Fiesta st gets track mods. Hardrace EXTENDED ball joints and superpro poly bushes

Подписаться 30 тыс.

Просмотров 15 тыс.

50% 1

Track mods continue on yobo the fiesta st180. Im fitting Hardrace roll centre correction extended ball joints. These are 17mm taller than a factory ball joint. also we fit superpro performance pack of bushes on the front wishbones. These include the off centre bush to increase the caster angle of the suspension. all parts supplied by Rival motorsport so check the web link below
Click this link for FAST N' OLD t shirts
teespring.com/...
Support my channel here paypal.me/pool...
Business contact sparkplugsteve@hotmail.com
Thanks to pumaspeed for continued support
www.pumaspeed.c...
www.rivalmotor...
finsport.co.uk/
deltastyling.com/
www.motura.co.uk/
www.godspeedbr...
coolerworx.com/
Fiesta st 180 list mods so far ;
scorpion sport cat
R sport PRO 400 gen2 intercooler
itg air filter
R sport crossover
R sport hot side pipe kit.
pumaspeed short shifter
Rsport baffle sump kit
Maxd out stage 2r cat safe crackle map
miltek non res exhaust
Delta styling front bumper , splitter , side skirts
GFB DV
Meister r clubrace coilovers
Endless me22 pads
braided brake lines
coolerworx short shifter

Опубликовано:

18 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 63

@benbearwilliams2161 4 года назад

Take it easy steve stay safe in current climate. Considering buying a fiesta st after watching your videos

@sparkplug964 4 года назад

I hate doing bush work, some people like you Steve make it look easy, myself just make a bigs ear of it, and swear allot. it's one job I do not mind passing on.

@andyterry5397 4 года назад

Only recently started watching your videos steve just like to say you are a star keep doing what you do I reckon you are brill.you explain really well camera gets right in there so we see the lot and well nothing else to say stay safe and good luck for all future ventures...Andy

@Sparkplugsteve 4 года назад

Thank you Andy

@chrisblay 4 года назад

That reminded me of heating up a bearing carrier on the cooker ring, when replacing a set of bearings with my Dad many years ago. Use of heat/cold when you don’t have a press is very effective.

@rcokeman9495 4 года назад

That vice was a hell of a find 👍

@Sparkplugsteve 4 года назад

Go watch the Renault trafic 1st video. 😉

@ianofsjkartwork 4 года назад

Top job Steve.....stay safe...thanks for sharing

@cyrilmckinstry7863 4 года назад

Hey Steve good video keep them coming. Stay safe

@meddylad Год назад

I bought both left and right Superpro lower control arms with the superpro bushes and uprated balljoint for £240 all in.... a little pricey but saves all the hassle of pressing out old and inserting new. Just need to test it now 😂

@skodakatie7341 4 года назад

Well done Steve, that looked like a very involved procedure!!.

@LighttownMadness1913 4 года назад

Hi Steve, the bolt that broke (from control arm to knuckle) is a one time only bolt I believe. Ford's manuals say that you have to replace that one each time. I thought that was unneccesary at first but I'm happy I did replace them when I took out the driveshafts, now that I see this video... Good job on the bushings by the way

@dixiedean2911 4 года назад

Another epic insight into your cracking track day car keep them coming really need the daily fix. Stay safe....👍😊

@fordyford 4 года назад

Interesting vid again. The colour of those bushes are pretty good for a blue car too. Chicken Pies. The food of the gods.

@rossmale8715 4 года назад

That freezer looks Corona ready mate 😂 could live outa that for 3 weeks lol

@tjctpuppets2108 4 года назад

Stay safe Steve ✨

@philiphutchinson4210 4 года назад

New to your channel Steve, love your attitude and cars.Thank you

@philipnewton7524 4 года назад

You made the job look easy my friend well done I do not like using the T wrench since my old mate shaped a couple of head nuts on is yamaha 250cc motor bike again that never clicked Phil from stoke

@gerryhayes6385 4 года назад

Good work Steve 🔧🔧👍

@r53leon6 4 года назад

fantastic yet again steve 👌🏻

@mansdaz 4 года назад

Thanks steve enjoyed the video mate.

@markmawson1 4 года назад

Steve regarding your torque wrench when you get a new one i don't know if you do but after each time you use it just before you put it away fully unscrew the handle to take the tension off the spring as i have found out a few years back of an old mechanic that's usually what causes it to malfunction now and again and stops the spring going soft and giving false torque readings.

@skybluesam5676 4 года назад

Mark Mawson that's sound advice there ..... good shout!

@James-ns6jm 4 года назад

Always worth calibrating your torque wrench too. All you need is a Vice which i know you have :) some luggage scales and measuring tape and some tape and a pen. There's quite a few videos on youtube which probably explain how to do it better than me. Just search calibrating your torque wrench. But it's really easy and worth doing every so often to make sure it's not gone out of spec.

@blueballs_m135i8 4 года назад

Great update mate shame that the bolt snapped

@skybluesam5676 4 года назад

chicken pies and hardened poly bushes ...... the perfect combination IMO

@grahamrowland6681 4 года назад

Great video good explanation

@anthonytessier1324 4 года назад

Super vidéo 👍

@alexowen9245 4 года назад

Them pies are the one 🤣👌

@nathanlewisuk 4 года назад

Great video 👍

@adamcrook9837 4 года назад

11:18. This lockdown sending everyone mad 🤣

@michaelmatthews8171 4 года назад

You made it look so easy. Did you re fit the engine mount that you modded???

@Sparkplugsteve 4 года назад

Yes I did. Not tested it yet though.

@simonmayo1502 2 года назад

Hi Steve just a quick question have you ever came across parts from different manufacturers be in slightly different length like wishbones

@UltimateGamerLive 4 года назад

Steve next time when I get a Ford St I'll bring it to you haha!

@marc9283 Год назад

Hi Steve, did you ever have any problems with the caster bushes? I cant decide between Powerflex and SuperPro

@Chris7uk00 4 года назад

Lower ball joint bolt should only be 48nm Steve, My torque wrench does that too, I need a new one, going to treat myself and get one.

@steveh9229 4 года назад

Good job Steve. What make is the broken torque wrench buddy.

@jokebre 4 года назад

Noticed much difference with the poly bushes fitted?

@cm20081992 4 года назад

So I didn't quite understand what you said about a bump steer video, are you gonna make one? I'm really curious to see the results!! I am lowered and stage 3. Under full load in a slight bend, if i hit a bump the steering goes to the inside (of the corner) like crazy, like the car is all over the place so i'm trying to correct that... so these extended ball joints should help with that? Thanks Steve!

@Sparkplugsteve 4 года назад

Yes a full bumpsteer video is uploading now

@daibennett9224 4 года назад

Easy as chicken pie

@19marshall80 4 года назад

Hi Steve, Does this affect tracking in anyway? great vid :)

@Sparkplugsteve 4 года назад

Yes it will need setting up.

@pedrocacao5081 4 года назад

What make you go to Superpro, instead of other poly bushes brands? I am considering a roll center adjuster, since my car is much lower than stock! Stay safe!

@Sparkplugsteve 4 года назад

Thanks. Watch previous video as I explain my reason there. 😉

@mickducati1947 4 года назад

👍😜

@hertsdude Год назад

What caster angle did you manage with the superpro increased caster bushes? Have their arms but struggling to get any more than 3.25 degrees

@Sparkplugsteve Год назад

Take a look at a video I posted on my Instagram. It will explain the reason for your issue

@hertsdude Год назад

@@Sparkplugsteve thanks but not on Instagram 😲

@hertsdude Год назад

@@Sparkplugsteve found the video 👍🏻 not impressed with superpro I have the exact issue you have with the lockdown vudu kit too might go for the DNA racing adjustable arms

@Sparkplugsteve Год назад

It's not good as their supposed to be caster increasing wishbones

@hertsdude Год назад

@@Sparkplugsteve yes indeed I have sent a email complaint direct to superpro complete waste of time and money 😔