Fitting a Reversing Camera to our Van! | Van Build Ep. 11

Подписаться 17 тыс.

Просмотров 9 тыс.

50% 1

Not as difficult as you may think, just connecting some wires and running cables.
We decided that it would probably be a good idea to get a reversing camera in the new van, we don't have rear windows and well for the sake of £135 we just think it's probably money well spent.
The camera itself is built into the brake light so we just had to replace the old one with the new, no new holes in the van or anything like that just screw it in! (Well, bolt it in)
We decided to get a mirror mounted monitor, we don't have a mirror though lol but we have one on order, it was either that or a screw in dashboard one which i didn't fancy or wiring it into the main radio unit which again was just too complicated.
It's all up and running though so happy gravies, another job ticked off the list!
Thanks for watching and I hope you enjoyed this video, if you did then don't forget to hit the thumbs up button and subscribe to our channel for more great videos every week!
Follow us on Instagram!
/ living_thetinylife
#vanlife #vanconversion #vanbuild

Авто/Мото

Опубликовано:

27 ноя 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 21

@Jaybird88866 2 года назад

You're so good at just taking your time and getting things completed. Again God job!

@sycko80 9 месяцев назад

Good video again mate, you made that look so simple 😁

@LivingTheTinyLife 9 месяцев назад

Yeah it was quite simple really, just swapping out the rear light and then running the cable to the front. It's a good example on why you do things like that in the early stages of the build lol

@alexandermichael117 2 года назад

Never new,you can have a camara as part of the reverse light,must buy one,for my campervan.

@LivingTheTinyLife 2 года назад

Yeah, it was quite straight forward. Just connect into the reverse light/sensors and that’s the power to the camera and monitor. It really was quite easy 👍

@gillmiller5193 2 года назад

Yet another success 👍

@alexrailton2067 Год назад

I installed a reverse camera a while back but haven't got around to wiring it to the reverse light, just flick it on when needed. I recently got annoyed with that reverse beeper and disconnected it, never thought of using the wires for the camera. I know what I'm doing today now!

@LivingTheTinyLife Год назад

Haha yeah just connect the power cable from the camera to the reverse beeper power cable and job done! The only downside is that it only has power when in reverse so you can’t just turn it on but I don’t think it’s really an issue.

@alexrailton2067 Год назад

@Living The Tiny Life Yep worked a treat. Just got it wired up and neatly tucked away, only took me half hour or so. I only need it sometimes when I'm reversing, can't see any need to turn it on otherwise so no issue for me 👍

@LivingTheTinyLife Год назад

😎

@ianjenkins771 2 года назад

Top job👍did you use the reverse beeper feed for both camera and monitor? My next job is to fit one of these

@LivingTheTinyLife 2 года назад

I did yeah I think it’s all connected to the same line as the sensors too. It was quite easy to be honest.

@tonyflanagan5682 Год назад

Hi, what do you think to the van covers? Are they worthwhile? Thanks for the vlog

@LivingTheTinyLife Год назад

The cover is great if you intend on storing it for a while, it did the job that was required of it, it fit the van really well and was useful to have the zips for the doors. It’s quite difficult to get on and off as you might imagine especially when you don’t have much patience :) The only reason we got it was because the van was parked directly under a tree so it would’ve got destroyed by bug poo without a cover, we don’t have the van under a tree anymore so we got rid of the cover as it’s massive and takes up a lot of room.