Falcon 4 BMS Tutorial 21 : ILS Landing

Подписаться 7 тыс.

Просмотров 12 тыс.

50% 1

In this tutorial we will repeat the previous exercise and land at Kunsan. But this time our approach and landing will be done at night. These conditions remove the visual cues that we depended upon for a safe approach. Without them we must rely on the Instrument Landing System, or ILS. This tutorial explains the principles behind ILS, and how to use the system.
For more videos like this and more sim information visit my simulation blog at www.zoomsim.com.

Игры

Опубликовано:

4 ноя 2016

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 37

@jasonblackwell220 7 лет назад

Another great tutorial Supernova...thanks!

@supanova88 7 лет назад

You're welcome. :)

@totoritko 7 лет назад

You're always landing very short, both here and on the VFR landing video. You're basically mowing the approach lights. You should aim your landing at the point where the PAPI intersects the runway.

@supanova88 7 лет назад

Yes. Landings are always the most difficult part of the flight.

@baronburgamot243 7 лет назад

Yeah I noticed that too. Lost like 130 feet in about 10 secs from 9:35 to 9:45 which is ROD of -1000ft/min. You can see the PAPI change at 9:19 to show that the glide slope is off. Tbh, I have the opposite problem; not enough ROD - which means I shoot a couple bolters on carrier landings usually, still, rather fly the go-around than smack into the back of the ship! haha

@andyrudeseal6347 6 лет назад

He has some excellent, detailed videos and I've learned so much from them. However the landing videos kinda surprised me in that the FPM should be within the AoA bracket [11 to 15 deg] along with the -2.5deg glide slope around the runway threshold.

@Saucebrunette 7 лет назад

Damn your tutorials are nice!! Thanks!

@supanova88 7 лет назад

Thank you. :)

@drewt.4353 3 года назад

Nicely done tutorial for the complete noob. Thank you.

@supanova88 3 года назад

You're welcome. :)

@jcbcorner8464 7 лет назад

thanks !!

@supanova88 7 лет назад

You're welcome. :)

@hanibelsoun9370 6 лет назад

Hi. Thanks a lot for your video. Is there any way that we can set up the autopilot to land the plane after we are done with the mission objectives? Thanks a lot.

@supanova88 6 лет назад

The F16 doesn't have an autoland system. You can end the mission in the air, but that might fail the mission.

@RevsBlueChurch 7 лет назад

is there a way to preform an ILS approach without the HUD indications? if, say, it were to malfunction or something like that

@supanova88 7 лет назад

You can use the HSI and ADI.

@frequentsimpilot7311 6 лет назад

This is strange to me because I'm a commercial sim pilot. Why do you put on the speed brakes after extending the landing gear? That would burn fuel quicker because you will need to add more power to mantain the aproach speed. Why?

@supanova88 6 лет назад

The idea is that if you need to go around it's quicker to retract the speed brake to add speed than to add power.

@frequentsimpilot7311 6 лет назад

supanova It is quicker not to even extend the speed brakes rather than extending them...still don't understand

@supanova88 6 лет назад

You're slowing the aircraft down for landing by extending the speed brake. If you then retract it you're regaining speed more quickly than if you simply reduced and then added power.

@GZA036 5 лет назад

The idea is to keep the turbines spooled up at a higher RPM

@Lb8068 7 лет назад

When I've tried to do this during missions I've had an "ILS OFF" message on the TILS ICP page. Is there any way to fix this?

@supanova88 7 лет назад

Turn the ILS knob on the Audio 2 panel.

@Lb8068 7 лет назад

supanova Thanks very much! Another quick question if that's alright - how do I "mute" the ATC during a flight? Listening to AWACS and ATC at the same time during a mission is a nightmare.

@supanova88 7 лет назад

You can reduce uniform and victor volumes with the comm1 and comm2 knobs on the Audio 1 panel. You also have to decide what channels you want on uniform and victor. For more information read the section on aircraft radios on page 91 of the BMS manual, which is in the install docs folder.

@Lb8068 7 лет назад

supanova Thanks again, you're very helpful!

@supanova88 7 лет назад

You're welcome.

@xX_Gravity_Xx 4 года назад

I don't have an intrument mode panel.

@supanova88 4 года назад

I can only imagine you're using an earlier block that doesn't have the panel.

@YTMNDMadMax 4 года назад

There's an, "M" underneath the HSI near where the navigation panel used to be. Push that M to switch modes.

@xX_Gravity_Xx 4 года назад

@@YTMNDMadMax Ah, okay, thank you

@assafgol Год назад

This is a tutorial for advanced users. What’s an ICP? Any chance to make a simple tutorial for us noobies?

@supanova88 Год назад

The ICP is the Integrated Control Panel. You can think of that basically as the controls under the HUD. ILS does cover some fairly complex topics, but if you've mastered the standard approach and landing it should come with practise. To familiarise yourself with the cockpit I would recommend the ramp start tutorial: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-zLpjwuEsTGc.html