Тёмный

Fencedogs 👍👍👍 [ 

Peter Millard
Подписаться 261 тыс.
Просмотров 98 тыс.
50% 1

Hi Everyone.In this video I take a look at brilliant and deceptively simple FenceDogs. Enjoy!
***
Support the channel and receive a 5% discount across the board at Benchdogs (link below) by using the offer code “10minuteworkshop” at checkout.
bit.ly/bench-dogs
***
Please use the ‘Like’ button if you liked this video.
Please subscribe if you think you’d like to see more.
Support me directly on Patreon - / 10minuteworkshop
Connect with me on twitter @10minuteshop
Connect with me on Instagram - 10minuteworkshop
As an Amazon Associate, I earn from qualifying purchases made through these links.
Wherever possible links are to actual products used, but this is not always possible e.g. some products are not available in the US, so something similar has been linked to instead.
Amazon UK - www.amazon.co....
As an eBay Partner Network member, I earn from qualifying purchases made through these links.
eBay UK - bit.ly/Buy_eBay_UK
Used/featured in this video:-
FenceDogs - bit.ly/bench-dogs
V-Slot Rail - bit.ly/V-slot
Other widely used items:-
Festool CTL Sys - amzn.to/2sKa2t3 (US: amzn.to/2tCvVdZ)
Scheppach HD2P - amzn.to/2nniVa6 (US: sorry - not readily available at sensible money, also only 240v)
Aldi Workzone vac - bit.ly/AldiVac
Braided hose sleeve - amzn.to/2puFkWd (US:amzn.to/2oqbQsi)
Moldex 6810 in-ear defenders - amzn.to/2sTwQJE (US:amzn.to/2sThGo1)
Festool RTS 400 - amzn.to/2x6zGZW (US: amzn.to/2i84yXn)
Mitre Fast - amzn.to/2v8dlfl (US: amzn.to/2LQsJEc)
Titan bandsaw - bit.ly/TitanBan...
Hand-sanding backing pad as featured in ‘Sanding Tips’ video #028 • Sanding tips #028
Junckers strong - bit.ly/Junckers...
Foam rollers - amzn.to/2mS7BT7 (US: amzn.to/2LyLArt)
Mirka Abralon - amzn.to/2v07kCc (US: amzn.to/2K7su5W)
Silicon spray - amzn.to/2LMOg3H (US: amzn.to/2Ao14t4)
Trend Air Stealth Facemask - amzn.to/2zah0P6
3M 4277 - amzn.to/2MOe9x8 (US [4251] amzn.to/2K7R32L)
Air quality monitor - bit.ly/Air_monitor
Festool TS55 Tracksaw - amzn.to/2pGvzDS (US: amzn.to/2oOgGhw)
Festool PDC 18/4 - amzn.to/2s3J0eq (US: amzn.to/2tWUHEL)
Festool Midi extractor - amzn.to/2tCIN3Q (US: amzn.to/2rKNIOx)
Festool Domino - amzn.to/2pVSnMk (US: amzn.to/2o7E22Q)
Festool Domino assortment - amzn.to/2piZjHa (US: amzn.to/2pGv1Lx)
Festool Domino 5 x 30mm - amzn.to/2oTq5CZ (US: amzn.to/2oOqyrL)
Festool ETS 150/5 - amzn.to/2sapsq9 (US: amzn.to/2ssbZgq)
Festool lever clamp - amzn.to/2pOohLD (US: amzn.to/2pnFZIM)
Axminster trade clamp - goo.gl/6m9VUh
Hot glue gun - amzn.to/2u2CF8s (US: amzn.to/2u2cgYc)
Silicone brush set - amzn.to/2guo6Sm (US: amzn.to/2yEWbZI)
Silicone brush (single) - amzn.to/2l5rNTD (US: amzn.to/2zqFaQl)
Polyvine PolyTen PVA - amzn.to/2svT03N (US: amzn.to/2rmHYL3)
Photo/video gear
Main camera Panasonic Lumix G80 - amzn.to/2o7uPrx (US - G85: amzn.to/2ouTwJV)
Olympus 12-40 f/2.8 - amzn.to/2sz34Xy (US: amzn.to/2sbYkte)
Second camera Panasonic Lumix G6 - amzn.to/2v3qOFQ
Third camera Panasonic FZ200 - amzn.to/2pj8p6Z (US: amzn.to/2oYSGJ0)
Rode Videomic Pro - amzn.to/2oTAr5W (US: amzn.to/2oOp54A)
Sure Beta 58A xlr voiceover mic - amzn.to/2AoJDIF (US: amzn.to/2v2FuFj)
Audio recorder/interface, Zoom H6 - amzn.to/2Ot8yhq (US: amzn.to/2K7io4U)
Samson Q2U USB mic amzn.to/2NVArNP (US: [Audio Technica ATR2100] amzn.to/2K8krpw)

Опубликовано:

 

12 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 362   
@DeanneMariaCreates
@DeanneMariaCreates 6 лет назад
Great Peter! Anything which aids the cutting and ripping of wood is a bonus to me!
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Thanks Deanne! 👍👍
@johnmontague69
@johnmontague69 6 лет назад
You can never have enough glides and slides for tools. Nice video Peter, Excellent idea.
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Cheers Monty! 👍👍
@jimblack2331
@jimblack2331 6 лет назад
A straightforward solution to an everyday problem! Thanks Peter.
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Cheers Jim! 👍👍
@garybarchas4984
@garybarchas4984 6 лет назад
Brilliant! I can't tell you how many screw holes were in my old benchtops ! Had to constantly replace or re-face them. I've since gone mobile and will be ordering those items if available in the US. Thanks again Peter! You're the best!
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Cheers Gary. Both companies will ship internationally, so you shouldn’t have a problem 👍👍
@howardbecdove9780
@howardbecdove9780 6 лет назад
I’m listening with one finger in my ear and watching with the other hand covering one eye whilst chanting the mantra “ I don’t need any more tools” and reassuring myself that that stuff wouldn’t be available outside Britain. Then you had to go and say that “they ship internationally” 😩
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Sorry - maybe these vids should come with a safe word?? 😂👍👍
@jakefallon2335
@jakefallon2335 6 лет назад
A wallet warning would be cool. At least the dust extractor was sold out by the time I'd seen your video. lol
@stephenshipley1066
@stephenshipley1066 6 лет назад
Speaking of "they ship internationally" I have only just noticed that Axminster Tools have followed Screwfix in offering FREE EU-wide shipping for all orders over 100 euros.
@ezza88ster
@ezza88ster 6 лет назад
Yup! I'm suffering from the same complaint. And why do they have to make aluminium extrusions so damn 'sexy'? Can't they make them ugly or something?!
@mikes6844
@mikes6844 6 лет назад
Stop arrived today and I’ve managed to use it and for the price it’s great. Needs a little silicon spray to free the movement a little but I’m chuffed. I use a Makita track and saw and I need to get the track cut a little shorter to use on top of my MFT more comfortably , so I’ll be looking to get it laser cut. Bench dogs do a good job in holding everything thing square but it’s no Festool hinged job. There’s another after market opportunity for someone 🤪👍🏻👍🏻
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
I’m working on it Mike! My flagstops arrived yesterday, video out on Tuesday 👍👍
@mgdew
@mgdew 5 лет назад
this is what I was thinking too, maybe side hinge system for track that runs off the back of the extrusion, creating a similar flip up and down square set for the rail and extrusion like Peter has on his older MFT bench.
@steenfraosterbro3268
@steenfraosterbro3268 6 лет назад
You just made me buy £ 100+ of tools. Thanks a lot Peter!
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Now, now - I just made you *want* to buy £100’s worth of tools. Subtle difference 😆😂👍
@steenfraosterbro3268
@steenfraosterbro3268 6 лет назад
I'm going with my first comment when the wife asks.😉
@SMee67
@SMee67 6 лет назад
What a brilliant addition👌 Cheers for sharing that little gem, mate👍
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Thanks Bill! 👍👍
@simon-d-m
@simon-d-m 6 лет назад
I switched to a similar but taller extrusion for my router table fence a couple of years ago. I can't believe I struggled for so long with the silly split fence it came with. Tall fence needed? Bolt on an auxiliary fence (I use Buffalo board, slippery side to the workpiece). You're dead right about how useful it is, especially with sliding stops, and you could even use a scale, indexed against the back edge of the saw's own rail. That's a brilliantly useful video - many thanks Peter (off to the e-shops for me, I think!).
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Thanks! Yes, they’re handy to have around 👍👍
@LeeRobertsMe
@LeeRobertsMe 6 лет назад
KJN Aluminium Profile in the UK are a very good price for extrusion, great service too 👍
@duncanhurst2888
@duncanhurst2888 6 лет назад
Brilliant again Peter! Just what I need and at a price I can afford. Thank you.
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Glad to hear it! And thanks! 👍👍
@lwinaus8810
@lwinaus8810 4 года назад
Thanks. Building a new workbench and love this idea... so I ordered a set from Benchdogs. Here in Australia the 1 meter 2040 extrusion was $18... so a great idea at a reasonable price.
@10MinuteWorkshop
@10MinuteWorkshop 4 года назад
Thanks, glad to hear it helped! 👍
@EscapeMCP
@EscapeMCP 6 лет назад
I'm buying some of these. Thanks Peter.
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Glad to hear - they’re a great product 👍👍
@HyperactiveNeuron
@HyperactiveNeuron 4 года назад
Wow that's awesome. I never thought of that. Here in the US one of the main distributors of aluminum profiles is a company called 80/20 Inc. I have a 25x75 profile made by them which gives me 3 t-slots on the 75 mm side. I use it for a fence for my drill press as well as a router sub fence which gives me tons of options for mdf sacrificial fences as tall as I want them to be or lay it flat on the drill press and I have better control of small pieces and more clamping options. I also bought two 36 inch long profiles that for the slots so I can cut them to custom sizes as I need them. Amazing products and now I see even more use. I need to order a 6 or 8 foot long profile for my table
@10MinuteWorkshop
@10MinuteWorkshop 4 года назад
Thanks! Yes, unfortunately 80/20 isn’t widely available over here - I know it was very popular with US Festool fans back when they made the original MFT1080, as the profile was the same, and huge MFT tops were relatively easy to make at a great saving on the Festool prices! 👍👍
@johnbarlow6546
@johnbarlow6546 6 лет назад
Thanks Peter for an excellent vidéo. Just recently made an MFT top to fit a Kreg bench. Just what I needed for using with my Festool TS55. Order delivered from Bench Dogs today. Keep up the excellent presentations
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Thanks John! Benchdogs are great 👍👍
@stingly142
@stingly142 6 лет назад
What a brilliant idea. Added these to my wish list!
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Thanks! They are really clever, and very nicely made 👍👍
@mgdew
@mgdew 5 лет назад
i've just bought my extrusion and bench dog fence dogs, along with the bench dog fence stop in metal v3 version :) - I am intending on using some adhesive rule along the centre section of extrusion. I am going to use the bench dog rail dogs in my rail so its straight across the table, then but the extrusion right upto the back of the rail, essentially creating a square. If I measure from the cut rail strip to the beginning of the fence, I can put my adhesive rule on accordingly so with a fence stop set on the rule should be able to create repeatable square cuts time after time :) - thanks for doing this video Peter, otherwise I would never have come up with how I could do this over and over again in my mobile setup (trestles !) with self made MFT slab.
@10MinuteWorkshop
@10MinuteWorkshop 5 лет назад
Sounds great! 👍👍
@NeilDunlop
@NeilDunlop 6 лет назад
Such a simple yet effective design. If you swap out the M6 bolts for some M4x30 ones and use the smaller bolts from the MFS set you can use them to secure the MFS router template thing very easily too. Best to use the M8 knobs to secure them from underneath though (to stop the MFS from tipping).
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Great idea Neil - hadn’t thought of that! 👍👍
@markrowland5393
@markrowland5393 6 лет назад
Very clever. Thanks, Peter.
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Cheers Mark! 👍
@onlyme7939
@onlyme7939 6 лет назад
Great idea and thanks for doing the leg work in suppliers, look forward to the bench video
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Thanks! 👍👍
@awayinwonderland3177
@awayinwonderland3177 6 лет назад
Seems like a perfect idea to use for a mitre saw station fence with stops etc! Thanks for sharing this Peter ;)
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Yep, they’d do that nicely 👍👍
@henrikbakheyde
@henrikbakheyde 6 лет назад
Peter, you just keep coming up with very good ideas indeed - within everybody's budget. I suppose that's why we are watching week after week. Cheers mate!
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Thanks Henrik! 👍👍
@kevinsussex3039
@kevinsussex3039 4 года назад
Just had my table delivered and saw this. Genius. I have been watching your excellent videos for 18 months or so. Just had to comment today to say Thank you! Ordered from benchdogs the fence dogs, the flag stop, some m6 nuts, then over to ooznest for the extrusion. Now just need to work on a hinged track (i’m cheap and only bought an mft table - non festool!). Best wishes.
@10MinuteWorkshop
@10MinuteWorkshop 4 года назад
Kevin Sussex Nice! 👌 If I was starting afresh, I’d do the same! 👍👍
@ooznest
@ooznest 6 лет назад
Excellent video, such an inventive usage of our extrusion! If anyone has any questions about our extrusions feel free to ask us.
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Thanks! Glad to have you here - I’d only be referring question to your website anyway (link in the description) 👍👍
@worzelbxoy3565
@worzelbxoy3565 6 лет назад
Ooznest are you In Brentwood Essex by any chance????
@ooznest
@ooznest 6 лет назад
Yup were based there. Welcome to order online and collect. Or just come down and see what we do.
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
On my way... 😂👍
@WaschyNumber1
@WaschyNumber1 6 лет назад
Hello, how tough is the black coloured version of the v-rails?
@danielhomolka9459
@danielhomolka9459 10 месяцев назад
Funny, I just decided to go the opposite way: getting the original fence from Benchdogs and save my money with 3D printed fence dogs 😀 I preferred the original fence over a std profile due to the overall package - €20 for a 2040 profile with one chamber closed (for the scale) - €10 for a stick-on measurement scale - €15 for a stop to use with the profile That is €45 vs what Benchdogs is asking for (< € 60 atm); assuming their laser scale is more accurate and will last longer than the stick-on solution. That is why I supported their business. The 3d printed fence dogs may come in with 2x 3 Euro for material plus 2x 2 Euro for screws and nuts. Not too bad isn't it? Given I had to spend €29 on their solution I decided to go cheap with these
@tworiversworkshop6111
@tworiversworkshop6111 2 года назад
Great idea Peter, thanks for the heads up!
@malcolmpoole9993
@malcolmpoole9993 6 лет назад
Portable bench huh! 😜 Timothy wilmot (Benchmarx) did a good mobile bench. Yes I been looking at those fence dogs for a while now. Thanks for the video
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Yeah, Tim’s bench is great, but totally unsuited to the properties I work in - it won’t go round the corners! 👍👍
@couplandsj
@couplandsj 6 лет назад
You mean you cant get this one round the houses you work in..! benchworks.be/en/projects/mf-tc-multifunction-tool-cart/ You must be in the "Borrowers" houses..;-)
@iangrindey
@iangrindey 6 лет назад
This is an awesome find, Peter. I even like their own rail, especially as it comes with tape and a stop. Although a couple of flip-stops would be better. Let me know when you've found them as well 😂
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Haha - I think I might have to make or adapt the flag stops. Working on it though... 👍👍
@iangrindey
@iangrindey 6 лет назад
See, you've now gone all Festool on us again with this 'flag stops' business. Stop it. Think cheap. lol
@mikes6844
@mikes6844 6 лет назад
Thanks Peter all ordered 😎
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Excellent! 👍👍
@clarkfinlay78
@clarkfinlay78 6 лет назад
Excellent video as ever, expecting to see a follow-up video to this with DIY stops for this fence
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
They come with the portable bench - ‘always leave ‘em wanting more...’ 😆👍👍
@workahol
@workahol 6 лет назад
Brilliant - I've been trying to solve this exact problem for my own bench, and a pair of these will be much simpler than any sort of bracketry I'd fabricate myself. I hope they give you a commission on my order!
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Haha, sadly no - at least, not yet 🤔👍
@l1verm0m
@l1verm0m 6 лет назад
Hi Peter... another good one - just placed my order through your link. As others have said ..’just when I thought I had everything I need !!.....’. For reference I have an mft3 and the axi part kit, which I have found to be very accurate and it allows you to configure exactly where you want your 20mm holes. Having almost completed my mobile base for the mft this came at exactly the right time. If you would like I’ll send some pics when I’ve finished the sustainer slides and the draws...
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Thanks Mike! And yes, I’d love to see some pictures when it’s all done 👍👍
@mathewgallimore1484
@mathewgallimore1484 4 года назад
Great ideas, simple and useful and Always helpful. Sharing your experience and knowledge is really appreciated.
@ZenMinus
@ZenMinus 6 лет назад
Thank you Peter for showing these. I am already familiar with the extrusions by another brand name. I *DO* like the bench dogs. It looks like I'll be powering up the lathe and milling machine on the weekend :-) Regards Peter (Sanders)
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Pleasure! 👍👍
@peterevans3809
@peterevans3809 6 лет назад
Suddenly I need to do some online shopping!
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
That happens - every Friday and Tuesday 🤔😂👍👍
@alasdairmackenzie515
@alasdairmackenzie515 6 лет назад
Excellent! Thank you so much for sharing this. Best aye!
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Thanks! 👍
@Binny2020
@Binny2020 6 лет назад
Hi Peter, extrusion arrived today, amazed at the quality for the price - first rate. Should be getting the Fence Dogs tomorrow and off i go with the build. No worries regarding the Steel legs, i'm sure i will find a use for them. Does make me more intrigued regarding your build - my previous iteration was slot together ply, worked for a while until the middle started to sag.
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Thanks Andrew! Yes, it’s really nice quality ally, very pleased with mine. 👍👍
@davidgill1716
@davidgill1716 6 лет назад
Hi Peter. Great video again, I'm definitely going to invest in some of these. It might be worth mentioning that you can also get Cnc cut replacement mdf tops for the MFT of ebay for £40. People can then build there own MFT style work benches. Keep up the good work.
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Thanks Dave. Yes, I get into that with the bench build - seen them as low as £30...👍👍
@davidgill1716
@davidgill1716 6 лет назад
@@10MinuteWorkshop shouldn't have second guessed you😅 look forward to the video. By the way, I made my first Millard style shaker doors for an alcove unit I instslled Last week. Also had the panels drying on my Millard style drying rack. I'm starting to feel like your apprentice 😂
@lasercut.london549
@lasercut.london549 6 лет назад
Amazing! I have been having issues today with my MFT3 as I forgot the small blue fence support and I never realised how flexible it was without it... 4 clamps later and I'm double checking every cut! So Just places an order for the fence dogs, rail dogs and a set of bench dogs. Will make moving the mft table. About much more simple now.
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Timing is everything 😆👍👍
@lasercut.london549
@lasercut.london549 6 лет назад
I have been watching your videos foe so long now, and super grateful for all the knowledge your sharing! I'm building some alcoves at home as I type
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Glad they help! 👍👍
@mikeking7470
@mikeking7470 3 года назад
I do like your channel, 10 minutes is about my attention span! I had a video in my feed this morning, 1.5 hours to make a face frame (good Lord!). Your fence looks like the stuff we just call 40/20 here in the USA.
@10MinuteWorkshop
@10MinuteWorkshop 3 года назад
Thanks! I think 40/20 and 80/20 is a straight section extrusion - this is v-slot - but very similar. 👍👍
@Binny2020
@Binny2020 6 лет назад
Thanks Pete, just ordered the extrusion, fence dogs next !
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Lovely! 👍👍
@ManorWood
@ManorWood 6 лет назад
Great find Peter..
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Thanks! 👍👍
@rudiruesay
@rudiruesay 5 лет назад
Hello Peter, as usual a very, very useful video. I wasted no time with you again. Thanks for the 10 minutes! Greetings from Bremen, Germany.
@10MinuteWorkshop
@10MinuteWorkshop 5 лет назад
Thanks Rudi! 👍👍
@resultcarpentry5869
@resultcarpentry5869 6 лет назад
You’re my new best Mate Peter - genius 👌🏼🤗
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
😆👍👍
@johnfithian-franks8276
@johnfithian-franks8276 6 лет назад
Nifty little things thanks for sharing
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Thanks! 👍
@EddyCarroll
@EddyCarroll 6 лет назад
Really simple and useful Peter - thanks! I’ll definitely invest in this since I’m about to add some holes to my bench top. As always, the helpful links in the description help lift your videos well above the others and are much appreciated!
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Thanks Eddy! And there’s always room for more holes in the bench 😆👍
@rakeyohn222
@rakeyohn222 6 лет назад
Interesting find. Thanks for the tips.
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Pleasure, thanks for watching 👍👍
@ztiling5646
@ztiling5646 5 лет назад
Thanks for that great idea,really I need that.
@beregu
@beregu 2 года назад
Thanks for the review. Just made my order with 5% discount using the code in the description.
@mikes6844
@mikes6844 6 лет назад
All the bits arrived, I can now use my UJK Multifunction bench from Axminster Tools along the lines I’d hoped for. Next step looking for a Stop I can use/adapt. Progress 👍🏻👍🏻👍🏻
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Excellent news Mike! Also tinkering with flag stops- let me now how you get on! 👍👍
@kookyflukes9749
@kookyflukes9749 6 лет назад
Nice simple idea. Totally repeatable square cuts. Pity I don't make square stuff because these would be a must have.
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
👍👍
@kevinsteer7920
@kevinsteer7920 6 лет назад
Best tip I’ve seen 👍👏👏👏
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
What, ever?? 😆👍 Thanks Kevin! 👍👍
@SometimeWoodworker
@SometimeWoodworker 6 лет назад
Thanks for the information, you seem to be causing quite a few people to spend their hard earned money. :) I'm just one of them. Josh from Oozonest said "It's great to see you have come from Peters video, he seems to have made us very popular since yesterday!"
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Haha - I think I’m just making them *want* to buy 😂 Apparently the FenceDogs guy ran out of aluminium, had to buy some from ooznest... 🤔😆👍👍
@SometimeWoodworker
@SometimeWoodworker 6 лет назад
I'm also buying from him too. Do keep finding stuff to make me spend money ;)
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Working on it... 😆👍
@Binny2020
@Binny2020 6 лет назад
Hi Peter, will be very interested to see your take on a mobile work bench. I'm currently constructing one based on Dan Pattisons idea of it packing away into itself. Managed to get some tubular steel legs, already have the holy top!, just awaiting delivery of the dogs and extrusion (thanks to you). By the by, i have some steel legs left over if you are interested FOC. Thanks again for the suggestions and keep up the good work.
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Hi Andrew! Sounds like a great project, and glad to hear you were able to pick up some extrusion - they’ve been pretty busy over there! Appreciate the offer of the legs, but not what I’m planning for my bench, thanks - save them for another project of your own! 👍👍
@derekwilliamson5442
@derekwilliamson5442 2 года назад
Great idea Peter
@Binny2020
@Binny2020 6 лет назад
I think you've found the cheapest provider for aluminium extrusion there Peter. Thanks.
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
They do seem to be very competitive. Great range of little bits and pieces too 👍👍
@EscapeMCP
@EscapeMCP 6 лет назад
Peter Millard I'm currently to build a Ready2Rout style computer controlled router table fence using various bits from Ooznest. I can't but help in thinking of new uses for the various components I see when I browse their site.
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
EscapeMCP I know! So many handy little bits and pieces 👍👍
@chipatchison5971
@chipatchison5971 5 лет назад
Just ordered a Fence Dogs & 1000mm Fence with V3 Flagstop!!!! I am looking to using it in my little workshop in the colonies :) Thanks to Ralph at Benchdogscouk!
@vRSPagey
@vRSPagey 5 лет назад
Chip, did you order M5 or M6? I'm looking to buy these but not sure which ones fit the Oozenest extrusion.
@markkoons7488
@markkoons7488 2 года назад
You always come up with great information and waste little time presenting it. Here's my problem: After subscribing to far to many channels as my interests have shifted over the years, RU-vid presented the option of not being notified of new releases. I clicked on that and now get no notifications about the new content of channels like yours that I do want to follow. Can anyone explain how to reinstate the notifications I want and delete those no longer of interest? Thank you.
@paulminott2269
@paulminott2269 6 лет назад
just had an email from bench dogs , they now sell their fence stop to fit the 2040 extrusion separately (£12.50)
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Yep, should be getting a set next week to try out 👍👍
@macbaar
@macbaar 6 лет назад
Oooooooooooh what to say... a must have! Thank you!
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Only the good stuff here 😆👍👍
@stephendixon8575
@stephendixon8575 5 лет назад
Hey Peter, I know you said you were a 'cheapskate' but if you look at the price of Benchdogs.co.uk kits that come with these fence dogs and a flag stop, it costs only £27 for their 1m fence rail AND it's been laser etched with a mm accurate scale along it's length. Sure you could buy a stick on measurement scale for your Ooznest 1m extrusion, but the price difference by the time you've paid for shipping (£12.60 + £8.27 P&P = £20.87) is just over £6 and that's with the laser etched scale. Don't get me wrong, sometimes I spend ages trying to find a cheaper way to do things myself, only to realise that even an hour wasted doing this is more costly than what I've 'saved' (LOL)
@10MinuteWorkshop
@10MinuteWorkshop 5 лет назад
Absolutely; Bencjdogs weren’t doing the last etched fence when I made this video - it’s a relatively recent addition. 👍👍
@Benchdogtools
@Benchdogtools 4 года назад
Very true peter it was bought in afterwards. The joys of progression. The new fence now has the double scale in it. On its route to you.
@lafranced
@lafranced 4 года назад
You answer my question. V-Rail 2040. I need to listen. LOL
@paulmacey9084
@paulmacey9084 5 лет назад
another brilliant video great ad vice look ford to the next paul
@10MinuteWorkshop
@10MinuteWorkshop 5 лет назад
Thanks Paul! 👍👍
@JasonShowell
@JasonShowell 6 лет назад
Look forward to the build as I have just started out on a series of new benches. Have you considered making your own MFT type top using Peter Parfitt Parf Dog System? It is incredibly good and easy to use and you get exactly the size and spacings you want. Well worth a look if you are not just buying a premade MFT top.
@JasonShowell
@JasonShowell 6 лет назад
ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-WAHFxRhWB6c.html
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Thanks Jason. Yes, I’ve seen the Parf System - Axminster were supposed to be sending me one to try out, but nothing’s happened as yet - but I think for what I have in mind it’ll be cheaper just to have one CNC’d 👍👍
@KenPem
@KenPem 6 лет назад
Darn you, Mister Millard! There goes this month's toy budget. Silly idea for a future episode: take a look around your workshop. What do you have that you NEVER use any more (or ever)? And why do you still have it? I have a tiny workspace (about 7' by 9') with NO WALLS (conservatory), so I've had to be quite vicious in what I get and what I keep. You've got more space, sure, but still limited. Are you ever faced with the dilemma of what to get rid of so you can fit something else in? Maybe even challenge your fellow RU-vidrs to do the same...
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Woah - a kind of cathartic cleansing! Like it! 👍👍
@EscapeMCP
@EscapeMCP 6 лет назад
Peter Millard OK, I'll go first. I'm opting to get rid a tool I never really use any more. It's called "the wife". :)
@petercurtis9297
@petercurtis9297 6 лет назад
Blast! I'll add it to the list.
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Sorry. I’m thinking of having a ‘wallet-warning’ klaxon in the videos - good idea?? 😂👍
@tonyseddon6132
@tonyseddon6132 6 месяцев назад
Brilliant,
@Benchdogtools
@Benchdogtools 6 лет назад
Great video Peter, Glad you like our products. Love watching your videos especially this one.
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Thanks - though I think you might be a bit biased with this one...😂👍👍
@andrewwomack4286
@andrewwomack4286 6 лет назад
Try RS components for aluminium profile, v nuts etc. They offer a next day service for in stock items and THE PRICE INCLUDES CARRIAGE. There may be much cheaper soufces of profile available but thr carriage costs may be eye- watering.. Your inspiring channel adds more ideas and techniques to my already long list of things I want to do means thaI will have to live anothef 69 years!
@orremm
@orremm 6 лет назад
Very cool
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Thanks! They’re really clever 👍👍
@davidosullivan3432
@davidosullivan3432 6 лет назад
I think it's a brilliant system you have especially as a professional cabinet maker with no need for a table saw "hate them" I take it this fence is set up to cut lengths repeatable with stops?
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
It will be yes. As I say, this bench build is still at the design & planning stages - but you can use the fencedogs with a variety of existing fence systems. 👍
@mikes6844
@mikes6844 6 лет назад
Just ordered a flag stop from Bench Dogs, it looks to be a new product so I’ll let you know how it goes.
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Thanks Mike. Yes, Ralph at fencedogs has been busy - he’s sending me a couple this week to try out, so there’ll be another video 👍👍
@abmac58
@abmac58 6 лет назад
Great Stuff Cheers
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Cheers! 👍👍
@michaelodonovan1908
@michaelodonovan1908 5 лет назад
Looking forward to your bench build video series : )
@10MinuteWorkshop
@10MinuteWorkshop 5 лет назад
Yeah, had a few issues with that plan - patent-related - so it's been shelved for now until I can come up with an alternative way of showing what I wanted to do. 🤷‍♂️
@tonylorentzen
@tonylorentzen 6 лет назад
Great tip!
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Thanks! 👍
@JohnVanderbeck
@JohnVanderbeck 3 года назад
One of these days I'll figure out why some prices are measure in quid and some in pounds :)
@silverfox8801
@silverfox8801 6 лет назад
Pete. What would you use this fence for? Did you say you were building a new bench which includes this? Great channel! Excuse the pun!? 👍👍
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Haha, good one! I’d use this fence for anything where I’d want to be able to remove it to turn the bench back into e.g. an assembly table, and then back into a cutting table *with the fence & stops in exactly the same place* And thank you! 👍👍
@johngaffney1671
@johngaffney1671 5 лет назад
Great idea Peter, I'm currently working without a MFT and it's a pain, so I'll definitely check out fence dogs.
@10MinuteWorkshop
@10MinuteWorkshop 5 лет назад
Cheers John. FenceDogs are such a great idea 👍👍
@iancraigen
@iancraigen 6 лет назад
You need to check out the Yellowboxshed.com.au for their variety of bench dog products and even a vacuum attachment for the ujk parthguide, which is a great way to create your own bench top without a cnc machine. See new Brit workshop for the parthguide videos. Dave Stanton has a great bench design that uses the 20mm dog holes, festool guide rail tape and t track
@LostWhits
@LostWhits 6 лет назад
I want to see how your old bench looks.
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Haha - we’ll if you check out video #57 - bandsaw onsite, it’s about a year worse than that! It’s still functioning, but isn’t great... 👍
@LostWhits
@LostWhits 6 лет назад
Still looks better than some I've seen. Can't wait to see what your replacement looks like.
@garyblake3130
@garyblake3130 6 лет назад
Hi Peter, just ordered the extrusion and dogs, you really should be on commission. Did I hear you say you are making a bench video? look forward to that, don't leave it to long before its out.
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Thanks Gary! Commission- that’ll be the day! Yes, it for a mobile bench build - still at the planning stages, it’ll be a few weeks yet 👍👍
@thomaskitchin3517
@thomaskitchin3517 6 лет назад
Awesome, had been wondering what to do with that extrusion off cut... The possible future MFT purchase has now slipped right down the list :)
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Awww, man - there goes Festool as a possible sponsor... 😂👍👍 Hey Tom - always good to use up some old bits and pieces, right?? 😆👍👍
@thomaskitchin3517
@thomaskitchin3517 6 лет назад
Hahahaha - always mafell 🙊🙄😉 Def just ordered the fence dogs
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Cool. They’re really nice, well handy 👍👍
@worzelbxoy3565
@worzelbxoy3565 6 лет назад
Peter will the festool clamps fit in the Oosnest v track ????????????????? Not downstairs.....?????? nearly pead myself ............ Ave's term is "down in the dobleydo". 👍👍👍👍 Great Chanel 👍👍👍👍👍👍👍👍
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Thanks! No, this size v-track is too small to take Festool clamps unfortunately, so if you wanted to make a full-size MFT-alike you’d need to find the old-style 80-20 ally👍
@cliveclapham6451
@cliveclapham6451 6 лет назад
Peter yes remember now, l looked at them a few years back thought that why l didn't go with them. Doh. 👍👍👍👍👍
@MrUmy786
@MrUmy786 6 лет назад
Hi Peter, is there any extrusion or T-Track available to buy that'd fit the Festool clamps similar to the way you can use on the MFTs?
@frankparrish7664
@frankparrish7664 6 лет назад
Worzel BXOY 233
@DominicGiles
@DominicGiles 6 лет назад
What about attaching/using the track saw for repeatable 90degree cuts as seen on the MFT...? Is this part of the future workbench?
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Now that would be giving away the plot... 🤫👍
@leigh051985
@leigh051985 6 лет назад
Hi Peter, always look forward to a Tuesday and a Friday! Thanks for your video's. You have taught myself and I imagine many other people so much! I look forward to the mobile bench, and also to know your festool mft, can you get the folding cross cut section separate from any where?
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Hi Leigh. You can buy all the parts to make it as spares (see the Miles tool & machinery website) but it’s priced in such a way to as to... not really make it economical, let’s say. 😬
@leigh051985
@leigh051985 6 лет назад
Thanks Peter. Just a thought. Maybe something cold be adapted to the rails you have featured in this video to make a folding cross sled😀
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
...and imagine if you incorporated that into a mobile bench! Nah, crazy idea 🤫👍
@monteglover4133
@monteglover4133 6 лет назад
T-slot aluminum is what it is called here. 80/20 has a lot on miscellaneous pieces on eBay
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Thanks Monty. This is V-slot, it’s a different profile from T-slot, and things designed for t-slot (e.g. Festool rail clamps) won’t fit v-slot. 👍
@monteglover4133
@monteglover4133 6 лет назад
Oh I thought that they used the industry standard
@covcarpenter9158
@covcarpenter9158 5 лет назад
Hi peter iv just subbed great channel nice to see a british chap like my self doing the youtube
@10MinuteWorkshop
@10MinuteWorkshop 5 лет назад
Thanks Daniel, and welcome! Don’t forget to check out the back catalogue👍👍
@covcarpenter9158
@covcarpenter9158 5 лет назад
Iv been binge watching. Can you show that large festool router what is it iv got the of1010 and of2200
@22illingworth
@22illingworth 4 года назад
Another fantastic video Peter, I have learned so much over the past few months from both you and your videos as well as the Rag and Bone Man. Do you have a video showing how your track for your track saw attaches to the fence? Also would your track, or any other track for that matter, fasten to this fence in a similar way that your track operates on your main table?
@10MinuteWorkshop
@10MinuteWorkshop 4 года назад
Thanks Richard! The fencedogs are excellent, and I’ll be using Benchdogs hardware when I build my mobile bench in the near future (5% discount at Benchdogs with the offer code ‘10minuteworkshop’ btw...). Re my rail setup, I have the festool MFT and the hinges rail comes as standard with that; it’s not hinged off the fence btw, but off the bench extrusion. If you haven’t caught them yet, videos 182 & 183 cover the MFT setup in some detail. 👍👍
@brianmoore47
@brianmoore47 4 года назад
Excellent idea Peter 👍when are you making the workbench I’ll look forward to that project ...
@10MinuteWorkshop
@10MinuteWorkshop 4 года назад
Thanks Brian! Bench build will be coming before too long - haven’t got my hands on the latest version of the fence yet, so there are a few planets to align just yet. 👍👍
@dmcguinness100
@dmcguinness100 4 года назад
Hi Peter, thank you. Just ordered the rail and bench dogs, after making my own parf MFT. Looking forward to being more efficient with my kitchen Installation business, Enhanced-Kitchens.co.uk. Keep the videos coming 👍
@10MinuteWorkshop
@10MinuteWorkshop 4 года назад
Nice! 👍
@edsmith7003
@edsmith7003 Год назад
Hi Peter, hope you're well. Really enjoying your content and tips. I'm looking to add the ooznest guide 20x40mm guide rail to my mft. What stop to you use to set specific lengths? Conscious the T track groove is possibly only 6mm and some standard stops sold online may not fit. Any help would be much appreciated 👍 Many thanks Ed
@10MinuteWorkshop
@10MinuteWorkshop Год назад
They’re benchdogs stops - the benchdogs fence uses the same extrusion slot as the Ooznest profile. 👍
@ratchriat1716
@ratchriat1716 6 лет назад
i think is great peace off toll you can have enjoy the video.
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Thank you! 👍👍
@anthonieboogaard645
@anthonieboogaard645 6 лет назад
Nice little video. Still thinking how I want my bench and this certainly adds another option. Have you considered the Parf dogs? No simple solution for a flip stop, but the ‘fence’ won’t obstruct the guide rail. Or will you always increase the thickness to 20mm?
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Thanks! Don’t really understand Parf dogs, how they differ to regular bench dogs; I have plenty of bench dogs/ rail dogs, used them for ages before I bought my MFT, wouldn’t go back! Different for mobile admittedly, still pondering that one 👍👍
@H190l
@H190l 6 лет назад
The difference is in the long ones. The short (regular) ones are supposed to be the 'fence' (nothing special there indeed) and the longer ones are to register your rail against to make square cuts. Very curious to find out how you will align the rail with this fence.
@GregWallis
@GregWallis 6 лет назад
You swine! Yet something else I HAVE to buy. This was excellent and just what I could do with. Many thanks.
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Some things you just have to have 👍👍😆
@tonysutcliffe7282
@tonysutcliffe7282 4 года назад
Great video Peter, and more great ideas for improving my MFT. Benchdogs do the fencedog in M5 and M6. Could you confirm which size you used that fits the Oozenest V rail? Thanks
@10MinuteWorkshop
@10MinuteWorkshop 4 года назад
Thanks Tony! Pretty sure they only did M6 when I got mine, but I’ll check when I’m in the workshop. I don’t think the size of the t-nut changes because of the thread size though - you just have to get the right M-threaded t-nut for your bolt. I’ll check though, and get back to you. 👍
@Benchdogtools
@Benchdogtools 4 года назад
Both will work no problem. The M5 was bought out for users in America who use a 8020inc extrusion. Which has a slightly smaller v slot
@rolandbaumer1939
@rolandbaumer1939 3 года назад
Peter, thanks for this very inspiring video. The only question I have is which Tee Nut do you use with the V-Slot Rail? OOZNEST only offers Tee Nuts from M3 - M5. Benchdogs offers the fence dogs with M6 and M5 options. Will M6 fit into the V-Slot Rail? Thanks!!
@keithscrafts
@keithscrafts 6 лет назад
I'll be very interested in following your bench build. I really need to build something with an MFT top for the Ts55. Will you be building the bench from extrusions also?
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
No, it’s not an MFT-alike, just a variation on what I have already. Very much ‘my’ portable bench, but a easily adapted 👍👍
@dusttilldawn123
@dusttilldawn123 6 лет назад
Hit that bell guys🔔🔔🔔
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Ding, Ding! 😂👍👍
@jessemackin6875
@jessemackin6875 6 лет назад
I was trying to cut back on my tool buying...thanks alot! If you're doing a new bench build, maybe your thoughts on the Parf Guide system from Axminster or the Dominofix jig. I have both. Yet to use the Dominofix jig. The Parf system takes a very long time to set up and after all the effort it wasn't as accurate as I had hoped. And there was a little play in the fit of the veritas bench dogs. But the fence looks great Cheers
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Cheers Jesse. Axminster were supposed to be sending me a Parf guide system to try, but nothing’s materialised. Seems a bit pricey for what it is - you can get an MFT too CNC’d for 30 quid - and interesting to hear about your experiencing lack of accuracy - last thing you need! But yeah, more to come with the mobile bench & all 👍👍
@jakefallon2335
@jakefallon2335 6 лет назад
Just to throw a spanner in the works I have the Parf Guide system and it worked a treat. Very accurate. Just as good as my MFT, though sadly I need to make a new one now as the old one looks like an ice skating rink after an elephant dance training session. :o(
@jessemackin6875
@jessemackin6875 6 лет назад
I think it was more the play in the tall veritas dogs when I pushed the rail against them as the shorter ones where fine. Measured both with calipers and they are both the same.
@jaimeclifton9078
@jaimeclifton9078 6 лет назад
Hi Peter, I don't suppose you cover repeatable thin rips on the MFT anywhere in any of your vids do you? By thin I mean narrower than the guide rail.... I've thought and thought about it but can't come up with anything reliable. Many thanks Jaime
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
Hi Jaime. Now you mention it, I don’t hunk I have covered this! There’s a couple of things I do; obvious thing is that you clamp a stop outside (ie to the right of) the rail so you’re effectively cutting & keeping the elevate side of the line. Then to stop the narrow rip to ‘run away you can either tape it to another board of the same thickness, or put a false fence on the waste side. This is probably best explained in a video tbh! I’ll get to it shortly 👍👍.
@jaimeclifton9078
@jaimeclifton9078 6 лет назад
Hi Peter, Thanks for the reply. Yes I did think of something like that but sort of went off the idea because I wondered whether having to allow for the kerf was marginally less accurate than measuring from the splinter strip to a stop of somekind underneath the guide rail..... Anyhow it would be great to see how you went about it. Many thanks Jaime
@davidfoulds1620
@davidfoulds1620 6 лет назад
If I concentrate very, very, very hard perhaps I'll forget I ever watched this. Not working yet!
@10MinuteWorkshop
@10MinuteWorkshop 6 лет назад
I’m considering a ‘wallet warning’ klaxon in the videos - good idea?? 😂😂👍👍
@davidfoulds1620
@davidfoulds1620 6 лет назад
A flashing subtitle - Warning, this programme contains content that some viewers may find expensive :-)
Далее
A small kitten was dumped #cat #kitten #cutecat
00:41
Cute
00:16
Просмотров 7 млн
FlagStops! [video #215]
6:26
Просмотров 26 тыс.
DIY dog hole accessories
6:48
Просмотров 81 тыс.
Backyard, DIY MFT on a Budget  [video 490]
15:43
Просмотров 192 тыс.
Maximize Your Festool MFT/3 Performance!
11:36
Просмотров 28 тыс.
I regret not building this sooner
14:39
Просмотров 279 тыс.
Every beginner needs to hear this
11:10
Просмотров 1,6 млн
3  MFT Rail Hinges [**Gifted/Ad][video 494]
15:40
Просмотров 86 тыс.
Making An MFT Top - No CNC, No Guide Jigs
17:11
Просмотров 718 тыс.