Finally!?! // FlyWoo Firefly Nano Baby 20 // Small Drone Fun

Подписаться 59 тыс.

Просмотров 39 тыс.

50% 1

We now have a 2inch 2s Bind & Fly option. And I like it 😃
Nano Baby 20 Available From Below Resellers
FlyWoo - bit.ly/3xaXihC
- F405 AIO - bit.ly/3Brs4VW
Bangood - bit.ly/3gdeKw7 (US & Canada Coupon "BGNick2022" 8% off)
RaceDayQuads - F405 - bit.ly/3eqNqJY
GetFPV - bit.ly/3RyWgEm Listed soon
DefianceRC - bit.ly/3qtGBdz Listed soon
Infinity Loops Channel - / infinityloops
🔥Daily FPV Gear🔥
► Goggles Orca FPV.One bit.ly/3eAgsBw 💣
► Charger SkyRC Q200 QUATTRO bit.ly/2KgUd8i
► Radio I use RadioMaster Zorro bit.ly/3JUiNrr
Zorro @ Amazon amzn.to/3uDFt8J
► Best Micro Batteries!! 💯 GNB 💯
Banggood bit.ly/2PoJglo
Amazon amzn.to/2Xw5VPr
► RDQ Batteries (Made by GNB) bit.ly/2ZsCob5
► Adhesive Welder amzn.to/2IpKKHj
► Motor Wire Tape bit.ly/3airvyv
► Same tape from Amazon amzn.to/3iJjTrT
👌🏽Affiliate links 👌🏽
If you would like to support this channel please use these links.
► Banggood - bit.ly/BG-NB
► RaceDayQuads - bit.ly/RDQ_NB
► RotorRiot - bit.ly/3N40Ebp
► AliExpress bit.ly/3vMbOZK
► GetFPV - bit.ly/3rnx05U
► Amazon - amzn.to/3iJjTrT
► Emax - bit.ly/3sn3AGm
► MakerFire - bit.ly/37TAmGo
► Heli-Nation - bit.ly/H-N-NB
► BetaFPV - bit.ly/BFPV-NB
► AirBladeUAV - bit.ly/ABUAV-NB
If you use these links to make a purchase I may receive a commission, which helps to explore more products on the channel, at no extra cost to you.
👍Reward Free Patreon + Discord
► / nickburnsrc

Наука

Опубликовано:

8 сен 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 291

@NickBurnsFPV Год назад

#1 Question - What are my rates. Answer - Betaflight rates 1.2 Pitch and Roll, 1.3 Yaw. Super Rates .75 Pitch and Roll, .8 Yaw Nano Baby 20 Available From Below Resellers FlyWoo - bit.ly/3xaXihC - Use code "nanobaby20" for 8% off. Terms first "batch" of customers receive discount - F405 AIO - bit.ly/3Brs4VW RaceDayQuads - F405 - bit.ly/3eqNqJY GetFPV - bit.ly/3RyWgEm Listed soon DefianceRC - bit.ly/3qtGBdz Listed soon Infinity Loops Channel - ru-vid.com

@hendranandradrone7064 Год назад

Good luck

@xnoux1 Год назад

#2 question :D what ELRS frequency do you use? 500Hz? :)

@NickBurnsFPV Год назад

@@xnoux1 😁 Outdoor I stick with 250hz, inside after the review I often switch it up to 500hz. Why after the review. I really don't have a good answer. Maybe I feel it makes the flight of the review video more likely to be like the experience others would have. Thinking the masses wouldn't switch to 500hz.

@xnoux1 Год назад

@@NickBurnsFPV thank you for the detailed answer! :) I was asking also because I suspect high frequency can stress those little boards. I have a bluejay “heavy” build with HappyModel Fyujon and a Baby Ratel 2. The camera tends to heat up and I lose video (not OSD) and so far it happened only when I was at 250Hz, not at 50Hz. Could also simply be the camera that is defective but wondered if you’ve noticed such a behavior caused by High ELRS frequency during your thousands of hours of flight time xD

@NickBurnsFPV Год назад

@@xnoux1 I haven't seen that sort of behavior before. I too would lean towards the camera having an issue. We could test the camera outside of the quad to see if we can replicate on the bench with a 2s battery and a vtx. Otherwise if we just have a different camera we can test with it might confirm the issue one way or another.

@Soulsurferfpv Год назад

Great review. Yes - finally BNF 2" 2s.. although I build my own 2 inchers, this is great to see for those that don't build or are just venturing into the 2s quads. 👍

@MCsCreations Год назад

Pretty fantastic flying and review, Nick!!! 😃 I loved this little quad! It really flies amazingly! Stay safe there with your family! 🖖😊

@StuckOnAFireHydrant Год назад

Fun lil 2s ripper! I recently picked up some tpu for my printer so I can start experimenting canopy designs in my quad

@jebrc Год назад

awesome little quad thanks for sharing Nick

@janapeng2079 Год назад

Thank you for your sharing! Nick

@InfinityLoops Год назад

Thanks for the love Nick! This build looks interesting, right up your alley. Curious about these 1002 flywoos...

@Quad66 Год назад

On the high kv option I didn’t see any major difference between the Flywoo and RCinpower. Punch out and flight time seems about the same.

@InfinityLoops Год назад

@@Quad66 Thank you!

@slowentropy4531 Год назад

House is looking amazing, the flight style is ever evolving but still that racer style at heart haha. 2S is forever great, seen NBD nitro nectar have 2S packs and look like they really dish out the amps!! Cheers mate

@shakeymikesadventures6793 Год назад

The camera on it looks like a 1.8mm lens, we are used to the 2.1mm ones. The others tend to fisheye,but I like flywoo stuff. As far as flying in new places i tend to be a bit reserved on the way i fly and my yard tends to be the abusing grounds. I have 2 micros stuck in the arena rafters right now, one from me fooling around ,and another from a kid who has out paced me in the very few weeks of flying. Kinda makes me jealous on how some can progress so fast as i go backwards. Thanks again Sir for what you do for our community.

@MrCrowleyandhisdrone Год назад

Awesome 2' great vid, pool looks awesome. I think I may need this one

@dondupuis4007 Год назад

Thanks! Great job, thank you for what you do!

@NickBurnsFPV Год назад

Much appreciated!

@doodgeslagenmug 7 месяцев назад

I think the Emax 350 2s batteries are great too! Ofcourse you’d need to solder your own xt30 plug to it. It weighs only 17 grams, pretty sweet.

@medrone7097 Год назад

Nice looking little quad. I’ll look forward to Nick’s review of the DJI version before I make a decision (looking at you Flywoo 🧐).

@brianfreland9065 Год назад

It comes with a 2nd battery bay. Albert Kim pointed out how they twist out at the base and can twist the larger bay back into the hole underneath. It's like a little rectangle stopper that twists into position.

@user-fy8ii3np9l Год назад

2:18 its printed on the battery bay 420

@brianfreland9065 Год назад

I've been waiting on a new micro review! Thanks nick!

@brendand.2269 Год назад

Wow it looks like it flies really well

@NickBurnsFPV Год назад

i do like it. I prefer my rocket race 2s just a touch more but for a bind and fly its as close as we have seen to my favorite quad the rocket race 2s.

@thomasfischetti5012 Год назад

What is your favorite dji digital micro/lightweight quad for your size backyard? My layout is pretty similar and looking to get into something for the cold season so I don’t have to go to the park to fly my larger 5”

@Adam_Carbone Год назад

I don't know what that was at 5:09, but it looks sick! 😂😁 Awesome flying, this one looks like a really fun option and great review, love watching the specs portion as always!

@rfly-fpv Год назад

0:46 OMG this was amazing trick :D

@andrewut7ya511 Год назад

Pretty impressive, you were going hard on those punches. I kinda want one for days when i can find a good spot to fly a 5 inch. looks like you could fly this at any park or just around a few trees to freestyle. The spots around me can have alot of people walking around so 5 inch flying can be dangerous, this thing would be chill tho.

@crddrones3457 Год назад

👍 swweeet wove it ! !! God bless

@ChrisParayno Год назад

I started with a 2" tinyhawk 2 race and it's still my favorite quad.

@NickBurnsFPV Год назад

This is a fair step up from the tinyhawk 2 race don't you think? Its been a while since I have flown the tinyhawk 2 race.

@itouchipods Год назад

I love you’re flight style nick. That’s what assures me you know what you’re talking about. You really rip- for an old man :p

@hendranandradrone7064 Год назад

Nice.....thank you for sharing

@PaulieShortcuts 9 месяцев назад

FYI you are correct about the battery leads. Even with the zip tie eventually I ended with several failsAfes and then a FC fire. I was able to rebuild it. I have both a dji and analog and the weight makes one a cruiser while the other floppy flops. I tried to add gps to my hd but VTX overheats before gps locks 5

@NickBurnsFPV 9 месяцев назад

hd vtx do warm up pretty fast and need air flow. Might have to have a small fan blow on it while getting the gps lock. I have had to do that as well.

@johncarold Год назад

Hi Nick YEP I have also been looking for a 2s Mico. For about the last couple of years, I've have been using 1s quad and making a 2s or 3s. And for the price it's worth it. Thanks again for the video and information.

@eprohoda Год назад

amigo!epic picture-💥

@kieren7763 Год назад

The static is from the power draw i got it once I went to xt30 I had to put a capacitor on anyway because I have the crazy bee board and it helped abit but mines still worse than yours as my vtx is the stock mob 7 type

@tonymorgan328 Год назад

Thanks for another great review and flight Nick. This looks like my kind of back yard ripper. I'm forced to buy almost everything you review. I'f I'm not careful, I'm gonna have to go back to work. 😁

@NickBurnsFPV Год назад

oh now, be careful no one wants the later to happen :)

@erikvf7 Год назад

Very nice little ripper! The camera colours looks nice, but I think I'd prefer a shaper image like the Runcam Nano3, that is not the most beauty but very clear and easy to see tree branches and wires..

@broken4999 Год назад

Thanks nick for the video

@dondupuis4007 Год назад

Thanks!, learning so much from you.

@NickBurnsFPV Год назад

You are so welcome!

@scu-dub Год назад

Awesome!!!! You had me wanting a 2s micro ever since that Bad@$$ TKS Nick lol this looks like a winner excellent review as always 👍🏾✌🏾

@KOrnhOliO1 Год назад

My Diatone GTB229 will run circles around this, and appears to handle so much better! Way, way better quality parts too! Geez, times have changed... Less quality parts and 50% more price! Sheesh! 🥴

@memnuts Год назад

This reminds me of my diatone gtb229 or my BQE mini pixel. I really like these kinds of quads

@KOrnhOliO1 Год назад

Yeah, but that Diatone flies so much better and will run circles around this quad. It uses 65mm Toothpick props compared to these small ones, 1103 motors, TBS Unify VTX, and a much better frame! Far, FAR superior product! With much better parts! Not even close... And this one is a whopping $170 without a receiver. Sheesh... I wouldn't buy this if you gave me the money! 😵‍💫🙄🚫

@CDRaff Год назад

Flywoo and RDQ stickers multiply like bunnies. I have them all over my office and work area.

@NickBurnsFPV Год назад

I suspect they get those for pennies by the 100s :) I collect them and put them in giveaway boxes. Feels wrong to toss them and I don't tend to put stickers on stuff.

@D18racer51 Год назад

Recently dove head first into hdzero.. absolutely loving it!!! Would love to see you test the hdzero version of this.. looks like a decent micro!! I love micros!! Edit: how does this compare to you beloved RR?

@NickBurnsFPV Год назад

Its close, the RR has an edge though. The ability to run triblade props well has a touch more of a crisp flight feel to me.

@D18racer51 Год назад

@@NickBurnsFPV love my gemfan 2023💪🏻

@PakRC Год назад

Excellent review!

@NickBurnsFPV Год назад

Thank you

Год назад

Reading flywoo product description they say the "extra" battery holder is for the bigger battery. It is not a replacement! It's included in order to easily switch between the 2 battery sizes

@NickBurnsFPV Год назад

Yes, I missed that marking on the other battery holder.

@gazzabyerun9048 Год назад

🤓Nice review, thanks!

@gwells20 Год назад

The orbit the tree look up trick is back!! Right on Nick Burns!! Also not all the way through the video but the battery holder on the bottom says 420(goes with 420mah battery. Maybe the other one that came with it is for the larger battery. Check what is says on the bottom perhaps

@NickBurnsFPV Год назад

Yeppers. I missed the other battery holder isn't a spare but rather for the larger battery. Bit of a duh moment.

@AnthraXaXis Год назад

as usual, awesome review Mr Burns! how would you compare this little ripper to the darwinfpv tiny ape fr? I've been loving the tiny ape, bashed the heck out of it and am still only on second set of props. some slight flaking of the carbon frame by the camera due to a nasty crash into the trampoline, but it's held up to my abuse thus far! cheers, have fun and stay safe!

@NickBurnsFPV Год назад

IMHO this is more agile and likely noise friendly for those that need to be more discrete when flying. I have a bias for smaller quads with the flight performance I am looking for. I felt the tiny ape didn't respond as quickly as I would like, it flies well just that little extra response I like. Makes flying in tight spaces at speed a bit more easy and I feel more connected to the flight when it responds as I like.

@AnthraXaXis Год назад

@@NickBurnsFPV cheers Mr Burns, appreciate your insight! I absolutely love the way the tiny ape flies, though I am a noob so I don't have much to compare to! I might have to give myself an early bday present with one of these 😊 happy flying!

@wmcewa01 Год назад

Looks like an added 10+ grams going from analog to DJI - but same motors. Hard to imagine that will fly too well.

@NickBurnsFPV Год назад

I suspect it will be much more tame. Probably could use 1102 and tri blades to wake it back up...

@trystan4358 Год назад

this quad can also save weight a few places

@calmarcalmar 11 месяцев назад

What might be the difference, between this Firefly Nano 2s - vs. a Meteor85 2s? The Firefly might be a little more powerful and that's it?

@loaderqsf Год назад

Love your videos and your flying... I just started flying 6s fpv quads a few months ago but have been flying the dji mavic line up for about 3 years ... I purchased this little Firefly Nano Baby 20 a few days ago and ive seen so many suggestions on when to land in videos and on the web and everyone says something different.... I noticed in your video you went down to 3.4 volts but you also said you should of landed a bit sooner ... So should i be landing at 3.5volts then or can i safely go lower ?

@NickBurnsFPV Год назад

For me it’s a timing specific. I want to land and disarm, then I want the battery to recover to 3.5volts/cell. Micros are different than bigger quads, our batteries are smaller and they tend to go down pretty quick when we start to fly but they also recover when we disarm.

@snapgarrett1 Год назад

I like this a lot. the camera is a bit iffy but acceptable. I think I would have been happen with a run cam nano 4 on it.

@slackerinmotion Год назад

Hi Nick, do you think these motors might be under-power for the DJI or the Walksnail versions or a heavier battery? Or a set of 1202.5 @ similar kv may be more adequate for the digital versions.

@NickBurnsFPV Год назад

I do worry that if we add weight we will see the crisp flight get slower more sluggish. A larger motor would likely offset that

@doodgeslagenmug Год назад

Great video Nick! I wish i could get this in europe because this one is amazing.

@NickBurnsFPV Год назад

Can't order from flywoo direct?

@doodgeslagenmug Год назад

@@NickBurnsFPV i can but i don’t have a credit card, i can only pay with ideal but i was wrong as i can get it from aliexpress :)

@sapata1871 Год назад

Nick , love your videos. Do you think the A75X would be compatible swap (frame wise) Nano baby? (,caddx )

@NickBurnsFPV Год назад

I believe the A75X runs 3s. That would mean even if we swap the frame the frame isn't thick enough for the additional weight of 3s batteries. I suspect it would break on at least some crashes. I have seen the frame break as a bnf.

@sapata1871 Год назад

@@NickBurnsFPV Thank you very much. Happy Holidays

@Monkey_D_Cluffy 11 месяцев назад

So I just got this quad (in analog) and I’ve heard so many praises on how it flies. @nickburns do you think it’s not worth trying tri blades instead of bi blades? I want something than can do some mini sbang and a park/tree ripper.

@NickBurnsFPV 11 месяцев назад

I have tried 2inch triblades on 1002 motors. Not a good match, sluggish performance and short flights

@ProjectMockingbird Год назад

William just sent me one of these, so I'll be working on an Emu tune...I'm guessing it was on BF 4.3? So happy we are seeing 2 inch 2s...I might have mentioned it a million times to William. :P

@NickBurnsFPV Год назад

Nice, glad they are going to get one in your hands. I think it was BF4.2.2 or something just short of 4.3. Not with it right now :) Ah so you have the magic touch to bend the manufacturing ears. Nice and thank you!!

@RookieRay Год назад

is this too powerful to fly inside?

@johnk8825 Год назад

Prices for all are up on Flywoo, all 4 versions. Analog from $170, HDZero and WalkSnail from $290, DJI from $300. And the DJI version appears to use the same canopy.

@jeanfrancoisvandiest9729 Год назад

great video nick 😁👌

@NickBurnsFPV Год назад

Thank you

@cccagley5276 Год назад

I too am glad to see another 2s 2inch backyard quad. Except for whoops, I strongly prefer 2s vs 1s. As light as I build them, the 1s just always feel sluggish. With these 1/2s micros there is only a small weight penalty going from 1s to 2s with a much larger increase in thrust and responsiveness. Just my opinion.

@NickBurnsFPV Год назад

I can certainly agree with that.

@Eklectickuts Год назад

Looks like Remade diatone cube in my opinion, which was and still is a great quad

@NickBurnsFPV Год назад

I can see that. That diatone cube frame was super ridged, it was an unusual vertical cube.

@pirateradioFPV Год назад

Peppy ^^ . . I've been looking to build a 2" 2S too, they're probably ever so slightly less sensitive to weight compared to the 1S stuff.

@NickBurnsFPV Год назад

yes, and the throttle response is what I like in flight feel. 1s just doesn't have that same crisp flight feel

@pirateradioFPV Год назад

@@NickBurnsFPV 😁

@jbagodonuts8088 Год назад

how long before a kwad goes for a swim ?

@RCOverKill Год назад

Probably not a good idea with micros, but I fly in long grass that wraps around the motors, if I can flip it, I leave it in turtle mode and yaw back and forth 3 or 4 times, and that usually releases it, ut that's a 5 inch.

@NickBurnsFPV Год назад

yea, with 5inch esc they have far more overhead and robust esc. I wouldn't suggest that with a micro or lower margin esc.

@2002LJH Год назад

After seeing your comments I made my Mobula 7 based TKS rocket into a 2S 2" toothpick using the Quad 666 Sky Ryder frame. I was going to use the RcInPower 1002's but saw a number of reports that said they were not terribly efficient and the stated KV's were not close to what they really were. Because I this I went with HM 1102 9K kv (I wanted 10K but could not find them at the time) and I use the same Nanotech battery you use. I have been using them for many years on some of my small fixed wing stuff and they do perform well.......With all that being said I LOVE my 2" but was wondering how this performs compared to your 2S TKS Rocket Race builds? I am surprised that I am regularly getting 5 minute flight doing some pretty hard ripping and the things goes pretty darn well.

@NickBurnsFPV Год назад

The flight characteristics are very close but the main difference is the RR has the 1102 which run the tri blades better than 1002 can. The tri blade crispness and responsiveness gives the rocket race the edge for me.

@propsoff Год назад

Trying to catch-up. Been busy Nick...👍🏻🍻👊🏻

@stewarthanson2931 Год назад

Hey Nick- great review as always. I have a question for you- I want to get the PNP version and I have a Flysky FS-I6X radio ( AFHDS 2A) what would be a good receiver for this quad? Thanks Nick. Much appreciated.

@NickBurnsFPV Год назад

We will want something small as there isn't to much room, with that I also haven't flown or connected a flysky reciever in a number of years. The flysky FS-A8S v2 is small, I did use it once years ago and it seemed to work fine, but I didn't test range. There very well could be something smaller and better.

@stewarthanson2931 Год назад

@@NickBurnsFPV Thanks Nick- also would I be able to use Betaflight with this quad and my Flysky radio.

@NickBurnsFPV Год назад

@@stewarthanson2931 Betaflight is on the quad already. I presume flysky will work as long as we get the PNP and add a compatible flysky receiver.

@stewarthanson2931 Год назад

@@NickBurnsFPV Thanks Nick- I really appreciate it

@chris2fers678 Год назад

which elrs firmware do we use to flash to this quad mine came with "DIY 2400 RX ESP8285 SX1280" on it but on a video JB did he flashed "Flywoo EL24P 2400RX" so do i use the firmware in the DIY TAB "DIY 2400 RX ESP8285 SX1280" OR as JB showed "Flywoo EL24P 2400RX" from the flywoo tab in ExpressLRS configurator?

@NickBurnsFPV Год назад

both should work, many of these receivers have the same design, the reference target for many micro elrs rx is the DIY 2400 ESP8285 SX1280

@chris2fers678 Год назад

@@NickBurnsFPV thanks, a bit of a learning curve flashing elrs,hdzero tx,rx upgrading to edgetx all at once.

@NickBurnsFPV Год назад

@@chris2fers678 agreed, gets easier each time we have to run through the process.

@Nimbus2k23 Год назад

Would you consider this to be the best 2S front/back yard ripper that is BNF?

@NickBurnsFPV Год назад

I think its one of the top 2, between this and the bassline

@UAV-AP 4 месяца назад

Hey Nick, can you link or send me what the best props you would use for this model please 🙏 thanks love your reviews

@NickBurnsFPV 4 месяца назад

The best props are those it comes with. If you change props you will likely need to change the pid tune as well to get it to fly as well compared to the stock props and pid tune.

@chrisbee5481 Год назад

Hmm. Angry Don has been the real pioneer with these 1 and 2 S micros. I know your TKS rocket race 2S is legendary. Built three rocket race myself. After my 1s 1002 build the 2S doesnt feels like any benefit over the 1S in flight performance because of the extra weight. Kinda exactly what Angry Don has been testing and said too. But of course now you can go digital and carry an extra cam on 2S. Looks really good but somehow kills the idea of ultra small 1002 and light weight 1S for safe garden rip'in

@NickBurnsFPV Год назад

I am in the other corner, outside of whoops I prefer 2s over 1s when prop size is the same

@KOrnhOliO1 Год назад

@@NickBurnsFPV Agreed! No comparison. 😎🤘

@BallPingFpv Год назад

I love it I seen a spark in your eyes no joke it's nice to see that you deserve it Nick you really do you have put in a lot of work that didn't benefit your self and has helped god only now's how many!!p.s flywoo how come you guys have gotten Nick those HD version for testing seriously if anyone has the knowledge to properly and correctly run the HD versions through all the proper testing and spec's as he did with the analog version..... Thanks Nick !!!

@sixtofive Год назад

Oh man! I'm really tempted to just order one and ask for forgiveness later... 😂 At least someone is still producing good stuff for those of us analog hold outs. I think that extra battery holder you mentioned may be the one that fits 450 - 720 size batteries. If not, and if it comes with 2 by default, you could always resize one of the holders by applying heat and letting it cool around the larger battery. This thing looks impressive!

@NickBurnsFPV Год назад

Yes, the other battery holder is for the larger battery. I completely missed that detail. I suspect micros might be one of the few spaces to be analog heavy as the additional 5-10+ grams isn't micro friendly until we get to 2.5inch prop sizes, or we have to start flying 4s batteries on them. And on 4s batteries it takes some of the micro feel and features away, noise, weight and agility.

@gmivisualsjason3729 Год назад

Excellent video...... think I might buy this....

@NickBurnsFPV Год назад

Curious about the image stability of an external hd camera. Need to get the mounts and go for a spin

@babyzeefpv9887 Год назад

Is there any way to improve the vtx signal/quality with this? I’ve had soooooo many problems with this product.

@NickBurnsFPV Год назад

the basics, antenna, receiving module and its antennas, environment...stay away from rf interference. Also try flying raceband 8

@alanpaul3551 Год назад

Nice review bro🙏..how is the power?is it suitable to fly indoor?..how is the power compare to your's mobigital7? please advice...thanks🙏

@NickBurnsFPV Год назад

Very subjective. I wouldn't fly this inside unless like a warehouse or some industrial inside space. Exposed props can do damage in many indoor spaces. This is much more responsive than the mobigital. More power as well.

@slowentropy4531 Год назад

Really reminds me of the glorious old LarvaX frame just a smaller form factor.

@JohnCuppi Год назад

Same! :)

@slowentropy4531 Год назад

@@JohnCuppi Good to see you here my friend:)

@Quad66 Год назад

Out of curiosity can you try the quad on 1S? The board is listed as 1-2S input voltage/ESC in the specs. On 1S I can’t get the motors to spin up properly on arm, lots of stuttering pausing even what should be reasonable idle settings. I tried maxing out the ESC settings and didn’t help either. Given the layout/weight it would be weird for this board not to be 1-2S.

@NickBurnsFPV Год назад

I wouldn't do more than hover it on 1s. I suspect the motors might not be 1s compatible in the scenario you mention.

@ludofevrier5593 Год назад

@@NickBurnsFPV hi Nick this motors fly very well in 65mm props 1s... Maybe it s not so bad on 2' 1S😉

@NickBurnsFPV Год назад

@@ludofevrier5593 I have tested 1002 motors on various props and kv here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-rG-zSomfjpc.html this kv on 1s on 65mm props would be a slow cruiser.

@ludofevrier5593 Год назад

@@NickBurnsFPV yes agree... I like fly in my street on the night (silent is importante) ☺️ so +5min fly time I like this

@anthonycadejr3995 Год назад

Hey Nick which would you prefer for a everyday flier at a small park this or smart 16 by geprc. As far as longevity, durability and availability of parts smart 16 has a stack so it's cheaper to fix right? But need your expert opinion 😏 I was about to pull the trigger on smart 16 but this video came out . Do you know anymore 2inch 2s coming out. And if you can't talk about it should I wait?

@NickBurnsFPV Год назад

For flight characteristics, I much prefer the nano baby 20. If there is a failure the cost to fix/replace is about %50 less as we have separate components. I don't have any information on other 2inch 2s coming, but when there is 1 there is generally more on the way...could be 60 days before we see it though

@anthonycadejr3995 Год назад

Thx for the answer I'm only worried the durability with 1.5mm frame on smart16 but the fixed angle is why I wont pull the trigger and the way USB is the canopy is hard to replace with the uz85 canopy I have but thinking of cutting back and mounting with three screws and a ant lite camera but worried about weight thx what you think 🤔

@NickBurnsFPV Год назад

@@anthonycadejr3995 The weight of the ant lite is micro even with the screws only those most experienced flyers will feel the 2grams that adds.

@wesrgrant Год назад

Thanks for the great videos! They’re gonna put DJI on that little thing??? I must have misheard that.

@NickBurnsFPV Год назад

They are and they have it listed on their website now too. Its $300...ouchy

@sunsetpark_fpv Год назад

Awesome review. I was REALLY interested in this little guy - until I went to Flywoo and saw the price - yikes! The analog model isn't so bad but the HD Zero w/ CRSF nano is $319 😮

@NickBurnsFPV Год назад

Yep, hobby keeps getting more and more expensive. Some brands more than others.

@MrChangCJ Год назад

do you think this would fly with a 1S? perhaps for indoor use?

@NickBurnsFPV Год назад

I am not sure it will do much more than a very slow cruise, indoor poses risk as it isn't prop protected.

@un_ours_blanc Год назад

Great review Nick ! I'm glad manufacturers come to understand that 1s micro quads are not the only solution, that a little bit more power in a small form factor is also fun and that people want that. I will not be able to afford this at the time, but I have a Crazybee F4 3S board that is coming for my UR85, a little 85mm rocket that is so fun to fly, and I still have my mobula 6 that I'm gonna try with a meteor65 frame.

@NickBurnsFPV Год назад

The rocket race I reference in this video was a quad I used most of the components from the ur85 on.

@un_ours_blanc Год назад

Nice combo :D I'm thinking of putting my ur85 components on a deadbat frame that I bought, but it's so good as is that I'm hesitating

@NickBurnsFPV Год назад

@@un_ours_blanc yes, the desire to tinker vs enjoying what we like 🙅‍♀

@parker1ray Год назад

I will tell you quite honestly, I use digital for photography and mostly analog for straight flying! The benefit to analog is way way way cheaper! I am talking another $100.00-$150.00 for HDZero. That is why I only own two of the expensive BNF little gold bricks!

@ChrisHarmon1 Год назад

I have the DJI version and within 10 flights indoors I lost a motor. No big deal, $13 later it was replaced. About 10 flights go by and it falls out of sky from about 5ft and lands in grass with no damage. Never been crashed besides the 2 motor failures and no other damage. This time it's the ESC and it's taken another motor with it(same side one as before). Currently talking to Flywoo and hoping I get a replacement board. While looking at prices I saw a review for the Goku F405(Firefly DJIs AIO) where a guy received two in a row with bad ESC. I'm wondering how many others are out there...

@ChrisHarmon1 Год назад

Forgot to mention that the motors after a flight are ice cold. Firmware has been stock and betaflight is all stock except rates turned up to 925 on roll/ele/rud with zero deadband. I fly fast circuits around my house with 18g to 30g packs. Quad without packs weighs 62g and I fly 2s packs weighing up to 30-31g but most are 19g to 28g.

@NickBurnsFPV Год назад

I haven't had to many comments on this one in the real world. Thanks for coming back to post your experience. I hope they had a temporary QC issue. Flywoo is typically fairly reliable.

@PropDusting Год назад

Is the battery tray marked as to what battery size that it is made for?

@NickBurnsFPV Год назад

It is, I completely missed that.

@BrandonBeans Год назад

Might try turning the TPA value up a little. Like, if its 0.65, then try 0.70

@NickBurnsFPV Год назад

I haven't tested, but yes its at .65. I will give .70 a go. Thanks for that.

@redtailaerialimaging8983 Год назад

I just got mine in the mail (from your affiliate link)…. My goggles V2 will not bind to them. DJI assistant will not recognize them either to update. Any ideas? Should I go back in firmware on the vista?

@NickBurnsFPV Год назад

The vista will need to be activated/registered to bind.

@redtailaerialimaging8983 Год назад

@@NickBurnsFPV I did that in DJI assistant. Says it’s current :/

@NickBurnsFPV Год назад

@@redtailaerialimaging8983 Are the goggles on the the most recent version too? Another item: we can't bind when them when either is usb connected.

@redtailaerialimaging8983 Год назад

@@NickBurnsFPV I went back a version with Vista and it binded no problem! Still can not get Goggles in to assistant thought. At least I was able to fly it, super cool little quad!

@mjanusic 8 месяцев назад

How does it compare to Happymodel Mobula8?

@NickBurnsFPV 8 месяцев назад

I prefer the bassline to this especially if the space is the same size as my backyard. The mobula8 flies as well as this but the frame tends to get damaged more than I would like

@mjanusic 8 месяцев назад

@@NickBurnsFPV Thanks for replying. I want a whoop with prop guards, and from what I can see there are no prop guards available for Bassline. That is why I am considering Nano Baby 20 or Mobula 8.

@underhog5275 Год назад

So flowy, like 5" 😳

@hristiantodorov3923 Год назад

Would it be possible to fit a HDZero Nano camera inside that canopy ?

@NickBurnsFPV Год назад

I think we would have to glue or secure it with tape, I don't believe the pressure fit will work as the lenses look to be different sizes.

@ludofevrier5593 Год назад

Hi try to put out the lense and re fit in I think it s possible (excuse my english)

@eliasreichenbach Год назад

Do you prefer the the tks rocket race ?

@NickBurnsFPV Год назад

I do prefer the rocket race

@ChuckLeone Год назад

You’re the second reviewer I’ve seen for this quad that states it came with a 750mhA that was too big to fit it. I wonder if they forgot to bundle in a larger battery holder? Why would they pack in a battery that won’t fit?

@NickBurnsFPV Год назад

turns out the battery holder in the bag was for the larger batteries like the 750mah they sent. I missed it completely.

@american7169 Год назад

Try gaffing tape sometime. I might get 1 of these for myself as early Xmas gift. Swap the antenna and might fix the signal, just a thought.

@NickBurnsFPV Год назад

Isn't gaffing tape fuzzy? If so I have tried it and didn't like how dirt and debris would collect on it.

@american7169 Год назад

@@NickBurnsFPV not that I've ever seen. It's pretty smooth and super tough. I use it because the tape lasts way longer than the motor wire tape that comes factory but looks the same, just a couple thousandths thicker and better adhesive properties.

@JOJO-ly7dc Год назад

Do u prefer the flywoo over the TKS Rocket Race?

@NickBurnsFPV Год назад

no. I prefer the rocket race, the tri blade props and response of those props with 1102 is a touch better.

@JOJO-ly7dc Год назад

@@NickBurnsFPV ok thank you

@jonathangilpin193 Год назад

I have a few flywoo drones have to say I love them all

@NickBurnsFPV Год назад

I have been pleased with the reliability and performance of flywoo products

@EdturdEnfart Год назад

How do you compare this to the rocketrace? Is it better or worse

@NickBurnsFPV Год назад

I like the rocket race better. The tri blades make it corner like I like. 1002 struggle to run 2inch triblades

@JuelzFpv Год назад

2s never left, ya just gotta off the hype train.

@NickBurnsFPV Год назад

I have been trying to keep the hype going? Manufacturers took nearly two years to get them going again 🤣

@modquad18 Год назад

Tinyhawk 2 race seems like a better option in this space, once you replace bat connector with an xt30. Much better cam that’s adjustable.

@KOrnhOliO1 Год назад

Proprietary parts make ANY Emax micro a no buy for anyone who doesn't want to get totally screwed! Having to only buy their motors and AIO board, at outrageous prices, and not being able to use parts you already have, makes Emax micros a very bad deal. No one else does that! Plus, that board they use is notorious for burning out, and it's ungodly expensive. 🙈🤷🤬

@modquad18 Год назад

@@KOrnhOliO1 Hmmm, I’ve been flying 4 of them for at least 2 years and never had a board failure. And they’re cheaper than this board. Odd that your experience was different.

@KOrnhOliO1 Год назад

@@modquad18 not just mine. Many!

@modquad18 Год назад

@@KOrnhOliO1 Wow, that is so weird Scott. I fly the heck out of these things and the only board failure I had was a cracked solder joint that was easily repaired. And that happened in a super hard crash into a fence post that sheared the cam connector off the board, so had to direct solder those wires. I do install XT30’s right out of the box. What’s failing on the ones that you’ve had, or heard about?

@KOrnhOliO1 Год назад

@@modquad18 not sure, but I think it's burned up ESC's.

@Super_Mario_Fpv Год назад

Did I smoke the wrong crack this morning? $300 for a hdzero micro?

@NickBurnsFPV Год назад

Pricey right? It’s not 2019 anymore 🤷🏻‍♂️🤑

@KOrnhOliO1 Год назад

Consider your mind officially blown! 🙄

@Dieselshroom Год назад

Agreed! That price is steep. You would be better off buying the analog quad and a HDZero whoop lite bundle separately. Their margin on the HD versions seems much higher than the analog version.

@FredCharlebois Год назад

So judging by your reaction and comments I guess this is not a one to one replacement for the TKS race rocket. That big antenna hanging on top and dragging in the wind could be changed but at that point if you need to change one thing might as well build it from scratch yourself.

@NickBurnsFPV Год назад

Its very close to my favorite little outdoor micro the rocket race. The difference is the smaller motors really don't push tri blade props to well, and I like that prop feel and crisp flight characteristics.

@valden Год назад

@@NickBurnsFPV the kv on these seemed too high but now I think I am going to have to try 1102 13500kv with biblades and see how those go vs. the 10000kv with triblade 👍

@NickBurnsFPV Год назад

@@valden It will have more top end speed and somewhat less flight time. Kinda just how kv works on the same prop and motor size....and overall quad weight

@friede88 Год назад

The printed battery strap has the number 420 imprinted, no wonder that the 750 won't fit :)

@NickBurnsFPV Год назад

Dang sorry I missed that. I noticed it said 420 but thought it was some sort of marketing

@marlowright183 Год назад

Is the camera fixed?

@NickBurnsFPV Год назад

yes

@jasontheriault1083 Год назад

1d forever

@billmcdonald4335 Год назад

We _had_ a killer 2", 2S whoop - for cheap, too. Using Bluejay 0.16 and BetaFlight 4.2.9 I have one flying as good as this class gets [indoors, in Angle Mode, at least]. Unfortunately, the company stopped production of 'em in 2020. Great unit, but fitting digital on it would be nigh impossible. This new drone looks really nice, and the price of the analog version ain't too shabby. It's made my short list of what to get next, for sure.

@pgabrieli Год назад

which one was this killer drone?

@billmcdonald4335 Год назад

@@pgabrieli King Kong/LDARC ET100.

@1101nz Год назад

My et100 was way too heavy and insanely loud.i didn't like it.

@billmcdonald4335 Год назад

@@1101nz Mine's still around 100g AUW, but I've installed an XT30 power cord, mounted the hoops _under_ the frame, trimmed every other spoke from the hoops, installed the camera between the front hoops, and tuned the guts out of it. Its a lot quieter, and flies almost perfectly. Right now, I'm putting it through its paces in my front room [about 10 x 20 feet]. I have 5 tripods set up in a sort of jungle gym, and I'm havin' a blast. Best flyin' ET100 on the planet, if I do say so myself.

@Sfpv1994 Год назад

With all those new digital options i Do not know what to invest in.... hdzero? Walksnail? Flying mainly your types of drones....3.5 inch at Max

@NickBurnsFPV Год назад

It is a rough decision for sure. I am happy having fun with analog, but I appreciate HD. If I couldn't pick more than one I would likely go hdzero.

@pricelessppp Год назад

I Still like analog DJI is too expensive.

@Sfpv1994 Год назад

@@NickBurnsFPV thanks for your reply. Just for weight purposes?

Год назад

All you need is one good quad so make it the best you can instead of wasting money and time on owning many different quads. Hdzero is good it's like having perfect analog. Just wait a couple months and see where walksnail ends up.

@xORLOCKx Год назад

With walksnail coming out with a 1s VTX it's making me consider switching from DJI v2. I run an analog adapter on my DJIv2s so I can enjoy the best of both worlds at the moment. But a digital micro would be nice.