Fix leaky shower head with a stuck handle 

I got it off!!Using the same technique you used. Thanks a lot!!!That stuck nut was driving me nuts!!Thanks for taking the time to make the video. It was very helpful.

That is very helpful. Thanks for sharing. Also, manufacturer, Delta, should improve the design based on such many painful experience /claims from the customers.

I had the same problem but in my case, water was dripping from the bathtub faucet. The handle screw was stripped as well. After watching your video I went straight to tug the handle until it broke off the same way as yours! You saved me the time and effort of drilling and $480 dollars that my local plumber estimated for replacing the cartridge and handle. Dude, Yo da best! Thanks so much for posting this video!

Big help! Managed to get it off and cap off the whole unit before it flooded my basement, now just to wait for the professionals in the morning. Thanks man!

Thanks for the video! My handle screw was stuck and after watching your video I just broke it off as you demonstrated. Since I was changing the cartridge anyway, breaking it wasn’t an issue - just bought a new handle and all was done. Thanks for sharing!

Well done! My hex bolt was corroded, drilling didn’t work and neither did cursing at it in a language I’ve never spoken. Followed your lead and snapped its neck! And it was very therapeutic. After a trip to Lowes and Home Depot, with about $55 spent, got a new cartridge and handle. All is good. Thanks!!!

Thank you!!!! Great video had the issue of not being able to take off handle but got it now..THANKS AGAIN

Hell yes I tried all kinds of ish and finally found your vid! I got he handle off and was able to replace the cartridge and leak gone! Thank you for sharing!!

Man I have this exact same setup and exact same situation! So happy I found this video. Worked like a charm

That’s exactly what I was thinking I needed to do. Thanks!

Thank you, Just bought a home and this just saved me major cash!!!

Nice video. Mine was stuck like this as well. I soaked mine in WD-40 overnight and it came off effortlessly in the morning.

Very Helpful! I had issues with the handle screw being corroded, so knowing I could break it off saved me a lot of time and effort. Thank you!

I want to thank you for this video! I just fixed my leaky Delt faucet and my wife is very happy. Now, I know it's late but I want her to make happy now! Lol

I have this screw driver kit that comes with multiple little different screw heads and I managed to take off the screw on my handle with a T10 screw head. It was the perfect fit, screw came off easily. Try using this type of screw. I have a STREBITO Precision Screwdriver kit, if anyone is interested in using the screw head that I used. It is a pretty good buy, it has come in handy dozens of times. The kit costs about 20 bucks, so hopefully that might save you from having to break the handle.

Worked like a charm. This was the only video and the only way that solved my problem after trying for several hours . Thanks for sharing . My advise to all DO NOT drill the handle , use this way to break it but be careful and patient while doing it eventually it will break . Thanks again

Thanks for the video!!! Helped me a lot.

Took me a full day, but I got it off. Clamped on the faucet remover tool (that's made for knob-type handles). The remover tool was to get a proper ledge for prying. Then using a prybar and pieces of wood for leverage, pried where the remover tool was holding behind the handle. Pried several times with force until I saw a big enough gap to remove the tool and pry directly under the handle.

Thank you so much for this video. You definitely saved me from calling a plumber. I didn't realize my handle was the issue. I thought it was the whole thing. I will have to do the same process as you with breaking the handle because it is completely disconnected from the body area.

Thank you so much for this video. Very informative and easy to understand. We are going to try this tonight. Just subbed and look forward to more videos

Thanks man. Who would thought that I’d be in the exact same situation with the exact same handle. You told me exactly what I needed to know, can I break it. Appreciate your help

Thank you for the tip! I got mine out just like you.

Thank you for the video I appreciate it comforts me that I knew there was no other solution but break the handle not because I can’t figure it how things work but because the stupid manufacturers they design it that way for consumers keep spending in a piece of work.

The manufacturer really intended to make it hard removing the handle. They knew that the only way to remove it is to destroy it so will have to buy a new one.

Thank you. Have this exact problem. Pulled out the Sawzall and was about to do some real damage but your vid saved me.

Four years ago I’m here, doing the same exact thing with mine too. Seems like the only way to take it off is broken it. Thank you.

I followed your method and I was able to remove the handle. The tube supporting the round plate was stuck due to thread problem. I used an angle grinder to cut it off. Thanks

Thanks for the great video! Helped make my sunday project successful!

Good job man. Thanks my buddy!!!

Took me years to finally get it open but i was successful because of this video 🤣 ! Thanks.

Hi all. My handle was stuck and what's wild is there did not appear to be an allen bolt down in there. I had to do the "break" method which took 60 minutes of back and forth wiggling. Then the bonnet nut was stuck. Channel locks did not work! I hit it with some PB blaster penetrant and let it sit for 30 minutes, came back to it and was able to finally turn it by holding the pipe with another wrench. The bonnet nut and pipe threads had calcium deposits in them, this is the reason it was stuck. I wire brushed the threads and nut with the penetrant and it went back together. I appreciate your demonstration, it was very helpful.

good video, I was able to get the handle off with WD40 in the hole for a half hour then some force, handle got shredded regardless from build up and crap so I had to replace that --- the nut was also not moving, I put a notch in it with a hacksaw and used a flathead screw driver and a hammer to start it. Make sure to brace it when you are doing this though so you dont put to much force on your copper pipes and bust them inside the wall.

Great video..job complete!!

Genius. I love men and how smart they are when it comes to handy work or --> hard labor.. etc. God created man so amazingly & I personally am very grateful. Certain things come so natural to men and what a gift that is in itself. Like fixing things so the family is good and functioning normally. Thank you I appreciate this video with detail. I have been looking for a video basically doing step by step what you just did. My shower handle doesn't show a brand so I'm not sure about that, but at least i feel confident I can tackle this issue. God bless you and your family brother & keep up all that you are doing.

Thank You very much, been dealing with this issue for the past week, just saw this and cant wait to try the drill on it.

Thank You So Much Just Got My Handle Off Had Same Problem Had Drill It Out

What a pain in the butt that turned out to be for a little rubber washer. Excellent video, mine was stubborn

You guys are aware that white vinegar will break up the calcium holding that screw in. Turn the water off, turn the handle up, pour some in the hole, wait about 5-10 minutes and it’ll break free! I bought a $2 thing of vinegar instead of a $65 new faucet.

I had a Moen that was leaking. I soaked the hex nut in CLR and it came off. I also called Moen and they sent me a new cartridge free of charge. For the most part these fixtures have a lifetime warranty.

Before stripping the nut make sure you have the right size alan wrench. Mine was corroded and impossible to turn. I let some vinegar soak in the hole for a couple hours and poured boiling water on it to get some expansion and it loosened right up and I was able to unscrew the nut with an alan wrench. Good luck!

Thank you so much it was very helpful

Well done!! I've been looking for some advice about getting the handle off

The geniuses at Delta did not realize that by putting a screw inside a hole right under the shower, through daily use the hole would turn into a goo deposit. Once you change a new cartridge, put a tape so water won't go into the hole and no rust will bother you even again.

Sometimes if you’re incredibly lucky you might try a metric hex bit. If you’re Irish you might even have Fedex deliver it with a unicorn. My first thought actually was kroil and ez out. But ultimately you got it. Bill

I agree. I spent an hour drilling it out with no luck. I used a 1/4 bit and drilled right through it, still couldn't get it off... I'll have to break it off... those things are made with harder stuff than bank vaults.

Great video Good Job.

Mine was not as dramatic. The allen screw was not corroded in place but the handle was. I improvised with the standard knob remover, a prybar, a piece of 2x4 and a rubber mallot. Then I soaked everything in vinegar and coated them all with silicon lube before reassembling. Two months later, Delta sent me the replacement cartridge (free). I feel like writing to them asking them to make a handle removal tool.

Exact same thing happened to me today. I'm $80 deep and still got a leaky shower head!!! I'm so mad!!! I couldn't find just a handle so I had to purchase a handle, sleeve, and cover piece. Then I had to purchase a new cartridge.

I’m a master plumber,I would have done this same thing bad design by delta. Good job

Thank you so much your video really help it

oh man! thanks your video. Im doing cadtridge replacement and can not take off the the hex screw because the hex bolb is strip. so I decide to drill the same you and it works. thanks bro

Hey there, where did you get the cartridge and faucet from?

For loosening the handle, I used the SAE hex key 3/32". The SAE hex key set with various sizes seem to be a good buy that can come handy for other household items too.

I found that spraying wd40 into the screw hole and using a tiny screwdriver (similar to those that fix reading glasses) you can scrape out the hard water deposits from the Allen key hole and the allen key will set in as intended. Then you can slowly turn the screw out avoiding having to break the handle.

Omg same thing happened to me thanks for the video

Vinegar is the key to removing the handle. Spray and layer soak fir about 5 min

FOR THOSE WONDERING LIKE I WAS!! YES go ahead and just buy a brand new shower head set with handle!! It has the cartridge included!!! It’s cheaper than buying the cartridge and shower handle separate, plus you get a shower head and the roughing for behind the wall if needed. Which you shouldn’t if only needing to change the cartridge out. Im going to use the shower head in my other bathroom! The $79 one at Home Depot didn’t have the same valve but the $89 one does!! Hope this helps someone 🫡

Good job thanks

My handle was stuck but after watching the video I decided to use pliers over the skirt to loosen the nut. I pulled the assembly out then got the handle off. My set screw came out but the handle was frozen in place originally.

So no seats and springs. The blind leading the blind. Well done.

Thank you.

Dude. Lifesaver. I decided to break off my handle too. I was able to actually get the screw OUT but for some stupid reason the handle was STILL stuck. After breaking off the handle it was as easy as just finding the right part and putting it all back together. Life saver dude. 🎉 You just savedme from having to call a plumber, that's another 300$ I just saved.

I tried to replace the cartridge on mine. The brass ring holding the cartridge did not come off. I tried to use a pipe wrench on it and broke off the valve. Needless to say, an $8 job turned into an $800 job because I had to call a plumber to break open the wall and replace the entire faucet Moral of the story is to make sure you brace the valve with another wrench. I had no idea that the valve was only held onto the main fitting with three small copper tubes that break easily.

I’ve tried everything. Nothing bites on the stripped hex screw. Heat, WD40, CLR, LimeAway, vinegar, FIRE (literally). Nothing will get the damn thing to loosen. And I don’t want to drill it out or rip off the handle. Ugh 😑 He’s correct - $5 job into a $70 job (probably $100 with this 2022 biden economy). But I suppose it’s better than calling a plumber and being charged $300-$400.

Is there any way to get that cartridge screw out of the handle to save money on not getting a new handle.

Had the moen faucet handle which is supposed to take a 7/64 allen key. No luck. Tried using a T10 torx bit worked like a champ - makes me wonder if these grub screws are actually torx grubs and they just told the north americans to use allen keys because torx used to be uncommon.

Such a simple yet over complicated thing

Thank you so much for this video!!

My set screw came out fine, but the handle would not come off no matter the force. It must be corroded something fierce in there. Sprayed tons of lubricant and going to try tomorrow. I probably almost snapped the cartridge, which would be fine since I already have the new one, but feel like I might damage the piping if I keep going. Any other ideas? Just a slow drip I’m trying to resolve so I don’t want to be drastic.

Thanks lots. Can you provide the parts # for the cartridge and where to buy? I have the same issue as you have.

What was the part number on the cartridge. Looks like you changed the first one you tried to put in.

I found the allen screw on the handle was severely corroded into the handle. I used a rust buster type of liquid, a spray or two every morning and night, for three days. This loosened the corrosion so the allen screw could be removed. You should see pieces of corrosion flush out as you spray into the openning. Also, make sure the ends of your allen wrench (key) is in perfect condition. If it is already rounded off, you will strip the allen screw. I took my slightly used allen key and cut of the end up to where the key was in perfect condition, using a grinder cutting wheel, and that left the key end edges square and sharp. OR, go buy a new key. You will thank yourself later! Tap the key ALL THE WAY into the screw, using a small hammer, and twisted slowly left and right to begin loosening the screw. Keep the key firmly seated STRAIGHT into the screw during this process. After backing out the screw enough to remove the handle, I took it down to the work bench and put the handle in a vise to finish removing the screw with the allen key. Once screw was out, I cleaned threads and screw with vinegar to remove corrosion. Rinsed off the parts thoroughly, and applied an anti-seize compound (can use plumbers grease too) to the screw, threads and opening where the valve stem inserts into the handle. This will prevent future corrosion for a very long time. Good luck!

ave a handle with a screw hole in the middle on the front of the handle, not the top or bottom, that I cant get it off. I can't find any tool to go in the hole and latch onto anything. How would you suggest I get it off?

Couldnt you save the handle by breaking the plastic inside? How much for the handle by itself and the cartridge?

I had a leaky valve of the exact same type. I called Delta and under lifetime warranty they mailed me a new cartridge for free.

Put silicone grease on all the O rings and threads before installing the new cartridge!

Did you figure it out.... I have the same problem with the kitchen faucet

I’m having a similar problem. Allen set screw is full of gunk, can’t get a grip on it to turn it.

My hex screw was 7/64, came out easily, on a 15 year old fitting

Can I replace this kind of handle with the round door knob kind instead and if so how easy will it b to switch?

Well named video! I love the solution... Remember these things will break bc they were engineered to break!

You showed me exactly what i needed to do to get the frozen shower handle free and fix the drip. Thanks!!

I have Delta shower faucet Monitor 13/14 series multichoice model and I don't have allen setscreews in the handle and I don't see any can on the handle also to open and look for allen set screws. The handle is one single piece without any setscrews. Any idea on how to remove this handle.

Instead of spending $65 to $70, buy the entire replacement parts from Danco. Comes with 2 handles, one like yours & one round one, your choice. And new face plate, screws, cartridge, basically everything you need. Comes in chrome or satin finish. $39.99. Then keep the original for any replacement parts one may need like seals and springs.

Add a little silicone grease to all rubber parts before reassembly

What size Allen key is that. I can’t seem to get the handle off 😞

USE 1/16" DRILL BIT and drill in and then reverse it, will spin out the screw.

I wanna thank you so much for saving me at least $300

"$5 job turned into a $70 job real quick" All too true.

Thanks, mine was stuck as well and it was good to see what/how to break

What temperature should I set for the water? Thanks

Could you tell me the part number of the cartridge?

Did you have to buy a new handle?

I tried to hard to turn the allen key and I think I stripped it. Doesn't look like any hope with wd40 or vinegar at this point. I spent 2 hours. I think this is a delta h79 handle for $30 if I'm correct. At this point I rather just buy a handle and I already have the cartridge to replace. My question is, can I damage the pipe while breaking off the handle?? I don't want a $30 repair to be a $800 repair.

I am having the same issue with my shower. When you drilled, what direction did you go? Did you drill "lefty loosy" or "righty tighty" ? Or did it matter?

Mine is still stuck on. Will pray and hope for the best.

A better way is to hammer a T15 Star Screwhead into the bolt head, and it will screw out with a bit driver/screw driver. Takes 2 minutes.

7/64 inch hex/allen for my Moen single shower handle

Can you give me the oem number for the handle and valve thanks

My cartridge was terribly calcified from infrequent use and hard water and stuck badly. I had to buy a specific cartridge puller which eventually worked but I had to drip a vinegar solution into/onto the cartridge for two days.