiARIsAFOiplmtp5PyiCYMrqRHbIJoQ1oZ6zWUsgFxbZRSjioSVVnd7l7tBA0-jX0aAvvNEALw_wcB
@ryanlovins1607
@ryanlovins1607 11 месяцев назад
Awesome, thank you
@NorthofELangling
@NorthofELangling 11 месяцев назад
@@SloppyMechanics thanks a lot Matt !
@illnock1
@illnock1 11 месяцев назад
Drugs lol
@BigRedRocketScience
@BigRedRocketScience 11 месяцев назад
Not a useful idea, but couldn't you ignore the stage 1 & 2 labels, and just use the posts as common ground, pump 1, pump 2, and pump 3? I mean the ground lug might melt from current, but possible?
@SloppyMechanics
@SloppyMechanics 11 месяцев назад
you could absolutely do that also, but you could possibly over current a single ground stud
@beecj0
@beecj0 11 месяцев назад
.
@genemounce8302
@genemounce8302 11 месяцев назад
Nothin like some good ole hand content in the mornin..🤣💪🤏
Далее
fairmont 7 surge tank assembly and ramble
11:57
Просмотров 6 тыс.
F7 Torqstorm non intercooled e85 dyno test
13:16
Просмотров 31 тыс.
Whoa
01:00
Просмотров 24 млн
СЕРЕГА ПИРАТ - TEAM SPIRIT
02:37
Просмотров 227 тыс.
How To Choose And Use Hardline
6:48
Просмотров 92 тыс.
NEVER install these programs on your PC... EVER!!!
19:26
review - Vevor steering endoscope
10:35
Просмотров 3,6 тыс.
afternoon complete fuel system replacement
39:40
Просмотров 58 тыс.
BRAIDED FUEL LINE HOW TO!!
8:50
Просмотров 12 тыс.
THE ULTIMATE BUDGET SURGE TANK FROM ALLOYWORKS!
20:43
Просмотров 4,4 тыс.
gold lite - the new micro mini ms3
5:05
Просмотров 11 тыс.
Whoa
01:00
Просмотров 24 млн