No video :(

Fastest 3D printed Mainsail logo ? 1500mms @50K Ludicrous speed

Подписаться 35 тыс.

Просмотров 159 тыс.

50% 1

Torturing the Vz235 on this one. Mainsail team wanted to see their logo printed at the fatest speed possible on this printer... here it is guys!I do the stupid things so you don't have to do it haha.Well im glad how this little monster performed. Rock solid :)
(@50 it takes 22.5 mm of movement to reach 1500mms)
Printers:
-full Vz235 printer kit: s.click.aliexp...
-Full Vz330 printer kit: s.click.aliexp...
Printer Parts:
- Waterpump kit I use here: s.click.aliexp...
-240mm Radiator: s.click.aliexp...
-120mm x2 fan: s.click.aliexp...
-Vz-HextrudORT watercooled : s.click.aliexp...
-Goliath watercooled : s.click.aliexp...
-Fly Super 8: s.click.aliexp...
-Drivers s.click.aliexp...
- XY Motors: s.click.aliexp...
-Alu Water cooling blocks: s.click.aliexp...
-Fittings: s.click.aliexp...
-water cooling kit: s.click.aliexp...
-48V PSU: s.click.aliexp...
-CPAP fan: s.click.aliexp...
-CPAP tube: s.click.aliexp...
(complete part list can be found on the BOM list on github link below)
-Eibos filament dryer: s.click.aliexp...
Full VzBoT Printer project: (BOM, cad, stl): github.com/VzB...
CNC Parts on Mellow Store Aliexpress or f3d-racing-fdm...
Visit Mellow Store for VzBoT parts: mellow.aliexpr...
Please join us on FB: / 4098868770205560
Disord: / discord
If you wish to support: ko-fi.com/vez3d

Опубликовано:

29 июн 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 402

@iBlue0riginal 2 года назад

This is illegal. 3d printing police gives you a speeding ticket.

@rakanal.2925 2 месяца назад

The speeding ticket i wish i could have

@neoc03 2 года назад

We're getting close to the movies where 3d printed things just show up almost instantaneously. I also love seeing the joy and passion behind this project.

@FiglioBastardo 2 года назад

You aren't kidding! This is nutty to watch.

@OscarOliu 2 года назад

By this guy and his community too, pretty sure he's the pioneer of the speed stuff so far :D

@marsgizmo 2 года назад

this is beyond impressive, awesome job! 😎

@Starflyer1609 2 года назад

sittin here...printing with 60 mm/min... watch your videos.... i think its a tear running down my face, but i smile 😂😂

@timohaX 5 месяцев назад

Lol idk I got 300mm/s on my ender 3 v2 neo without any kinematic upgrades, EVEN with extruder on the printhead itself. I also use pro firmware

@ifrite3 3 месяца назад

@@timohaX what is pro firmware

@timohaX 3 месяца назад

@@ifrite3 mriscoc's professional firmware for creality ender 3d printers, you can find tutorials on youtube

@FilamentStories 2 года назад

Absolutely fabulous! Love the laughing, it made the video even more fun!

@MAJ_T_Bagger 2 года назад

I feel like I've picked the right time to get into this hobby haha. Absolutely insane man, was in hysterics the first time it ramped up

@Mehecanogeesir 2 года назад

You truly have. You've missed the struggles of ramps 1.4, Marlin, 20 mm/s outer perimeter max speed @ 500mm/s^2 accel, no filament runout sensors, no input shaping, no pressure advance, lack of enclosures, V6 hotend non-rigid mount, V6 hotend nozzle changing horrors, V6 hotend heatbreak shenanigans, V-slot extrusions, no flex plate, no extrusion backers, no bed kinematics, no kits, extremely small communities, silly slicers, and the list goes on. Funny thing is, I still look back on all that as good times with a new technology. Even my first $200 chinese i3 printer that I never assembled correctly and never got a good print out of.

@labemolon5739 2 года назад

I’ve watched this over 15 times now. I absolutely love how far you’re pushing it! Could you please post a video of it printing something in vase mode 🙏 I’d love to see it spinning around and forming a cylinder!

@FiglioBastardo 2 года назад

That would be super cool!

@DeadNoob451 Год назад

This 100% deserves the name "ludicrous". Insanely fast. Amazing build.

@MeKnownAsI 2 года назад

You laughing the whole time was great. I had a huge grin on my face the whole time watching it move so fast. Beautiful.

@RudeElephants 2 года назад

Whoa! I've enjoyed watching this build series and this print was the cherry on top. Absolutely awesome!

@labemolon5739 2 года назад

This was so f*cking radical, I couldn’t stop laughing at how fast it prints! Top notch work mate!

@nickbaddorf2673 2 года назад

Amazing as always! Thanks for revolutionizing 3D printing!

@hightech-lowlife 2 года назад

Also adds its own industrial soundtrack while it's printing, what a great feature 👍

@dylaneagles9850 Год назад

2:20 Dang that's really fast. 3:20 HOLY MOTHER OF GOD!

@ericlotze7724 2 года назад

Can we get a #SpeadBoatRace (ie speedbecnchy) at ludicrous speed next? (If you can spare the filament lol) We may have a new record holder! (Edit: Typos)

@haenselundgretel654 2 года назад

THIS really is the forefront of high speed printing!

@carljorgensen8543 2 года назад

I would love to see some close up slow motion footage at those print speeds

@drew899 2 года назад

I don’t know if it would look any different than a slow speed printer 😂😂

@carljorgensen8543 2 года назад

@@drew899 probably not haha 😂

@Nobody-Nowhere 2 года назад

You can just reduce microstepping so the board can keep it up. And gain some extra torque at the same time. Klipper crashes if you try to do too fast movements with too high microsteppings, says MCU timing issues. But its simply about trying to generate too many steps, and dropping microstepping halves the necessary steps that are generated.

@Vez3D 2 года назад

Yeah i dropped to 16 for this vid.

@simontanguay3619 2 года назад

Is it a limitation related to the Pi computing power? Or is it tied to the mainboard itself?

@3dexperiments 2 года назад

@@simontanguay3619 Good question. Also wondering if the Mainsail would benefit from running on 64-bit OS instead of 32-bit?

@seanseago699 Год назад

Here I am frustrated with how long it takes my Ultimaker S5 to print...anything. I thought "Today is the day. I'm going to build a hevORT" Did my usual due diligence and found there are simpler options that get the job done. Then I find this which uses the frame of a printer I've already got collecting dust in the garage. "This is the one." Thank you so much for sharing. Never forget where you come from, always chase the horizon.

@VladOnEarth 2 года назад

INSANE!!! :))) The mechanics of that printer and stability of that linear motion is truly impressive! Its not shaking, but the house outside probably is!! LOL

@Vez3D 2 года назад

Not at all..its bolted to house concrete foundation :)

@rockskyred549 2 года назад

@@Vez3D so now we need a house foundation as well with our printers :)

@ajo.5476 2 года назад

I couldn’t stop watching. Absolutely mesmerising. So when are you going to give us the run down of everything in this build?Wow!!

@silverraider2688 Год назад

Damn, you my friend are pushing this industry forward !!! Thanks for the show !!

@olafmarzocchi6194 2 года назад

It would be interesting to see the recommended accelerations as provided by Klipper input shaper script, the one with different values of smoothing depending on the input shaper algorithm chosen. Thanks!

@strictnonconformist7369 2 года назад

@VezED I watched the first layer print, thought… mex….. The second layer, it looked and sounded like it’d gone nuts, but the quality looked good, I broke out laughing! And finally at 1500 mm/s you finally hit a limit of some sort, guessed to be processing. In a world where most home 3D printers are still running cheapskate 8-bit microcomtrollers, you may have maxed out a 32-bit microcontroller but still had mechanical capacity leftover 🤣🤣🤣

@strictnonconformist7369 2 года назад

@@autogyro333 can’t say I’m not intrigued, but perhaps I may conclude it’s inadequate and refuse, because I assess it needs to be 64-bit ;) But in reality, there are contexts where going 64-bit makes more sense than 32-bit, but it’s actually unlikely to be of benefit for this context: 64-bit code tends to need more memory bandwidth and larger cache, both things you’ll often not get in a microcontroller type of environment. Having more CPU registers is possibly a valid reason, but that’s not a function of being 32 or 64-bit explicitly in the general sense, but a matter of the ISA and its implementation combined with how well the compiler optimizes their use. I could also do the most bizarre thing in funding to live up to my moniker: mail you a penny, which of course has no real value😜

@chrome4096 Год назад

dude been dreaming of this since the voron2 announcement!! i guess i can start building now, +thanks 4 for your work and sharing

@nicosasupreme7767 Год назад

The BRRR sound from the printer is the most satisfying one I’ve heard!

@imst4722 2 года назад

Never thought I'd see you max out the mainboard. My stock tronxy steppers definitely aren't going to get there 😂

@Hojadurdy 2 года назад

During first layer I was like “wait this is 1500mm/s. Pffffft…” . And then the second layer starts. Printer be like “BRRRRRRRRRRRTATATATATATATATATTABRRRRRRRRRRRRTATATATATATATTABRRRRR” 😂😂😂. Amazing printer. Awesome work. *inserts Tony Stark gif* “I WANT ONE”

@ed3dcreations386 2 года назад

Hell yeah!! This is awesome!! Nice work!!

@nanastos18060 2 года назад

Keep up the stupid things, lol LOVE watching your videos All of them!! Your AMAZING!!! Keep up the awesome work!

@donjohnson7746 Год назад

I jumped in here I missed the buld but I will be watching them later. Just impressed 👌

@smokehead5318 2 года назад

You are crazy, man! Just crazy. Keep it up, and don't go slower. Cheers

@OficinadoArthur 2 года назад

Jez... That's Quick... Amazing project!

@GaryScottPhotographer Год назад

You clever, clever man. I'm not even brave enough to install Klipper. That completely blew me away.

@masimplo 2 года назад

Goes on to print first layer at 150mm/s considering it normal speed :| Amazing video, you have really pushed the boundaries of 3d printing speed.

@djjokerjaxx 2 года назад

What you think of the bambulab with its active vibration cancelation you think is better than the one of klipper ? Maybe an improvement in that could help to get even better result at high speed printer acheive some really good quality in an under 20min benchy

@Vez3D 2 года назад

I dont know. I dont have a bambu printer :p i was not offered one haha

@highspeedpiTV 2 года назад

Input shaper for klipper does the same thing. You can get same results with proper tuning, no Bambu needed lol.

@djjokerjaxx 2 года назад

@@highspeedpiTV but bambu lab first messure vibration by lettinging it shake doesnt that do any good ? I am trying to figure out why everyone is saying that the other manufactures cant keep up when basically bambu lab just put all the avaiible feature from the open source market in their printer 😅 would be intressting to see bambu lab vs vez bot

@subjektivegaming 16 дней назад

Pretty soon people will start making slow-mo videos of their prints instead of time-lapse :) That is just mental broooo!!

@Defyant123 2 года назад

My wife just dosn't understand why this is just soooo cool to watch !

@highspeedpiTV 2 года назад

Totally amazing! Keep up this great work bro! I need me a Vz235 AWD

@lavafree 2 года назад

Really impressive, congratulations 👏🏻👏🏻

@SplitPhotography 2 года назад

Thinking about it, it's also pretty awsome how fast all that data can be processed. Would be cool to see the gcode processed live while printing 😅

@Aaku13 2 года назад

oh man computers are super fast nowadays. I'm a software engineer by trade and I wrote a program recently that can process ~9000 large files a second. It's insane how fast that is. To give you an idea, that's about ~3600 files in the time it takes you to blink.

@SuperUltimateLP 11 месяцев назад

@Aaku13 even just a phone in your pocket can run at 3 million cycles a second... It's truly a ridiculous time to be alive...

@SplitPhotography 11 месяцев назад

@@SuperUltimateLP dang yeah. Can't helt wondering where we are in 100 years 🤩

@pmhking84 Год назад

this is way faster than my expectation... two thumbs up

@DMonZ1988 2 года назад

WOAH! it looks and sounds so good!

@haenselundgretel654 2 года назад

I'd love to see CNCkitchen make material tests with your 3D printed parts and tell us what strength differences there are when changing speed and/or acceleration. This would be the ultimate proof of your printers capabilities in terms of usability of the parts.

@Vez3D 2 года назад

I dont print a usable part at that speed...but with 200-300mms i have.not seen parts being weaker. You print hotter a bit and hop

@haenselundgretel654 2 года назад

@@Vez3D how about contacting CNCkitchen and make him test some parts? Would be awesome! He's pretty open to new suggestions.

@thenextlayer 9 месяцев назад

This is the craziest thing I've seen in 3D printing... Trying to avoid the temptation to build one...

@everettebinger5956 2 года назад

Just absolutely insane!! Truly pushing the limits and industry sir!

@johnc7753 2 года назад

My wallet jumped of the table and threw itself at the screen.

@RickyWood1981 Год назад

Insane!! I had to show my wife so she understands why I'm starting this project lol

@Kady3DPrinting 2 года назад

The magic behind corexy

@BrianMaynardLetsDoThisThing Год назад

This is crazy. Can’t wait to finish my build

@mjetdevelopment 2 года назад

Crazy fantastic. My favourite printer on youtube, and the one I will build if I find time to.

@JonS 2 года назад

Absolutely amazing! The Pantheon guys go back to the drawing board 😀

@ARODFX Год назад

Absolutely Ludicrous Speed! It make me Giddy as well...

@mikestewart4752 2 года назад

Dude!!! You’re gonna need to grease your spool holder bearings!!! Lolol. That’s amazing.

@mhgscrubadub9917 2 года назад

always killing it as usual king

@berberger4814 Год назад

10:20 the screen starts to say no, but the printer is like: push me

@kalashin1529 2 года назад

this is totally crazy!!! NICE ONE! i love watching it so much :D Awesome!

@DoctorrMetal 2 года назад

holy.. even the warmup/firstlayers was insane

@SzymonSays1 2 года назад

Epic. Simply Epic.

@erenbilir2828 2 года назад

Meanwhile neighbors thinking it's a earthquake

@Vez3D 2 года назад

no neighbords here.. well.. there are but couple hundred feets away.

@AuthenTech 2 года назад

Soo cool man! I want one

@El_Dr_Tacco Год назад

Dudeeeee this is like watching one of those Michael Bay transformers movies... Unbelievable 🤯

@forbiddenera 2 года назад

So awesome. This makes me giddy and laughy too.

@AndrewAHayes 2 года назад

That is insane! I have to get an LSD hotend when they are released, my car registration plate is LSD by the way LOL

@christophstrasser4190 2 года назад

This made me laugh of joy so hard 🤣 amazing, thanks !

@satina1169 3 месяца назад

i wonder how much it would realign the bones in my hand if I was attempting to grab it while moving

@grathado28 Год назад

bro I was laughing manically with you 😅😅

@StackingLayers 2 года назад

Thanks I hit my chin on the table watching this! 😲 That was unbelievable!

@DimensionMachine 2 года назад

Abosuletly amazing. Beautiful setup, nice job.

@Gondola_ Год назад

Impressive bed adhesion too!

@Dave-wv9vc 2 года назад

Awesome speed dude. Can't wait for Mirage C to finish testing your hotend! You are planning on releasing it...right?

@Mecatronicgarage 2 года назад

this is amazing, I've never seen anything like it

@vasilissimonis3479 Год назад

Damn!!! I am laughing and crying at the same time!

@rolandhansmann6089 11 месяцев назад

OMFG! 3:15 watch this thing almost lifting off the orbit! My chin just smashed the table when it went off

@mintrekii Год назад

The little printer who could

@michelbrasseur9296 2 года назад

it's so stupidly fast that it makes you smile

@kwad3d10 4 месяца назад

Hi, My Goliath hot end arrived today. Very impressed with it. I noticed some of your videos with the goliath air don't have a cooling fan on the hot end. Is it not needed for a printer that is not enclosed?

@Vez3D 4 месяца назад

Its needed. You could get away without a fan but you have to be careful and know what you are doing. Like never leave the heat on if no plastic is printing.

@Daniel-qr2cy Год назад

I wish I could get my Creality Sermoon D1 to print even a quater of this speed. WOW

@ColinMacKenzieRobots 2 года назад

wow! fun! Almost as fast as a hollywood movie now

@Nick_4576 Год назад

This is AMAZING! **repeatedly smacks credit card on the desk**

@alttabby3633 2 года назад

Crazy fast, very awesome my dude!

@hokoon 2 года назад

how many point you anchors the wall to get this stable? I'm currently modifying my Ender6 installing the Vz330 gantry and Z. hoping for 8min benchy.

@Vez3D 2 года назад

Just 2 in the back..to concrete house foundation

@markthompson5983 2 года назад

My massive bed slinger managed a 6:48, I bet you'll go a bit faster than 8 minutes.

@hokoon 2 года назад

@@Vez3D only 2 along Y axis? make sense, thats where the heaviest part move.

@ricardorodrigues777 Год назад

This is insane 😂 Muito louco isso , meu irmão 😝

@shapshooter7769 Год назад

Huh, this machine moves almost as fast as I colour books. And that's within the lines, mind you 😂

@michits1118 8 месяцев назад

The moment the vz died, sounded so brutal

@Vez3D 8 месяцев назад

It never died :p

@michits1118 8 месяцев назад

@@Vez3D i meant the moment it reached the hardware limit.

@siegesouth Год назад

3:20 bruh it scared me how fast that accelerated lol

@OEspecialista Год назад

what were the improvements you made to reach that speed??

@PhilippensTube Год назад

This makes me laugh out loud too. Really ludricous! Great job! But now you've done it...I want one. But this ludricous speed is obviously not something you can use all the time. This print is suited for this speed, but what would you say is 'usable' speed at which you're still fast(est) and print with quality? Could you show a bit more complex print? Doesn't have to be a benchy, but something with detail, overhang, whatever. I imagine that this printer is capable of a lot.

@SinedWOLF 2 года назад

*Slowmo Guys, you need film this insane machine!!!*

@FiglioBastardo 2 года назад

Ok I thought the 400mm/s bozzle nozzle short video was fast but I stand absolutely corrected! This is plaid with ludicrous and a sprinkling of holy shit-balls Batman added.

@sparkyondub2z 2 года назад

I had to go hide behind a wall

@MakerBees333 2 года назад

😕 looking up from the video at my off-the-shelf basic printer ‘🤬 why are you so slow!’ What is it waiting for? Christmas!?!

@Vez3D 2 года назад

Haha

@ronsone8373 2 года назад

Yo LDO!? Are watching this? Where are the vz235 kits at 😜

@TheSohckid Год назад

That is impressive

@etimon1d 2 года назад

It is not stupid. It is awesome!

@fastfood122 6 месяцев назад

Hi vz!!! How u r getting a perfect first layer ? i have the vzbot kit but i can't get it to work it work for cuple of prints and then give me hard time im using bltuch aswell and the bed never straight what ever i do ....do i have to take off the magnatic sheet as I think it is cousin the bed to worp and I'm not sure if u r using magnatic sheet as i can't see if u r using it....?

@WaarpZor 2 года назад

This is insane 😲

@first-thoughtgiver-of-will2456 2 года назад

Raspberry pi pico with PIO driving MOSFET h bridges might let you achieve faster signaling speeds. Thanks great work stop saying this is stupid it's very impressive!