Yep! You hit the mail on the head. The AT Pro is not that hard to set up if you know what you are doing. You hit all the key points. I would recommend everyone follow your advice to a T. The key to ocean hunting is to manually ground balance after you first auto ground balance it and to tune it to less than what it reads into auto by about 3 points or thereabouts. The ATP should then run quiet or just minimum noise. It works best in flat calm swimming areas. Wear Grey Ghost earphones instead of the crappy blue ones Garrett sells. GL & HH!
Great info! Been working with AT Pro for a long time, great machine but never reset it yet.. Couple of tips for yall: Number 9 clean your coil protector, especially after a water or sea search. Number 10 switch off your mobile phone (double usefull cause your lady can't mess up your search session :)) Number 11 high voltage cables might disturb your signals.. Happy hunting..
Thanks so much. I brought my AT Pro with me to the UK and after detecting in saltwater (bad idea with this machine, obviously) it started giving me chatter. The chatter never went away. With your permission, I'd like to make a video explaining these steps on how to fix it to my subscribers, and of course i'd give you full credit as you deserve it. Please let me know, I want to go detecting tomorrow here in the UK before i head back to the states, thanks!
Thanks for this! Very helpful! One more to add might be the simplest explanation of all...replace your batteries. I've had weird chatter start up before only to realize that my battery bars were running low.
Thank you sir! I subscribed and thanks for the help! Your advice helped me diagnose my detector i had for only 3 days! Afterwards from your help I found 2 more pennies with the AT PRO
Great video. I have the at pro and still getting used to. My first detector was an ace 250 and I SWEAR I've found more stuff with. Obviously still learning the at pro
Great stuff. I get a lot of chatter on my at. I use some of those but forgot about the reset and the frequency change! Thanks. Heading out this weekend!
I want to thank you for your tips that are very helpful loose connector that's all it was your awesome something simple as that overlook still learning
If you have some cousins from Chadbourn, N.C. You and I might be cousins. There are a lot of Andrews running around both North and South Carolina I have never met! I live in South Florida and hunt the beaches every 2-3 days. Not a lot of treasure, but every now and then a ring will turn up.
I have had a couple of the stock coils go bad. I have an NEL right now and has lasted longer than the stock coil. Hitting rocks underwater does not help!
Great video thanks for the info I started having a problem with my AT PRO, yesterday every time I would set it down to dig a target it would shut off, has anyone had this problem ? and I also put new batteries in and it still cut off any help would be greatly appreciated, Thanks, ( I also subbed your channel )
@@bbushert It's on there pretty tight. You have to work it off a little bit at a time as you go around the perimeter. If there's sand grains between the coil and cover it'll be even tighter. So be patient.
Thanks. However, I turned my at max on with no coil even connected and it was making the same noises. Factory reset does nothing. I guess the control box is euchered