Finishing Kitchen Cabinets! Ram ProMaster Van Build Conversion - Episode 18 | Jason Klunk

Подписаться 13 тыс.

Просмотров 12 тыс.

50% 1

This week I got both of my lower cabinets installed. I was also able to get the butcher block all cut up and installed as well. The oven is fitting really nice, I’m excited to get the propane lines run so we can get this bad boy fired up. The sink turned out really nice and I’m stoked with how the gold hardware/faucet is looking in the van.
As you can tell, I have some electrical done and also did some work on the back walls. That stuff will be coming in future videos, so stay tuned. Yewwwwwwwww!
#vanbuild #vanconversion #rampromaster #campervan #dometic #cabinetry
VIGO Bavaro Stone Vessel Sink: amzn.to/3lNXo6T
Stone Sealer: amzn.to/36eklei
Excel Tankless Gas Water Heater Vent Free: amzn.to/39n1MGO
Dometic 970-Series Portable Toilet: amzn.to/37dhVMm
Gold Pop-Up Sink Drain: amzn.to/3fOBzCk
Simple Drain: amzn.to/39l4yw5
3M Thinsulate SM600L: amzn.to/3bwgKba
Renogy 160 Watt Solar Panels: amzn.to/2LXomZP
Renogy Lithium Battery 170 AH: amzn.to/3mkCQUu
Renogy 2000W Inverter: amzn.to/2H1bmD9
Renogy DCC50S Charger w/ MPPT: amzn.to/32sBejp
Makita Driver Drill: amzn.to/3ekL2jq
Miter Saw: amzn.to/2yoZ8A3
Dewalt Safety Goggles: amzn.to/2xsnNDo
Makita Track Saw: amzn.to/3hZGcZU
Kreg Pocket Hole Jig: amzn.to/2XjG67Q
Dometic R31 17” Oven: pantherrvproducts.com/copy-of...
Dometic CRX 1080 Fridge/Freezer: pantherrvproducts.com/dometic...
Push To Open Drawer Slides on Amazon: amzn.to/3hLrJjX
Centerline Push To Open Drawer Slides: www.rockler.com/centerline-li...
HeatShield Windshield Shade: amzn.to/34DDHJF
Instagram: / jasonklunk
Epidemic Sound: www.epidemicsound.com/referra...
Tesla Referral: ts.la/jason55632
Main Camera (Sony A7III): amzn.to/36AVy1c
Main Lens (Sony 16-35mm Vario-Tessar T FE F4 ZA OSS): amzn.to/2P4fkeN
Manfrotto Tripod w/ Fluid Video Head: amzn.to/2MLyNjW
Rode VideoMic NTG Shotgun Mic: amzn.to/336tEe7
DJI RSC-2 Gimbal: amzn.to/3vtrEbU
Mavic Air Drone: amzn.to/2EdfGeK
GoPro Hero 7 Black: amzn.to/2GuBFA7
Lighting: amzn.to/2FiksIX
I am available for van build consultation calls if you have questions on your build. Find my email in my bio and send me a message: / @jasonklunk
Music by Qveen Herby - Mint - thmatc.co/?l=7878A1D
As per the Amazon Operating Agreement, I am a participant in the Amazon Services LLC Associates Program. As an Amazon Associate, I earn from qualifying purchases. This is an affiliate advertising program designed to provide a means for this content to earn advertising fees and commissions by linking to Amazon.com and affiliated sites. This is at no cost to you, thanks for your support.

Опубликовано:

25 ноя 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 54

@vinceocratic 3 месяца назад

Sick color scheme!

@JasonKlunk 2 месяца назад

🙏

@johnmca5643 3 года назад

The van is looking sweet! I'm really looking forward to the finish project.

@JasonKlunk 3 года назад

Thanks 👍

@thewestpost Год назад

good looking man, I will do exactly your way, great job!!! I subscribed. i will be asking question soon. 😀

@JasonKlunk Год назад

Awesome! Thank you!

@renxo909 3 года назад

yeah dude!!! ur van is starting to take place so well

@JasonKlunk 3 года назад

Thank you! It’s very exciting to see it come together

@luisacevedo324 3 года назад

wow Jason. Awesome built I’m loving your design pics you did very very nice and elegant way to go brother good luck

@JasonKlunk 3 года назад

Thanks 👍

@sarahdotkrause 3 года назад

Looks great, love the colours

@JasonKlunk 3 года назад

thanks!

@MsRotorwings 2 года назад

Not having a toe kick would drive me nuts.

@sarabeth3016 3 года назад

Another option for tiny sinks that won't need to be sealed or resealed are bar sinks. Made of metal and function just like kitchen sinks, but smaller! I'll most likely be using one in my future can to save on weight and avoid worrying about maintenance on the stone :)

@JasonKlunk 3 года назад

Definitely, bar sinks are a great option too

@heathers_home_videos Год назад

How has the hot water heater held up? I like the placement for outdoor showers! 👍👍

@JasonKlunk Год назад

Still going strong!

@noodles.dumplings.kimchi2878 3 года назад

great sink!

@JasonKlunk 3 года назад

thanks, I like how it turned out too

@andymcao 3 года назад

Jason, could you share a bit more color on how you built those beams to cover up the metal pillars? Loved how they turned out with the outlets and switches on them. The wall behind / adjacent seems to curve relative to the front surface of the beam, so curious how you trimmed the side panels so they would be flush against both the front panel (with outlets) and the back wall.

@JasonKlunk 3 года назад

Thanks. They were a bit tricky to make, but it's like everything else in the van, you have to learn how to scribe and create templates. For the side pieces, I did one at a time with cardboard. I started with the back/curve, got it to fit nicely against the curve, and then cut the piece to the right depth. Repeat for the second side, and match the depth. The front is easy, it's just a matter of squaring it up.

@andymcao 3 года назад

@@JasonKlunk Thank you! Love your videos - been a huge help for me as I build my 159" WB promaster.

@dovsolomont3394 2 года назад

Hey, awesome video thanks! Did your drain come with the sink or was it separate? If so could you send a link to it please 🙏 thanks!

@JasonKlunk Год назад

Everything should be in the description

@chrisweinlich8154 3 года назад

Hey Jason, Have loved watching your van build, you’re providing me with lots of inspiration and guidance as I convert our sprinter into a tiny home on wheels. Just wanted to know how you secured your cabinets to the van? I love how much you’re getting the most out of your Kreg jig, so I assumed this would be the method? Thanks again for your detailed videos! Love your work!

@JasonKlunk 3 года назад

thanks. The cabinets are secured to the floor and to the wall. I used pocket screws in some spots but also just regular screws in areas where I could.

@sibelcuriel7976 2 года назад

What’s the name of the green color you guys chose for the cabinets? I’m planning on doing green cabinets and really like how this one looks.

@JasonKlunk 2 года назад

Thank you. Yorktowne Green - Benjamin Moore.

@ChristopherBalladarez 3 года назад

Do you know or remember how many pieces of the birch you used to build all of your cabinets? Thank you for everything!!!

@JasonKlunk 3 года назад

sorry I don't remember the exact number

@DahBahamaLlama 3 года назад

Jason, your videos have been a huge help. I was installing ceiling furring strips today and used your craft paper tip. Also created a furring strip for the front of the van in the same way you showed. Clutch! I had a couple questions - Do you have any tips for finishing the area where the Promaster wall juts out in the middle of the van? Also, did you panel the back or top of your upper cabinet after attaching them to the furring strips? Thank you, I hope you are enjoying the van!

@JasonKlunk 3 года назад

Awesome. I ended up building small 'beams' to go over those pillars, they sit in between my uppers and the butcher block. I ran most of my electrical through those pillars and then on my beams I have light switches and outlets. I paneled behind the uppers before I put them up. If I were to build another one, that's the only thing I would do different - find a better way to panel that whole wall.

@DahBahamaLlama 3 года назад

@@JasonKlunk I appreciate you!

@cimbra1550 2 года назад

Can you share how you anchored the cabinets to the floor/wall? Of all the videos out there, none show how that part goes… Thanks!

@JasonKlunk 2 года назад

Sure. I used normal screwed to go into the furing strips on the walls. I also used pocket screws to go into the floor.

@annadavidsmith9971 3 года назад

Question for you! We just purchased a two burner stovetop / oven combo from Thetford, and are curious if you added any kind of insulation layer between the oven itself and the surrounding plywood on the cabinets or backwall?

@JasonKlunk 3 года назад

No, I was concerned about that as well though. There are very specific requirements for installation that I followed with my model, I'm sure yours is similar. You basically don't want gaps between the range and any surrounding cabinet, no combustible material next to the range, and make sure you have enough clearance above. Here's the documentation on mine: www.dometic.com/assets/31/72/installation%20and%20operating%20manual_63172.pdf

@paulreyes660 2 года назад

Thanks Jason! Your van looks amazing. Thank you for the detailed instructions. I watched all your videos. By the way, what color is your kitchen and sink cabinets?

@JasonKlunk 2 года назад

Thank you. Yorktowne Green - Benjamin Moore.

@loriwalker-brandon9163 2 года назад

I was loving that color too - something soothing about it.

@max4296 2 года назад

What did you use to secure the stone sink to the plywood base? Adhesive or mechanical?

@JasonKlunk 2 года назад

No adhesive, it’s locked in tight between the cab and the countertop.

@andrewbrowning9329 Год назад

Hey Jason, great build! I'm from the UK and I love your worktop. What wood is it made out of and what thickness?

@applecoreseeds 3 года назад

Hi, we love your build & colour choices. We noticed that the Vigo vessel sink is advertised as non-porous, but you mention needing to seal it because it's porous...can you clarify please?

@JasonKlunk 3 года назад

Thanks. From what I've seen in person, it needs to be sealed. You can test it out yourself on a piece of the sink that won't ever be visible. There are other people using the same sink who suggest a sealant as well.

@applecoreseeds 3 года назад

@@JasonKlunk Thank you so much for replying! I think we'll seal it just to be on the safe side :) On another note, how have your push to open drawer slides worked out for you? We're looking into those as well!

@vilayvanh1531 3 года назад

Hi Jason, Amazing van build!! We’re building out a similar size van and was wondering if you would share where you got the butcher block from and the size/dimensions?

@JasonKlunk 3 года назад

I ordered my butcher block from Lumber Liquidators. It's a piece of Maple that I cut down to size - 1 1/2 x25 x 8 lft www.llflooring.com/p/williamsburg-butcher-block-co.-1-1-2-inch-x25-inch-x-8-lft-maple-butcher-block-countertop-10006983.html

@vilayvanh1531 3 года назад

@@JasonKlunk thanks so much!