I went to use my Drok USB power monitor and found it was not working because it had a damaged USB connector. In this video I disassemble, then repair the USB connector, and finally reassemble the USB monitor.
Just reapaired my flash drive watching your video. I noticed the wiggle and the disconnecting sound my computer was making when I plugged it in. Taking it apart was not as easy as yours it looks like a dog chewed on it now lol, but it works after I soldered it. Thanks for the clear instructions.
Very useful information. This has happened to me a lot! Tthanks for sharing! Still supporting from the James Cox Goldmine Playlist! Have a great Sunday!
Nice fix, thanks. Glad it worked in your case. For me, the USB receiver for a mouse dropped on the floor and bent up about 15 degrees. Upon examination there were no obvious open connections so I de-soldered the end plug to examine it better. All looked ok so I re-soldered all 4 pins plus the side anchor points. Tested with a continuity tester and there were no apparent shorts. When I plugged it in again, still didn't work but now it was smoking at one of the sides. Still don't know why it stopped working. Might try de-soldering and re-soldering again to get rid of the probably short. Any suggestions?
It is possible the the circuit board may have sustained internal damage when the connector bent. The traces and annular rings around vias can be extremely close together with very thin circuit boards can be damaged easily with just a small amount of force. Another possibility is one of the surface mount components could have been damaged from the board flexing when it was bent. It is a bummer that some things will get broke beyond easy repair. Thanks for stopping by.
What to do my pendrive can connect but the data can't get.. Like example the usb connect but the pc don't show the data storage so.. I can't get my data
Got an add on your video that is literally "The Key" from that one Simpsons episode, where Bart get's Ms. Krabapple fired and helped her open up a muffin shop.
That was great, I sure wish I knew all this stuff like you, You are a genius, I need to know about a USB flash drive, Cant you upload like a movie on it off the computer then if you want to plug it into your smart tv and watch that movie?
Thank you Allen! Not too hard to do these simple repairs, it is good to know how to solder. 90% of all problems with electronics can be fixed with a simple soldering job.
Loved the video but it is not syn correctly with the sound. The sound of the hammering come first then later we see the screwdriver hitting the thing. Still it was interesting, and thanks for doing this video because this has happened to me and now I can fix it. Thanks for your support and friendship. Gary
If there are still pads on the board that can be soldered to and the USB connector still has the legs that get soldered to the pads in place it should work fine.
I stayed monitized since I passed the threshold before the cutoff date. Thank you for watching! I know I pressed your red button before but it was showing as not when I visited your channel so I hit it again.
Yes, if you sub to too many people in a four hour period, they discount the subscription as spam. Unsure of the specific numerical value for "too many" yet. Well done to you on passing the threshold. You deserve it.