In this MAHLE installation video, learn why and how a car air-conditioning system is flushed.
►Subscribe to the MAHLE Channel: bit.ly/2BwR2EX
►DTM Hockenheim Vlog: • Grandioses DTM Hockenh...
Here are the most important steps for flushing the refrigerant circuit:
1. Draw off refrigerant completely
2. Remove the compressor
3. Remove and bypass the dryer or accumulator and throttle or expansion valve
4. Connect the connecting hose from the flushing kit to the high-pressure line on the vehicle
5. Connect the red service line to the low-pressure line on the vehicle
6. Connect the blue service hose to the flushing kit outlet (filter)
7. Flush the circuit against the direction of refrigerant flow
8. Replace parts that were removed, replace seals
9. Bleed the system and fill with refrigerant
10. Carry out a final performance and leakage test
Have fun with the video of flushing the air conditioning system (AC System)!
▬ Favorite Videos ▬▬▬▬▬▬▬▬▬▬▬▬
►EXTREME Performance with MAHLE and JP Performance: bit.ly/32ZQxy5
►MAHLE careers: bit.ly/2MWdLzr
►MAHLE Aftermarket: bit.ly/2Ws2dXG
►All official MAHLE Videos bit.ly/2JxzAn1
▬ About this channel ▬▬▬▬▬▬▬▬▬▬▬▬
MAHLE is a leading international development partner and supplier to the automotive industry as well as a pioneer for the mobility of the future. The MAHLE Group is committed to making transportation more efficient, more environmentally friendly, and more comfortable by continuously optimizing the combustion engine, driving forward the use of alternative fuels, and laying the foundation for the worldwide introduction of e-mobility.
▬ Website ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
►www.mahle.com
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
ru-vid.com?searc... ru-vid.com?searc... ru-vid.com?searc...
29 апр 2019
