Тёмный
No video :(

Fan Clutch Detroit Diesel - Problem Fixed 

Outback Trucker Buck
Подписаться 5 тыс.
Просмотров 66 тыс.
50% 1

Fan clutch problems, we do not want to know or except the fact and face the damages because it can get to be complicated and very expansive
But most importantly, knowing where is the problem, what problem you have and target the situation and fix it, lots of time maybe that is not the problem or maybe it is
In this video you can see that I knew the problem and I have analyzed it before and making it sure that is the issue then target the problem and get it fixed
Fan Clutch Problems
Stayed on
Manual switch did not turn off fan from spinning
slight air leak from fan clutch
too much noise
problem eliminated by replacing a new clutch fan.
/ truckerbuck
www.commercialtrucktrader.com
www.auctiontime.com
Without the consent of the owner, Copying and distributing this video is a violation. Please ask before doing so. Thank You

Опубликовано:

 

5 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 20   
@Montoya1991
@Montoya1991 2 года назад
Good video, what symptoms did you notice on the fan clutch that you noticed it needed to be replaced?
@ktcarroll4723
@ktcarroll4723 5 лет назад
My experience is if you don’t remove the radiator try and put something in front of the radiator to protect it from the blade hitting it and knocking holes it. My fan feel forward and 3 blades hit the radiator and I had 3 springs of water shooting in my face
@seal5215
@seal5215 4 года назад
Hi OBTT. Question for ya.What kind and model of semi do you drive? TKS kudos from West Palm,Bch,Fl.
@gerardodelacruzortiz6153
@gerardodelacruzortiz6153 6 лет назад
That is kysor style fan clutch. When a major repair is done, never forget to change the bearings inside the pulley. There are 2 bearings and if they have worn and aren't changed, the little black couple inside the fan clutch gets melted
@OutBackTruckerBucky
@OutBackTruckerBucky 6 лет назад
Good to know, Thanks
@timmay2k
@timmay2k 2 года назад
My paccars doing the same. Just replaced radiator thermostats and fan selenoid. Fan spins constantly. Gonna replace the fan clutch since it’s the original and has over a million miles on it.
@coreyadams4646
@coreyadams4646 4 года назад
Great video, mines is fan clutch is always engaged and turning. Checked the solenoid and when the air pressure reaches 90psi the solenoid is allowing air to enter the fan clutch which tells me the solenoid is good. . Also my fan clutch is leaking air. So its bad. Another job has to get done.
@shmirbuchanan8673
@shmirbuchanan8673 4 года назад
Hey was it the fan hub leaking air or a bad fan clutch?
@charlesadewale7745
@charlesadewale7745 4 года назад
If fan rolls freely does it mean it’s bad,got 07 m2 ,rolls freely when engine off,but won’t come on automatically anymore ,overheating might that be a bad clutch ?
@eduardoleandrofernandesrod3377
@eduardoleandrofernandesrod3377 4 года назад
Yes that is bad... mine is doing that and now i am watching vids on how to remoce the damn thing
@thowguandong3076
@thowguandong3076 2 года назад
Was it the fan clutch leaking air or fan hub leaking air?
@JodBronson
@JodBronson 7 лет назад
The Repair guy bending the Radiator Fins :(((. Looks like he's careless, trying to remove the Blade :((((
@marshallsheldon8375
@marshallsheldon8375 6 лет назад
didn't torque the fan clutch
@secomeco724
@secomeco724 5 лет назад
I didn’t get it how your truck is running in the fan and stab can you tell me how this happened
@ReptoOwnsYou
@ReptoOwnsYou 5 лет назад
The fan only turns on when needed by the ecu depending on the coolant temperature etc
@whatheworld
@whatheworld 7 лет назад
Nice clip Buck. That should fix you up now !!
@OutBackTruckerBucky
@OutBackTruckerBucky 7 лет назад
Very true , this was a technical job that we got it accomplished
@CASHBOSS10801
@CASHBOSS10801 4 года назад
Guys when you do the repair.ALWAYS REBUILD THE PULLY. If not that clutch will go bad again the pully bearings that’s were the problem starts.
@ictviamfortruthgoogleisspa5886
@ictviamfortruthgoogleisspa5886 3 года назад
Most Valuable part COULD be is HOW exacly you removed it,, but you skipped that part... the rest is useless BS
@skid3339
@skid3339 2 года назад
Remove the hub screws then you can slide everything towards the radiator then up and out
Далее
Manually Locking the Prevost Fan Clutch
4:15
Просмотров 5 тыс.
60 series Detroit injector problem
7:22
Просмотров 25 тыс.
Detroit DD15 Longevity and Durability
17:10
Просмотров 453 тыс.
DETROIT 60 SERIE 12.7 FAN CLUTCH REBUILD KIT
2:55
Просмотров 2,4 тыс.
ECM controlled fan clutch bypass Cummins ISX part 2
7:59