Fixing 5 things that ALWAYS BREAK on EVERY GMT800 99-07 Chevy or GMC Truck

Подписаться 158 тыс.

Просмотров 101 тыс.

50% 1

So, you've bought yourself a new to you GMT800 Chevy or GMC truck, and you need to fix up some of the issues on the interior? Well, today we cover five of the most common interior fixes I have to do on EVERY GMT800 truck I've ever owner. This ranges from the power seat tracks being loose, water leaks, problems with the radio, and a whole lot more. I wanted to get these things taken care of before I go on to modify the truck so we have a good blank canvas to work from, and now that my Stepside Silverado is all up to snuff, we can begin the upgrade and modification process, which will start with the Suspension, and of course, some horsepower upgrades.
Parts Used in Today's Video:
GM Genuine Antenna Base, only $16
amzn.to/3sESeOQ
13" Radio Antenna with Adapter, $25 (fits OK, good reception)
amzn.to/3gnMogd
7 Knobs for Stock Radio (volume, tune, bass, trebel) $24
amzn.to/383NU2l
GM Genuine Ambient Light Sensor, $18
amzn.to/3gk4vmT
Seat Adjuster Repair Kit, $15
amzn.to/3ze1Jao
Not shown, but I also upgraded the speakers since the stock ones were blown...
6.5" JBL Speakers for front door, only $34 and sound pretty good
amzn.to/2UByKy8
4x6 speakers for B Pillars, havent installed yet, but only $35
amzn.to/383ODR7
#silverado #stepside #muscletruck
Visit www.tolmanperformance.com/col... and grab a shirt or hat today!
Don't forget to like and subscribe to the channel, and for more behind the scenes content and pictures of projects, you can Follow us on FaceBook
/ lttolman
For business inquiries, email tolmanperformance@gmail.com
Chapters:
0:00 The Task for Today
1:59 Fixing Water Leaks
5:57 Power Seat Problems
15:26 Radio Knobs and Antenna
21:59 Ambient Light Sensor

Авто/Мото

Опубликовано:

31 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 278

@aldrinalmario1513 2 года назад

Addressing these small things are what makes driving your vehicle more satisfying. Great video LT!

@brainshady 2 года назад

“The Cydeclone” would be awesome! All wheel drive, Turbo-ed autocross machine an homage to the old GMC Cyclone.

@michaelcoffin4364 2 года назад

That's what I had planned for my 2000 rcsb when I bought it. Already have the awd system. Just need to install and add the boost.

@victorbeltran9344 11 месяцев назад

Nice fixes. My top five when owning two 2006 Silverados were 1. Steering shaft bearing (fixes clunking under steering wheel) 2. Knock sensors 3. Service air bag front impact sensors 4. Lifters ticking ( used Lucas oil stabilizer worked for me) 5. Shocks

@benparry5318 2 года назад

Best mod I ever did on my 01 Silverado (aside from tighting the torsion arms to tighten up the front end) was to swap in PIAA bulbs in the high and low beams. Made a world of difference especially where I live well out in the deer-infested country.

@Winterstick549 2 года назад

What are PIAA bulbs? And where does one find them? The lights on my 99 could be brighter.

@xalos700r 2 года назад

----ultimate budget brake upgrade----2019, 4 piston calipers and hydroboost.

@LawrenceTolman 2 года назад

That would be awesome

@joevk6274 Год назад

My dad had the heater core replaced in his 04, and they forgot that little light sensor when putting it back together. So his lights were always on, day or night. I decided one day to fiddle with it and actually managed to fish it up into it's hole with a thin piece of wire, a small pair of needle nose pliers, and a pocket screwdriver. I hooked it with the wire, pulled it up into the hole, then carefully held it in place with the pliers while I used the screwdriver to twist it into the locked-in position. It took multiple attempts, and I probably should've just went in through the radio opening, but I got it.

@sean.g4516 2 месяца назад

BLUE TOP STEERING GEARBOX, moog problem solver pitman arm or your choice of brand. best upgrade I've done this year!! Was well worth it! Nomore sloppy steering wheel. Everything tight after these 11 years I've had it lol

@Todd_S 2 года назад

Thanks for sharing! I'm looking forward to seeing all of the bolt-on upgrades.

@LawrenceTolman 2 года назад

You and me both!

@alvinnelson4439 2 года назад

Good video somethings we all need to know ,I have a 96 gmc dually and the small stuff is starting to go out thanks for doing these videos .

@Pressedsteelcustomsllc 2 года назад

I have both the GMT800 and 900, but I'm so glad these dont have the peanut brittle dash's that the 07.5 -13 Silverados have

@brandonbaker1514 2 года назад

The year gm filed bankruptcy

@dromendoza 2 года назад

My 2001 as a dash of pills. When I took off the dash cover to try to paint it, it cracked almost right away. Had to go down to pick and pull and pull out three different ones to save it

@albertpintor3522 2 года назад

If you have a beige dashboard than the paint chips exposing black plastic

@AlanRoehrich9651 Год назад

My 03 dash cracked in three places when I pulled it to get to that passenger blend door actuator on top on the passenger side. I used a fiberglass kit and epoxy to put it together, but the texture finish is beyond repair. SEMS has the correct paint.

@MrShenron89 2 года назад

Hey again LT, great video! Very professional as always. I will suggest taking a look at your speakers if they are original. I own a 2001 Sierra ext. cab and my speakers were all shot even though they were emitting sound haha. I ended up rewiring the whole thing with a friend and adding two 10in subs in a box that fits under my back seat. I swapped out the radio with a pioneer, very happy upgrades.

@jameshall4385 2 года назад

Nice video. The little things like that don’t seem that important but they make the overall driving experience so much better. That 4.8 ltr needs some power upgrades and is a perfect candidate for boost.

@sinistersilverado965 2 года назад

I love the plan's you have for the truck

@alainrodriguez7883 2 года назад

Great Channel and great content. I have been waiting for you to do this exact video since you me tinned it last time.. I have a 02 silverado and u nailed everything wrong with my truck too. Lol..thanx, and keep them comin.. really interested in the ugly truck and this truck vids

@sogood4u489 2 года назад

Your the man LT for some people this might not hold there attention but your channel has helped me a handful off times, I grew up loosing my dad at an early age and the power block/power nation and I learned so much.

@ceciljohnson3829 2 года назад

Awesome information , the seat adjustment spacers will be a project I’ll get done for my son soon.

@LawrenceTolman 2 года назад

It’s a super easy project also

@erscustoms911 2 года назад

Glad you listened to are comments to build it budget friendly, and lift it like a everyday driver ! Thanks for the update

@LawrenceTolman 2 года назад

You got it!

@coryridder1937 2 года назад

I learn new things every time I watch these videos. I wish you had a couple clones so you had time to make more videos each week. Lol. I keep checking all the time "just in case" you snuck an extra video that I missed. Lol. Keep it up dude

@LawrenceTolman 2 года назад

I wish I could do four a week, but it’s a ton of work to do the two by themselves lol

@craigsanislo7458 2 года назад

Awesome vid man! Not super sure why I like this channel, I’ve never had a pickup and generally am more into euro sports cars, but I’m enjoying your stuff. Keep up the great content!

@legodude19999 2 года назад

I think it’s his presenting style, sure keeps me hooked!!

@LawrenceTolman 2 года назад

thanks a ton! much appreciated

@dumb280zpat 2 года назад

Speaking of…. Let’s see more E39 BMW content LT!

@chopperguy6661 2 года назад

@@LawrenceTolman pull your fender liner before removing fender you may be able t access that grommet

@sinistersilverado965 2 года назад

Never had a truck? What's wrong with you?

@spencer15898 2 года назад

hell yes keep up the good content!! love these trucks!

@charlesschluessler546 2 года назад

This channel is way better than those on cable. Thanks for the info.

@LawrenceTolman 2 года назад

Glad you enjoy it!

@kennydemartini2169 2 года назад

I have a '99 Silverado 4x4 that gets beaten on a daily basis. It now has 227,000 hard miles on it. The only problems I have had are the typical rusty rockers and cab corners, and of course the brake lines from living in the rust belt. I've replaced both window regulators at least twice. The door hinge bushings go bad every 3 years. The sun gear shell broke in the transmission (very common), then a month later the low reverse planetary exploded (probably my fault). I put a posi unit in it years ago, and haven't touched the rearend since, but I have replaced several bearing sets in other trucks. The transfer case has never been touched, nor the front differential. I replace the rear u-joint about once a year, and I have replaced both front hubs twice. I can't keep brakes on the truck, it likes to eat the rotors. One of the heater hose couplers broke while going down the road, that was fun. I bypassed the heater core and drove on. I've put 2 water pumps on it, and changed the sparkplugs 10 years ago, and replaced one fuel pressure regulator. Other than that, the engine has never been apart. I love my truck!

@Winterstick549 2 года назад

My 99 Silverado, 4x4 has only needed two front hubs and some ticky tack crap such as the fuse which goes to the digital odometer

@nothinstock83 2 года назад

I enjoy all the content you put out for us to learn from. I have a 1999 chevy silverado single cab 2 wheel drive. I did the 4 hi mod and drl delete and the escalade antenna mod. Absolutely enjoy those mods. Keep the good content coming.

@mattcat231 2 года назад

the 4-high mod is one of the best things on these trucks! i put LED headlights in and i can see people's souls, lol!!! My DRL delete was done by the truck itself by burning up the bulb sockets, lol!!!

@nothinstock83 2 года назад

@@mattcat231 wire the day time running lights to the blinkers and you might like the full front of the truck lit up. I'm about to put switch back lights in my blinkers so the front of my truck will be all white light until I turn the blinkers on

@mattcat231 2 года назад

@@nothinstock83 i actually thought about doing double park/turn signals in there with another 3157 style socket, but what stopped me was if the wiring would hold up to the extra draw

@nothinstock83 2 года назад

@@mattcat231 I've had mine set up like that for 3 years now even put the led flasher relay and no sign of any issues like sockets burning or overheated wires

@UncleSarkis 2 года назад

I want to fix my wife's Yukon XL's seat, it's doing the same thing yours was, but that looks like more of a PIA than I was expecting. I might wait a bit on it.

@bobparker3215 2 года назад

That's awesome that the seat adjustment is such an easy fix. I will be doing this on my '03 Silverado SS for sure. Just fixed the 3rd brake light leak. Still have to fix the burned out gauge lights and PRND indicator and that should take care of all the annoying little things

@richardharvey8939 2 года назад

Get iss cluster got mine in blue led love it and no core charge hassles. If you send your cluster back within 30 days you get lifetime warranty and if you don’t you get 1 or 2 year warranty if I remember right. Even if your cluster is not repairable no core hassle. Mine had od off indicator not working and they sent me a new one cause I mentioned it when they called to see if I liked my new one. I told them I wanted to wait to see if I liked it before replacing and 24 hrs later a new one was at my door. Great customer service. I have the 8.1 allison combo and I think I got cluster done for 6.0 truck first from them because that light wouldn’t come on at start up. But I love mine. They do a lot of electrical stuff been in biz since the 40s.

@anthonyrodriguez-fo4lz 2 года назад

Thanks , now I know where to get new radio knobs.

@Walker_Porter 11 месяцев назад

Thanks for the tips. The water leak in My truck caused the paint to bubble up on the floor pans I scraped all the paint off and repainted it with some "rust stop spray" paint. Not sure it'll work but it's some kind of preventative maintenance I guess.

@stupidlucky9220 2 года назад

Great way to dry out interiors on cars is to let the car idle in the sun with the heat cranked for a half an hour or whatever is needed drys stuff up really quickly!

@toddmoore8808 2 года назад

Run the a/c. It dehumidifies the air inside the truck. Dries it faster.

@erikcapozzi3425 6 месяцев назад

@toddmoore8808 hopefully you replaces the cabin air filter after

@chriswise1232 2 года назад

1) Brake lines rusting through 2) rockers and cab corners rusting 3) tailgate handle 4) blower motor resistors 5) AC leaks

@cargotoolshop5319 2 года назад

Just bought a 2001 1500HD beautiful truck but rusty rockers, and frame is ugly, sounds like a big job but if it was a Duramax and needed work you would pull the cab, so I'm going to pull the cab and box and sand blast and paint frame, do brake lines, fuel lines, rebuild the front suspension and brakes, rebuild the front end and reassemble, the rockers are soft on my truck, going to use panel bond and replace them, no welding as it burns the paint off the back side of things, stay strong

@mattcat231 2 года назад

@@cargotoolshop5319 wanna do my 02 while you are at it? lol!!!

@mattcat231 2 года назад

also rear body mounts!!!

@AcmeRacing 2 года назад

For #3, lubricate the pivot point where the latch cables meet behind the handle. It fixes the problem where the tailgate won't stay latched.

@mattcat231 2 года назад

@@AcmeRacing i have used every lube under the sun on my handles in my 3 gmt800's, and nothing works, i just replace them and have another year or 2 of working tailgates, lol

@bruceshepard1136 2 года назад

I had same problem with something wet on the driver side in the back seat floor board of my crew cab ended up being brake fluid from my hydro booster was leaking inside and running all the way back .love the videos

@LawrenceTolman 2 года назад

I'll have to check that out, thats a crazy kind of leak I've never heard of

@dillanhamilton 2 года назад

Thanks for the link on radio knobs LT. All mine are cracked on my 96 k3500

@LawrenceTolman 2 года назад

No problem 👍

@chrismarland6031 3 месяца назад

Great video on the water leak....thanks! What year is yours? I have never seen a center console like that one that does not go all the way to the dash like that.

@josevazquez8201 2 года назад

A very nice exhaust system,intake, fuel upgrade budget build !

@LawrenceTolman 2 года назад

That's the plan!

@justinjensen9558 2 года назад

Love the video, and love the direction your going. Hopefully I can follow along with my 05 single cab

@AP9311 2 года назад

LT, great video! But if you pull the fender cover under the wheel arches. you can reach the ant wires. I did do them while back. Had a lot more access to plug the seal back in. Hope that helps!

@LawrenceTolman 2 года назад

Good tip!

@buckwild6587 Год назад

Id love to see a video like this on the next gen! Nobody talks trucks like LT

@EngineeringGoneWrong 2 года назад

Ideas for pushing grommet without removing fender. -Spray with wd-40 and push -Open door and see if you can reach it from that side? Maybe... - long pick, tongs, needle nose? -Pull from inside? Idk, just thinking here. Great video as always!!!

@TBGaels32 2 года назад

I wonder if some of the issues of the GMT-800 from 99-07 GM products also apply to the GMT-400 trucks from 88-98. I know my 98 has some interior issues like the motor for the window regulator and door handles.

@jeffsparks5930 2 года назад

Great "how to" video - best of luck to ya 👍

@lionelpatterson1436 2 года назад

Fantastic information you're the best

@LawrenceTolman 2 года назад

I appreciate that!

@joshbrake84 2 года назад

What I’d like to see is your take on the first gen s10 LS swap. If I had the truck and a LS. I’d let you do the voodoo you do so well!!!!!

@kenman1717 2 года назад

I have a 2002 chevy 1500, gladly i'm only dealing with the ambient light sensor, as well as some exterior stuff. but its been driving me nuts that the headlights stay on all the time. I put LEDs in when i bought the truck in jan 2019, lights started stating on, in about feb of 2020. since then drls have only come on about 10 times, couldn't really find a solution or a cause really. The trick of pushing the dome light button to override doesn't work on mine, i think since its the Canadian version. I figured to pull the top of the dash, check power/ground and was going to replace the sensor anyway since i was there, this really helps. I have big hands so no going behind the radio, i have a JVC in there and its a tight fit, had to tap the holder in it was so tight, and i'm sure its not even clipped into the dash, just stays cause its so tight.

@richardgreenlaw1442 2 месяца назад

I had my 99 2500HD 4X4 23 or 24 years, and the auto head light sensor never failed. Still worked when I junked the truck.

@markmaherr 8 месяцев назад

Side note, what vise is that?? I need one of those! Im in a little vice part of life, ive got 3 in different sizes, but all normal rotating mount type... i would like one held down solid to my metal table as well

@Hot80s Год назад

Wet noodle column shifter combined with a stiff shifter cable, gauge cluster stepper failure and hazard light switch issues that effect other things like brake lights. Fan blower craps out on number 3 position.

@fartzr.schmelli3351 2 года назад

Dude! Sweet video. My 2000 GMC single cab stepside has the same problem with water in the rear corners. I'm in Colorado so not a huge problem as it's mostly dry here, but it's been bugging me forever!

@The1s2a3r 2 года назад

I use 303 tire protector on those rubber plugs, like the antennae plug seal. pops in and seals perfect . just another method to the madness. I own a 2004 xtndc 1 ton 8.1 silverado lt. Here in rainy BC Canada

@user-th8kc8pn3l 8 месяцев назад

For pulling your antenna grommet thru, try coating the tapered cone end with Dawn dish soap.

@peterpeterson7784 2 года назад

I'm surprised that the you did not address the steering shaft and the bearing on the interior side of the steering shaft that can go bad. Although I never had a problem with my 03 Silverado that was just shy of 200,000 miles when I traded it for a 07 Silverado. We have had problems with a 05 Suburban at work.

@LawrenceTolman 2 года назад

I may get to that sooner or later

@tommoon2700 2 года назад

Hell yes LT 🤙

@dgselb96988 7 месяцев назад

Need help. I have a 02 4.3 I have replaced the heater core I had to do it in my spare time now I have put it back together (after about 8 months) now my instrument cluster don’t work. Any suggestions?

@Alejandra-cv7rj 3 месяца назад

I had the truck for years never figured out why the lights stayed on when i started the engine. I gotta replace the radio as well so ill be doing the ambient sensor as well. I thought that was the red light for the alarm.

@RustyZipper 2 года назад

I had an ‘03, replaced the brakes every 2 years, the drivers window motor (cable) twice and pass side once. ABS sensors / Wheel bearings every few years (always when I had no money) and the brake pedal always had too much travel since new. Other than that she was a good truck. I love my ‘12 much more except the Alternator went and A/C stopped blowing cold… at 50k miles…. Meanwhile my g/f’s ‘08 Rav 4 needs a new Alternator… at 280k miles, and the A/C still blows as cold as new!

@markkunklejr2387 2 года назад

Thank you I now know why my headlights stay on on my suburbans and tahoe but my problem on my 2 suburbans is I have no turn signals or hazards the switch doesn't work

@clandestinerobot14 2 года назад

Its pretty easy....??? And then you see your hand all red and scratched up. Keep up the great work@!

@LawrenceTolman 2 года назад

Easy in theory, in real life it was a pain in the ass

@redman715 2 года назад

Yep!

@mikealexander4166 2 года назад

That light sensor is no fun to change out. Did 1 in my 2002 Tahoe. Small Hans and long arms would be a big help. Like your post cut up hands. Like I said a very similar experience.

@teddyjohnson5155 2 года назад

I want to see an all motor big hp ls build that's done for the average guy... No turbo, no blower... Maybe a littttllleee spray (n20) for fun. But mostly going for all motor. Maybe a th400. Caltracs. Maybe some road racing flare mixed into the suspension

@ericvortecmax 2 года назад

You can get a double din kit and put a touch screen radio in it like in the 2003 and newer trucks

@JimmyMakingitwork 2 года назад

3rd brake lights leak water. Blower resistor and connector. Window switches, sometimes. Idler arm if over 1/8-1/4” play. Console door pad. Head lights fade pretty bad. Paint peels and bleaches if kept outdoors. Oh, and nice truck, always little issues, cheap and easy fixes though.

@LawrenceTolman 2 года назад

I've got the paint issues on both of my 2000 trucks

@redtop03 Месяц назад

What does the 2500hd torsion keys do for a 1500 truck ?

@teaguegearhart9851 2 года назад

Leaks. I hate leaks. This applies to just about any leak. Thanks LT. Great to have a new project that needs some TLC.

@Danman1972 2 года назад

Just went through this with my 08 GMC.... I pulled the interior out. Seats and all... front and back. Up at the fire wall I put wood to pull the plastic out and a blower fan had the foam dry in a hour (warm day). The wet padding soaked up to the firewall and made that foam like a sponge. The padding dried out (put it in the on the hot concrete driveway in the sun for a day). I cleaned out the inside of the truck and dried out. The doors open for a good 100 degree day. The issue was my 3rd brake light. Cracked and letting water in. New light and gasket. Also, the flaps on the back cab corners were gone and the rubber that was left was gummy. Replaced those and its dry. I sprayed out the carpet with a pressure washer and let it dry as well. Cleaned it inside and is smells great! If you have a truck that is 10 years old replace the vents, light, and foam.

@LawrenceTolman 2 года назад

its a pain to deal with those leaks, but well worth it to clean out the interior like you did

@Titoo.1 2 года назад

The only one of these mine has had is the ambient light sensor

@User8571 2 года назад

Good basic quality of drive (life?) improvements. Quick tip when dealing with those rubber grommets, use some undiluted dish soap concentrate (Dawn) to lubricate the end that your feeding through the metal or plastic cut out. Then twist back and forth while pushing and, eventually it will work its way through. Also, sometimes a smaller gauge stranded electrical (like 14 or 16 AWG) wire works better as a wire fish than string. Less prone to snagging or breaking.

@AcmeRacing 2 года назад

I put rubber parts in a bucket with hot water for a few minutes to soften them up. Give them a quick wipe and they're much easier to install while they're flexible.

@jonallen1985 2 года назад

Hey LT I have a 2018 Silverado 1500 4x4, I’m thinking about doing a dual position rear caliper conversion, I was wondering if you think using 2000 and up Tahoe/Avalanche/Suburban brakes (dual piston calipers and rotors) would it work?

@LawrenceTolman 2 года назад

Not sure on the newer stuff rears, but I do know the 2019+ Silverado 1500 brakes are awesome, 4 piston I think

@mark5251993 Год назад

Any suggestions on torsion bars my trucks tires are wearing funky from inside to outside on both sides to far in at the top out at the bottom

@mark5251993 Год назад

I seen the ford how dare you cheat on Chevrolet lol 😂

@chanteljoshplummer8745 2 года назад

Hi LT, love the content bro. Another question for you, 97 chevy 2500 with 5.7, engine cranks but is getting no fuel. Used your fuel pump video to replace that thinking it was the issue. Replaced fuel relay, ignition switch, fuel filter, fuel pump. Now it won't start at all. Thoughts?

@LawrenceTolman 2 года назад

You’ve verified lack of fuel pressure with a gauge? Looks like you’ve covered the bases, I’d also check with a volt meter to see if you’re getting power to the pump

@chanteljoshplummer8745 2 года назад

@@LawrenceTolman We have not verified the pressure but will and will check out the voltage. Thanks man, I will let you know how it goes

@Nodgeface 2 года назад

Surprised the clunky steering shaft didn’t make the top 5. Drove me nuts on mine.

@zxJC34xz 2 года назад

How do you fix that

@retributionaura 2 года назад

@@zxJC34xz ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-eDVEm4JPp1s.html could be this bearing, was on mine

@superc4308 2 года назад

I had to put a cover lay dashboard skin on my 2000 sliverado looks brand new

@BRED23 Месяц назад

My 99 4.8 Silverado has a rough cold start and revs high on start any idea?

@bobbyevans7975 2 года назад

LT do or tell people how to do an LS swap like mainly from a 99 Suburban and drop in a 2002 LS

@BudderTak0 2 года назад

dont forget about the fuel gauge dying

@mth303 2 года назад

Hey LT, what company did you use to manufacture the custom transfer case input shaft, on the awd GMT400 on Powernation? I've been searching everywhere online and I'm coming up dry.

@LawrenceTolman 2 года назад

made by Tim at Modern Muscle Salvage in Michigan

@krellerj1111 2 года назад

Hey Lawrence, I have a 2004 GMC Sierra HD 6.0. I was wondering what you would suggest for mods

@LawrenceTolman 2 года назад

tons of options there, my vote is always for a turbo lol

@bryanomicioli3301 2 года назад

As i have had 4 of them. Number 6 is window regulators

@LSandL31 2 года назад

Kind of a crazy idea for the antenna cable grommet, using a fuel line disconnect tool to apply pressure on it to set the grommet?

@LawrenceTolman 2 года назад

That is a good idea in fact. I’m gonna try it

@grants.9120 2 года назад

In the wonderful words of AVE, TAPPY TAP TAP

@wrking287 2 года назад

Great video!

@LawrenceTolman 2 года назад

Glad you enjoyed it

@kurtblackwell6214 2 года назад

Build suggestion: A Full-size Syclone. Add AWD tc, manual trans, lower it a bit, and of course add Turbo. How sweet would that be? :)

@LawrenceTolman 2 года назад

I love this idea

@bobbyromo69 2 года назад

Do you have a permanent fix for the tailgate handle problem? Cause both my 01 and my moms 02 and also my grandpas 04 have this problem 😅😅😅

@LawrenceTolman 2 года назад

One thing I’ve done before is remove the handle and take a torch and heat/kinda melt the center plastic bushing to let the little arms retract easier

@mark5251993 Год назад

What size are the seat bolts?

@Silkmaster4200 2 года назад

A small mod lol Maybe white cool LED bulbs 6000k Low beams and high beams. Also wondering can get whole clear headlamps or whatever it’s called ? Same fog lights update that maybe. I know it small still look good.

@ericpigg2689 9 месяцев назад

Another annoying issue is the daytime running lights burning out. A lot of people switch to LED, but I did not like that look for DRL. If you use bulb 4114, the sockets will not melt from overheating. Many people use 3057 bulbs for the DRL which run too hot and cause socket melting and poor bulb life.

@fmanion24 Год назад

My dash gauges flicker on my 99. Drives me crazy must be a bad ground somewhere.

@TxRedneck 2 года назад

Hey bubba, since there was water incursion, how do you treat any actual or potential oxidation in those cavities?

@LawrenceTolman 2 года назад

Most everything is covered in paint, so I wasn’t too worried about it as long as everything dries out.

@shadowopsairman1583 2 года назад

Replace the cab vents too, 3rd brake light seal

@darrenvogel8096 2 года назад

Have you had any problems with the pitman arm/ idler arms? I've been contemplating replacing myne by myself since the shops where I live want just shy of $1,000 to replace the pitman arm and idler arm.

@LawrenceTolman 2 года назад

they're OK for now, but I'll probably install new ones when I redo the front suspension.

@haydendenard2693 Год назад

Everytime I buy one of these trucks I always replace the 3rd brake light with an LED for the fright cargo light and the courtesy lights in the door panel it's less than 100 bucks and makes a huge difference every cab vent also always leaks on me too lol

@ricktaylor3748 2 года назад

Chevy trucks always have water leaking in the cab issues. I bought a new 2010 Silverado LT, it leaked like crazy. I toolkit back to the dealership 12 times, they said it wasn't leaking. I pulled Bach the carpet, and soaked up a beach towel full of water, then showed the repair shop foreman. All he said was" what do you want me to do"? I said~ Fix it. It's still under warranty. It leaked water until the day I sold it.

@chillbillywyteboy2095 2 года назад

Hey lt I've got a question for ya I've got a gmt800 that has no head lights won't come on manual or auto I've checked fuses the auto switch on dash relays and still nothing.. any suggestions??? My only other thought was bcm

@chriswise1232 2 года назад

Whip out the DMM and figure out where you don't have voltage.

@chillbillywyteboy2095 2 года назад

@@chriswise1232 Thats the next mission brother only other thing I can figure

@twiztid6977420 2 года назад

Miss my 05 daily

@danwake4431 2 года назад

i disabled the auto lights in mines. My assigned parking spot meant my lights were aimed right into the 1st floor neighbors bedroom. Every morning going to work as soon as I started the truck it would light up their bedroom. Rude. So I disabled it. Also disabled the DRLs because it makes it look crosseyed when it's coming toward you. Ugly.

@AcmeRacing 2 года назад

I had a 2002 Silverado WT 2WD with a five speed and 4.3 V6. I had the following failures: *Catalytic converters failed just before 60,000 miles and again at 150,000 miles *Intake manifold leak that let coolant into my oil at about 100K. *Front hubs replaced twice at around 70 and 140,000 miles. Front wheel bearings can't be serviced, and when they wear slightly the ABS triggers with no wheel slip on low speed stops. *All fuel and brake lines rusted. *Plastic filler neck wore out and caused a leak in the evap system. *Brake calipers replaced multiple times after the pistons seized in the bores. *Multiple plastic timing covers replaced to stop front main seal leaks; it never stayed fixed for long. *Noisy serpentine belt; switching from OEM to Goodyear Gatorback belts finally fixed it. *All radio lights and multiple dash lights blew out. The bulbs are soldered in and not easily replaceable. *The rear bumper rusted through. *The tailgate fell open because it wouldn't stay latched. Whenever I see one of these trucks with a ratchet strap or bungee on the tailgate I tell the owner how to fix it. Lubricating the pivot at the center of the latch cables fixes it. I finally got rid of it at 170,000 miles when the doors rusted out and the transmission started shifting hard. It wasn't worth it do do a clutch and transmission rebuild plus door shells.

@user-tw8ov 2 года назад

Do vids on best truck models

@rodrigohdz4318 Год назад

The only thing on the video that I have fix is the brake light and the antena delete I have the truck since 09 and besides2 tranys and random reduce power has ben trouble free and my dash just ended like tortilla tostada but was easy replacement

@chazgeisler6213 2 года назад

Let’s see the stepside with a remote mount turbo! It can be made reliable!

@LawrenceTolman 2 года назад

I do love boost...

@dromendoza 2 года назад

The two biggest pains in the ass I had to deal with on my truck, a 2001 sierra, was the blend door actuator on the driver side, and slow power windows. If you get any more free time on your hands, you should make a video on those two. I fumbled my way through replacing that actuator and finally found the right areas to lube the run channels.

@mcgo0097 2 года назад

@Pedro Mendoza we’re you able to fix the slow windows? Hate the speed they operate!

@dromendoza 2 года назад

@@mcgo0097 I did. I took the door panel off and used grease on the regulator cables. Worked it a few times and it’s still slow but much much faster than it used to be.

@replica4132 2 года назад

I just had to replace the cab vents on my 06 sierra, while I was in there I stripped down and repainted the floor, and replaced the jute with dynamat. :)