Fix Flickering Logitech Pedals not working, braking by itself (G25 G27 G29 G920 G923) 

It fixed my pedals too. Took me 15 minutes and my throttle telemetry looks brand new again. I know now that my pedals needed this three weeks ago.

04-10-2024 it freaking works 🥹 My throttle has been fluctuating for like 2 months and I’ve been tryna make due (not trying to spend anymore money). But last night the brake pedal started doing some real weird ish and I was like aight time to take it apart. Lo and behold my pedals were HELLA DIRTY on the inside. Perks of living with a stylist all types of thread and hair and dust. Cleaned it, did the alcohol thing with the silver pieces, put it back together and boom like new baby 🙏🏾🙏🏾🙏🏾🙏🏾 Thank you bro I know this video is old but I wish you and all reading the best. We’re all just tryna have a lil fun when we get home and you saved me $300 bucks. Gracias my friend ✊🏾💪🏾

I was a bit sceptical when watching the video. But then I tried out and it worked perfect. I will never say again: "Alcohol is no solution". Thank You very much.👍👍👍

I have a second hand G27 which had a decent amount of dust and animal hair in when I opened it to make quietening and brake mods. Cleared it all out but some must have got to the potentiometers because they were jittering or dragging afterwards. This video solved that problem for me. I prefer to route the cables into the little clip channels on the upper plastic casing though. That would be easier if you do the box trick (flip the unit upside down and sit it with the pedals inside a box and the plastic resting around the edge), then remove all screws and base plate so you have only the upper plastic and individual pedals sitting within it.

This works okay for a while but the problem will return. To achieve a long term result the potentiometers need to be removed, dismantled and cleaned with a circuit board cleaner and cotton bud. Then a light layer of dialectric grease (non electrically conductive grease) needs to be applied to the contact mating surfaces. This will greatly extend the life of the potentiometers and give trouble free operation for quite some time. I did this six months ago and have had no trouble since.

Hi, I watched this clip one night, I noticed that the accelerator pedal sometimes flickered and it was annoying to play. I looked at this tutorial as I didn't have a special solution and I came up with engine oil and it works perfectly!

Thank you, very nicely explained and easy to follow! The pedals feel like they are fresh out of the box - hopefully it stays like that for a long time :D

I had this issue with my brake pedal since I bought my G29. I sent it back a couple of times to fix it during warranty, but they sent it back saying it works perfectly fine. So I used the clutch pedal as brake for years. I followed your method and now it works as it should have been in the first place. Thank you very much!

Thank you very much ! I really hated this problem. I use my g920 every day to improve my Racing skills, so it's terrible to have something like this. Now I know how to fix it. Keep up this great work :)

Nice, easy to follow and i fixed it, having heavy flickering problems with clutch and throttle for about 3 months, maybe even more, thought it was done for, but now it's feel brand new. Ty mate.

Dude thank you so much! I did exactly what you did on my 5 years old logitech and pedals seem brand new. I’m so happy, I was afraid I had to waste a couple hundreds for a new wheel but you saved me!!

Only been experiencing this for around a year but i got fed up with it, did this and works like a dream again!

I haven't done it yet... but I'm gonna tomorrow because of all the comments saying it works like the pedals are new came fresh from the box,thank you so much

Thanks so much dude. My accelerator was flickering and making drifting impossible. I dabbed some metholated spirits on the motor with toilet paper while pumping the throttle and the accuracy came back within minutes. Great stuff!

How do i fix my pedals, because all of them don’t work at all

Thank you so much. Fixed my G25 pedal box in minutes... after spending an HOUR trying to get the rounded allen screws off the pedals :P Legend!

thank you very much it fixed my brakes braking by itself

My gas pedal used to flicker from time to until it won't get full throttle when my foot is all the way down so I watch your vedio and it worked way better than I thought it would and I just wanted to say thanks bro

brother, THANK YOU! my pedals where flickering a lot and now thanks to you they're like brand new

oh wow this worked! ive had this issue for years and thought my pedals were broken, this fixed it and they feel brand new thankyou!

thanks for the help, fixed my g29 pedals, the gas pedal was sending wrong values and now it's working perfectly fine!

Thank you man I just fixed the pedals now. There was a whole bunch or animal hair in the potentiometers, the gears and there was packing foam in the brake pedal! As soon as I cleaned then out, they were brand new. Thanks!

U r a saviour brother 🙏🏼🥲

Hey man I've had this issue come up in the past but I've always been able to fix it doing this exactly! But now it seems to only stop it for about 2 laps of drifting and then it comes right back. It's my day off and I'm just tryna drift man! Lol any help is appreciated :)

Having this issue after 5 years of use, my brakes dont do this very often but I might check on the pedals soon, thanks!

Thank you bro, I was over dramatic thinking I gotta buy way better equipment 😆

Worked for me and saved me a lot of trouble seeing as this was the first video that popped up on my search, So the first thing i tried. i honestly didn't even think those ground wires were even really needed

I bought a brand new g29 racing wheel and the clutch aint even giving signals of life, neither the stick, any help?

Love the video production, this worked for me. Also while I was in there I took out the rubber stopper for the brake pedal. Thanks!

This one is great i tried with alcohol first time and it was great, but there is second video of guy doing it with WD-40 and yeah second time i clean it with WD-40 and it passes 6 months and still working perfect so this method is great but cleaning potentiometers with wd-40 had better result for me. Cheers great video tho!

Can I clean it using WD40? Ok, I did it!! Thanks very much🎉

Hey guys, if this didnt work for you, then try taking off the pedals and deep clean it all. Then remove dust and shit, and then spray some WD40 in those small circles on the side of the pedal, into the small gap. That fixed it for me!

can you use normal alcohol?

yooo it works, I have been fighting with this problem a whole year. Thank you my hero

Just did it and my pedals are working again! Thank you very much for this video! Amigo, Valeu demais pelo vídeo! Os pedais voltaram a funcionar normalmente! 💪🏁

I LOVE YOU❤ I was going to sell it but you came in clutch🎉

This actually worked, brake pedal acted as half a clutch and clutch was not responding at all, squirted some alchohol slammed the pedals and shes new again!

I cant control my car in forza ,i have a Logitech g29 ...and even drifting i cant ..can You help me with some settings of tips? Thanks

I used a spray can of electrical contact cleaner. I sprayed it into the pots while pushing the pedal. Fixed it right away.

Can u use wd40 as rubbing oil ?

broooo thank you so much 1 try i did not clean and just vacum and then i came to this video and used antibac handgel and it got fixed

This is just a quick fix to make them good again they need a complete strip down clean and di electric grease applied before reassembly i think you might be able to use silicone grease as an alternative

Didn't work for me, followed the instructions. Cables look good Lubed it all Cleaned the dust Any ideas how to fix it?

I don’t have isopropyl alcohol what can I use instead ?

how do you stop pedals drive byeself an when i unplug it still does it

My problem is my clutch doesn’t seem to be working how do I fix

Thank you very much brother I try to follow you. From the beginning, the swing brake pedal graph After doing that, I'm still.👍❤️

Thank you for your help! I think this video helped me to solve the stucking gas pedal issue.

my cutch is allways on full trotlle, and only work when i chance to invert cluch in car games, i have the same pedals in the video cna someone help me??

My brakes flickered every now and then when I was on forza motorsport 6 just driving cars around. Is there any way that the brakes can continue to get damaged if not fixed?

Hey bro did this but didnt help as my brake is engauging when using accelarator

will this fix the accelerator only going to 90% when pressed down fully?

Thank you man your a life saver just fixed it for me !!!

Will try this my 2nd-hand G29 pedals. Hope it works.

My peddles are black where yours are red. Does that mean it might be different when I open it up? I don’t want to open it up and mess anything further. I have Logitech G920 for xbox x.

hey man thank you so much. What sort of products can i use to clean the potentiometer? Like alcohol or compressed air or something

I have an issue where I will be driving in a game and when pressing the accelerator the brake will apply. Often when I let go and apply the accelerator again it will still show brake lights. Checked mapping, all seems fine. It’s not until I touch the brake pedal again that this stops for like 5 minutes. Would you recommend this video for this issue?

nice , I just starting beating mine with a hammer and it stopped the problem . I will try this the next time

I have one spare which is having issue gonna give it a try

Is there anything else I can use instead of the alcohol ??

Hey man I accidentally broke the thing you pushed in on your gas pedal with the black wire any way to fix that?

Mano se que el video es de hace rato. pero no basta con aplicar alcohol ipopropilico al potenciometro. tienes que limpiar por dentro del pedal la parte del engranaje que se mueve cuando lo pisas. ahi se junta polvo pelusas pelos de mascotas etc. tambien los pasadores de los pedales. y los conos de los pedales. el video sirve de guia esta super bien explicado . tenia ese problema por exceso de pelusones y pelos de mascota pero al limpiar me di cuenta que por dentro del potenciometro hay mucha basura que de seguro tranca el pedal si no lo pisas fuerte. tengo el mismo volante sabes de upgrades o cambio de componentes internos que lo mejoren? y otra pregunta la zona muerta del centro hay forma de corregir para que por ultimo le llegue fuerza?

Greatest tutorial ever. Thank you so much

What should i do if the problem comes back after about a week?

I finally got this issue after 6 years of use on my g29. Went to go open it up, turns out someone previously put red threadlock on the pedal screws. Could only get two out before absolutely destroying the little hex key and the screw heads. Time for a wheel upgrade I suppose.

Magnificent, that's a lot dude. It worked like a charm, I wish I found this video earlier

Thank you! I was so confused why the car RPM would start jumping up and down then I saw my clutch was the culprit. Now it's good

i just got my g920 yesterday and im having a problem were it is roughly 40% accelerated always making it impossible to play and if i push down on the accelerator it wont accelerate anymore or any less i was wondering if this is still the same problem

ahhhh thank you this fixed it for me. its been bugging me for so long

this is helpful, i have a prototype racing chassis that has some rough wiring. thanks for the video!

Thanks. Will give it a try and come back for an update.

oh my god it actually worked. thank you so much

Thank you very much. I've been looking for this quite long. I got the DFGT instead of the G27 and I thought G27s don't have this issue. I'll try it when I got the time.

Could anyone help me out please ...my brakes became too sensitive..even if i press just a little bit it applies 100% pressure ..I tried every setting possible but it doesn't work ...there is no wire damage inside brakes everything is absolutely fine...But its pretty much useless now ..everytime I ended locking up my tyres.

1:07 these nuts on my pedals are rusty any tips on how i can take them off?

Worked like magic. Thanks dude!

Hi, can i use contact spray for contacts 4:22

This is like gas pedal ASMR

Thank you for making this video it helped so much!

How can I change all the cable, my little cat just bit the cable

Doin the Lord’s work. Thankyou! It works like new now.

My dog ate my cable 😢 are there replacements available that you of ?

thanks man finnaly a good tutorial, my pedals work great now thanks😊👍

Do you have a link to a video that could help me open the potentiometer as I bought my steering wheeel second hand and I’ve had this problem a lot and I think dust and debris have gotten into potentiometer

Thanks so much. Fixed in 5 mins. Great voice btw 😂

Going to check on friday, thanks! My accelerator is just always on even under braking causing me to longer my braking distance

Mate, after i cleaned my pedals with connection cleaner my steering wheel began to turn off after connecting the pedals. Any solution?

thanks bro i just unscruw back scruws and i clean all the dust from my pedals and bom all workinga.thanks agin

i don't think it's gonna help me, because the potentiometer is damn wiggly and i can't see how lock it in place.

Good video , thanks!

The fix work Thanks for the post I improved my lap times by 2 or more seconds per lap great post 5 star post

If i have my pedal floored it flickers to half throttle hope this works

Can you also make a video to fix shift paddles? The left shift paddle of my G27 doesnt work anymore :( This video will help me a ton to fix my pedals which have exactly this issue and it looks like its overloaded with dust, because you can see tons of dust between the pedals already with the case still on.. You explained it really well and with very good camera too. Thank you.

The problem has came back a week later twice now are my pedals done for or am I doing something wrong?

I give you a HUGE thanks ❤

Thank you for saving my pedals!

I used electrical contact cleaner and I have done it 3 times with no luck, I may see if they are loose or something like that

Thx bro its actually works

I think it should come with the tools to open it and they should use your video as a guide for their customers.

There working again I hope 🙏 they stay this way thx brother