Flush setting 101. Follow the instructions and pray a little to whichever deity you subscribe to - it’s simple honestly 🤪
1. Drill a hole.
2. Use a ball bur (or several) to open the hole to ¾ the size of the stone. Use a bud bur to open the top of the hole to exactly the same size as the stone - if you make it bigger than the stone - you’ll need to find a larger stone 😉 DO NOT MAKE IT BIGGER THAN THE STONE!
Use a setting bur exactly the same size as your stone - drill deep enough with your setting bur so the table of the stone is flush with the metal. DO NOT USE A SETTING BUR THAT IS LARGER THAN YOUR STONE!
If you don’t have the perfect size setting bur - which is usually the case, you will want to use the closest size SMALLER bur and ream out the hole - KEEP THE BUR PERPENDICULAR TO THE METAL AND MOVE METHODICALLY, we are not mixing pancake batter.
3. Ensure the stone is a tight fit - if it’s not, select a stone that is slightly larger than 0.01mm can make a big difference here! The stone should not slot into the hole but should require a LITTLE shove with a brass pusher (basically a tapered piece of brass rod in a graver handle) to sit nice and securely in the setting.
4. Use your needle burnisher (broken ball burs in graver handles work well) - they should have a smooth rounded and polished end if you value the surface of your stones - and run it around the stone at an angle just off horizontal until the stone is set.
Good luck 😘
PS. IF YOU NEED GLASSES WEAR THEM - if you can’t see what you’re doing, you are most likely going to suck.
Here's a FREE E-BOOK to find out the tools you absolutely must have to get started, where to splurge and where to save.
➡️ 📖 Download here: lucywalkerjewe...
_______
Want to learn more about jewellery making, including stone setting, design and rendering, as well as building creativity? Check out the Metalsmith Academy! We'd love to welcome you into our worldwide community of jewellers.
➡️ 💍 Join here: lucywalkerjewe...
_______
FREE RESOURCES for stone setting & metalsmithing beginners:
How to spend your first $200 on tools
➡️ 💸 lucywalkerjewe...
Need practice? Download our mandala saw piercing template
➡️ 🌀: lucywalkerjewe...
_______
Let's stay connected:
🌐 Website: lucywalkerjewe...
📸 Instagram: / lucywalkerjewellery
💻 Facebook: / lucywalkerjewellery
👥 Facebook group: / 305351559875461
📌 Pinterest: / lucywalkerjewelleryaca...
Thank you for watching!
#flushsetting #flushsettingstones #jewelrymaking
27 авг 2024