Finecut not cutting through? Here is how to fix the problem. Hypertherm 45xp DIY plasma cnc

Подписаться 2,3 тыс.

Просмотров 13 тыс.

50% 1

One of the biggest issue with the Hypertherm Finecut consumables is not cutting through. Even doing everything by the book they still have problems. Here are the steps I went through on my diy plasma cnc to troubleshoot and eventually fix the issue.

Опубликовано:

22 авг 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 17

@johnw4590 Год назад

Good video and appreciate time to share. I will try increasing the distance.

@joell439 2 года назад

wow - great summary

@Mickaleb 10 месяцев назад

When I use the 220857 part on my cnc machine it doesn't create an arc and makes bursting sounds, but when I use 220947 it makes an arc but doesn't pierce the metal on finecut

@robertfigueroa2313 Год назад

Thanks for the help it will comes in handy

@LittleAussieRockets 2 года назад

Thanks mate 😃 👍

@user-wg7on1lh8k Год назад

Thanks for the video, will definitely give it a go... Just wondering have you had issues with the torch dragging across the steel...?

@rodneycassidy6037 2 года назад

Thanks

@dimonkrasov4579 2 года назад

Do you use a dehumidifier, which one do you use?

@dimonkrasov4579 2 года назад

Hello! What is your arc voltage at a height of 0.08?

@Funkyflykiwi Год назад

Hi. Are the cut charts your using for the hand held torch of the machine torch? There is a difference

@elianmorales674 2 года назад

Hi you cut stainless steel in you plasma ?

@cameronmichaelaggas 2 года назад

Any videos of how fine of cuts you are getting?

@projectswithrich22 2 года назад

I may do a video in the future on more cutting. I did compare the fine cuts to the standard nozzles and the fine cuts do have a finer cut. I cut detailed parts and I wasn't able to get the details with the standard nozzles.