These racks are still going strong. Working on the second batch of firewood to go through them now! 🎥Here are links to some of the camera equipment that I use: Canon EOS R10: amzn.to/3tvoGYO K&F Tripod: amzn.to/3ZUd2m6 Go Pro Hero 8: amzn.to/3pEGsnV Rode Wireless GO II Single Channel Wireless Microphone System: amzn.to/3GvRoN5 As an Amazon affiliate I earn from qualifying purchases made through links posted here - at no cost to you. More tractor videos here: ru-vid.com/group/PLooz_hclekl-AW--3g0PKompkU3g_bUWv More Firewood Videos: ru-vid.com/group/PLooz_hclekl_7z89asYP8jCEudf-j5fwL More Outdoors Videos: ru-vid.com/group/PLooz_hclekl_sm4OGhndrpyXAZDFRSo6J&si=gu7tPqQ4wY8JmA1G I really appreciate you taking time to watch this video. If you enjoy this type of content, check out some of the following links to support our channel. Check out our website: masterengineeroutdoors.com Please subscribe to our channel here: youtube.com/@masterengineeroutdoors Follow on Facebook at: facebook.com/masterengineeroutdoors
Thanks for the great idea. I used it to make a 3 cord rack out of pallets. I tarped it for now. I'm now scavenging pallets of the size I liked the best (approx 4'x4'). Next year, I'm going to make another 3 cord rack beside the first one and put a lean-to metal roof over it all. I spent about $80, mainly for the tarps at Harbor Freight.
This is genius. There's tons of videos on RU-vid for building $500 wood sheds that hold a face cord. I burn 4 cords a year and just need something simple and effective to store and season the wood. This is perfect for that, and can be expanded as needed.
@@OutdoorsEngineer and when it reaches the end of its life, you can take them apart and burn them as kindling. I'll cut the clean pieces between the nails and split them. The stuff with nails I'll burn in a fire pit. Just make sure to avoid burning anything with MB on the stamp. Then replace em with more free pallets for the next wood rack. Great system!
Good ideas. Pallets are plentiful. Worry is the pallets sitting directly in the dirt though. From my experience in New England, they last maybe only 1-2 seasons. Now I have them elevated up on cinder blocks.
For sure. Although at this point, I built the first one in early 2018 or so, and I'm still on the original palettes. Helps we are in sand country here so the ground drains water well. But there is still moisture. I imagine If I pulled up the palettes, they would be rotten. I probably should rotate in some new palettes on those older racks.
I just cut wood for myself and have tried various ways of stacking and covering firewood. My conclusion is that I hate tarps, for firewood. I've now got some metal pallet racking now in 4ft x 4ft pieces that's great when sat on cinderblocks, but it's making me scratch my head about covering the wood. I think I can drive some small posts in the ground and slide the pallets over them and then add some screws to secure them. The rafters and maybe a couple diagonal reinforcements should do just fine. I keep about 5 cord cut and stacked. Hopefully I can get this done this year and be free of my tarp nightmare,lol.
I like it, I've been using tarps my whole life and they suck. I've been wanting something like this but didn't want to spend a fortune on keeping wood dry.
i made a shelter close to the house entrance so i will have dry wood right there when it is raining or snow on the ground . 2 large pallets for the 2 ends and some horizontal roof pieces also made from waste wood . all it cost me was some nails and a new tarp .
I made one big enough for a full cord. I'm thinking of using T posts as well. I'm making 3 ore all in a row. I used pallets so I didn't have to do ant cutting.
I think it’s great as well even though I find it a pain to walk on pallets especially if you’re stooping under a roof which I do here with a lean to roof that’s too low off of my shop. Would it be easier to have a roof going to the next empty section that you’re not going to fill acting as a brace and then fill the bit without a roof. Put the roof on once it’s filled and move on down the line? I’m looking to build something in the future for firewood and use the lean - to for something else. Great job in making use of what was available. Thanks.
Ha. That's what I get for growing up in North Central Wisconsin :) My first round of "permanent stacks" like this were built in 2017. I am now working to burn that wood, and am able to inspect those pallets. They are in extremely good shape after 3+ years. I think the benefit is they are staying very dry, aside from ground moisture and splashing. I don't think I will have to replace them for quite some time yet.
I scored 3 pallets and 3 sections of wood fencing when my neighbor put up a new fence - I kept some of the old fence from going into the landfill. Planning on building a small 1 pallet sized wood shed behind my garage for my firepit wood. I am putting sides on mine - there are plenty of open spaces between the wood fence planks for air to circulate. I'm down in Milwaukee.
I might be wrong but I guess the vertical level of that wall is not a necessity but even a little bit of extra. Because nevertheless these pallets are quite durable but under the load of wet firewood pallets are going to bend everywhere they have to. So the ° of pallet's tilt must be sooner
For sure that is a consideration. When splitting, I just make sure some of my splits are wide enough to span the distance between the boards on the bottom row.
Thanks! They are the standard 36" width, and I'm pretty sure I cut them to 48 or 50" long. The pallets are 40" wide and I had an overhang of 4-5 inches on either side.
The only time I worry about snow is when we get a pile of it in the middle of the winter. Winter of 2019 to 2020, I had over 3' on the racks and that's when I figured I'd need to shovel them off.
Yes, The old deck on our house had 2x6's for deck boards. WE replaced the deck, but I kept the boards. I would venture to guess that because the 2x6's were rotten, they are about as strong as 2x4's are :) but remember I also spanned 12'.
Yours are a bit different, but I have seen several of these builds with an end pallet to retain the stacked wood. I've never seen it mentioned whether or not the bottom of the upright pallet is physically attached to the horizontal. Are your diagonal braces all that hold them, with the wood applying outward force to keep them in place, or are they also screwed at the bottom? Thanks for your video!
Yes, I am also attached the bottom of the verticals to the horizontal palette using screws. In some of the cases in the racks I have built, I also used a piece of 2x4 to attach them together with screws.
Hello, Would this be a good idea to use as a firewood "drying rack" or having 2 rows of wood makes the drying process a bit slower compared to firewood stand where you stack one row of split wood but air and sun exposure are much better? Trying to find the most effective way to drying the wood without having to move it to storage/shed once it's seasoned. Thanks
I use it as a drying rack and it works well. Keeps the moisture off and allows airflow. Some of the wood on the back side doesn't get as much sun, but that's ok. It dries fast enough. I don't have a wood shed , so my drying racks double as my storage racks.
Certainly. I have noticed that. On my other stacks, I am able to access on both sides. It's not so bad there. These, I have to stack the back row, bent over. Kind of sucks, but it's ok.
Per the chart in Firewood Hoarders its just shy of red oak at 21.6 MBTU/Cord! firewoodhoardersclub.com/forums/resources/firewood-btu-drying-chart.15/ I really need to get to making more videos. I have 3-4 recorded. Just no time to edit
@@OutdoorsEngineer Impressive. Our best is 17.4 with the doug fir, but sometimes lucky enough to grab some yellow birch at 22.1. Quantity over quality though....
Easy. Very Easy. Time. It takes extra time to stack the ends like you are referring to. These firewood racks with pallets on the end are re-usable and I don't have to waste time stacking the end pieces. #2. Your method doesn't allow for permanent cover like the rack portrayed in this video.
Why don’t you learn how to stack firewood without all the bother of making a rack. You can use the pallets as a base to raise the firewood off the ground then LEARN how to properly stack firewood then place your roof on the piles. I stacked firewood my way for 55 years. No problems.
Hello. Thanks for watching. I understand your thoughts 100% and I certainly do know how to properly stack firewood without the use of a rack. The reason I do it this way is 100% because of the amount of snow that we receive. When it gets to become January / February, we could have 2-3 Feet of snow on top of the firewood piles. When I am actively pulling from the pile with just a tarp/roof steel/plywood laying on top of the firewood, and 2-3 feet of snow on top, I got sick of struggling with the snow load. Especially late in the evening when all I wanted to do was grab some wood quick. This was the system I came up with and am happy with it. It will safely old 3-4' and I don't have to worry about me or my wife removing the snow when getting wood in the middle of the winter.
It's his wood and I think this is a great idea what's it matter how it was done in the past? We dont live 55 years ago this drys the wood just as well as you stacked it for all those 55 years and it's only firewood racks hes building it isnt like hes trying to build a house with pallets
