Folding Plasma Table for my Welding Cart

Подписаться 262 тыс.

Просмотров 70 тыс.

50% 1

Since I Acquired a plasma cutter recently it would be time to make a plasma cutting table for my multifunctional welding cart wich has already a folding welding table attached to it. But you can just weld on two more legs and use it as a separate table.
I took the same design and welded in some 30x3mm flat bars that are curved( the curves support the workpiece when you cut straight lines) And made a hinged pan for catching the sparks and the small offcuts. The legs are height adjustable to accommodate for uneven floors.
Thank you very much for watching!
Big thanks to all my patrons especially Sithis Michaelis, Nerd Inventor, and Larry Radcliffe!
If you like my videos support me on Patreon: / ollaris
Favorite tools in this video (affiliate):
Plasma cutter:
German link: amzn.to/2Y8izZW
USA link: amzn.to/2K1eRsp
Metal cutting Bandsaw:
German link: amzn.to/2ykS2Ju
Visit my Website: www.ollaris.tv
Subscribe for more videos: / ollaris
Twitter: / ollari_s
Instagram: / ollari.s
Music by Epidemic Sound (www.epidemicsou...)

Опубликовано:

16 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 137

@whazee 5 лет назад

I dont even know how you come up with the process steps let alone the design and making! Amazing job dude! 👏😮

@Ollaris 5 лет назад

Thanks a lot Billiam!

@robvanza 5 лет назад

Your workshop is coming along nicely! The folding table was a great idea!

@Ollaris 5 лет назад

Thanks Robert! It’s getting there.

@reforzar 5 лет назад

I didn’t realize this was a harp build too! Awesome!👏🏻👏🏻👏🏻

@Ollaris 5 лет назад

😅😊

@xcnpeanutx 5 лет назад

Wie üblich absolut TOP gebaut und überlegt. Ich mag weiterhin deine Videos sehr gern. Wenig gequatsche, dafür viel zeigen des Handwerks. Sauber und weiter so!!!

@Ollaris 5 лет назад

Vielen Dank!😊

@allthings2allmen 5 лет назад

I have never seen anything like this before, cool idea! Nice musical touch to btw.

@Ollaris 5 лет назад

Thank you very much Jason!

@TheMessyStudio 5 лет назад

Great job, Sebastian! That will certainly get it done. Billy

@Ollaris 5 лет назад

Thanks Billy!

@patrickmckowen2999 4 года назад

Great addition From my research to see what I want to build - I am finding your design the most practical. Cheers

@Ollaris 4 года назад

Thanks Patrick!

@Wooddust6 3 года назад

Music to my ears and nice build to boot. Think ill try something similar.

@EnethMade 5 лет назад

Awesome build, and that chevron pattern gives it a great look too! I think I must learn how to weld, your projects are really inspiring! 👍

@Ollaris 5 лет назад

Thank you! Yes! You should! It is a lot of fun!

@Dingbat217 4 года назад

That's a great extension to your welding cart / table. :-)

@Ollaris 4 года назад

Thanks!

@MCsCreations 5 лет назад

Fantastic work, dude! Really well thought and done! 😃

@Ollaris 5 лет назад

Thank you!

@chybz 5 лет назад

Nice heavy duty harp :D Thank you !

@Ollaris 5 лет назад

😅😂

@JohnMadeit 5 лет назад

Great build with lots of good thought out features

@Ollaris 5 лет назад

Thanks John!

@husk79 5 лет назад

awesome build and cool editing with the music!!

@Ollaris 5 лет назад

Thank you very much!

@marcinsykut497 5 лет назад

Very nice and ergonomic table.

@Ollaris 5 лет назад

Thank you!

@alanscannell 5 лет назад

Ah mate that's a great set up for your cart. Very clever 👍 that harp had me laughing 😂

@Ollaris 5 лет назад

😊

@micjbaron 4 года назад

That’s a great project. Thanks for the ideas and inspiration!

@minor805 2 года назад

Well done!

@frederiklansu270 Год назад

Nice work 👍🏻

@zoozolplexOne 3 года назад

Cool project

@kjellski 5 лет назад

What a brilliant idea again Sebastian! Man You were missed at the Maker Faire! :( hope to see you next year as well❤️🤗

@Ollaris 5 лет назад

Thanks man! Hope to be there!

@Bricoleando 5 лет назад

Buena mesa para cortar con el plasma. Muy practica. Un buen trabajo. Saludos.

@markosabolic 5 лет назад

Oh man, I'm thrilled! Nice job!

@Ollaris 5 лет назад

Thanks Marko!

@eddique 5 лет назад

Great build as always!

@Ollaris 5 лет назад

Thank you very much!

@andyjones3068 4 года назад

Excellent build! Subscribed

@Ollaris 4 года назад

Thanks Andy!

@yellowmetaldriver1460 3 года назад

Nice table but going to be a PITA to replace the sacrificial slats

@Ollaris 3 года назад

Don’t worry. Those are just spot welded.

@elgilligan6616 4 года назад

Nice job!

@JENNISWISS 5 лет назад

sehr sehr clever! tolles video🍀👍

@Ollaris 5 лет назад

Dankeschön Lukas!

@DIYFixMan 5 лет назад

Nice job! I love your video

@Ollaris 5 лет назад

Thank you very much!

@SNMCustomWork 5 лет назад

Nice table, like other things of your workshop.

@Ollaris 5 лет назад

Thank you

@bernhardtammen4463 5 лет назад

Das hast du wieder feine Arbeit gemacht Schönen Gruß aus den Saterland

@Ollaris 5 лет назад

Dankeschön Bernhard!

@timberdish 5 лет назад

Very cool! Nice job, man :)

@Ollaris 5 лет назад

Thank you Matt!

@AndyCPugh 5 лет назад

Great idea! Cool edit.

@Ollaris 5 лет назад

Thanks Andy!

@InformatrIIcks 4 года назад

I love the editing !

@tomgod100 5 лет назад

good idea

@zsoltsworkshop7866 5 лет назад

Nagyon jó kis videó vágás ! Szép munka !

@Ollaris 5 лет назад

Köszi szépen!

@mopemaster 5 лет назад

Klasse Projekt und Umsetzung Sebastian ✅👍🏻🤙🏻

@Ollaris 5 лет назад

Dankeschön Axel!

@fabry400 4 года назад

Lavoro perfetto! Bravissimo!!

@mustafamemat7707 5 лет назад

لديك آلات عمل جداً رائعه أنته مبدع دائما في عملك

@kerrywil1 4 года назад

Very nice work

@garagemonkeysan 5 лет назад

Nice video.Great project. Mahalo for sharing. : )

@Ollaris 5 лет назад

Thank you 😊👍

@fredalmond9130 5 лет назад

That is a great idea for my everlast welding cart.

@mkbcoolman 5 лет назад

Brilliant.

@dakotamax2 4 года назад

Slats are sacrificial - seems like they should not be welded into place but looks great!

@jakefriesenjake 11 месяцев назад

Depending on how much you will cut with the plasma. In a shop with a cnc bed, cutting out art for 10 hours per day, then ya, I'd make em replaceable!

@devilpit 5 лет назад

Nagyon ötletes szerkezet! Gtatulálok! Zárt térben ha lehet csak maszkban vágj, vagy szellőztess! Nagyon durva gázok keletkeznek vágáskor! A video ismét hozta a maximális pontszámot. Csak így tovább!!!

@Ollaris 5 лет назад

Köszi! Igen, mindenképp. vennem kell legalább egy 5ös szemüveget mert a maszk nem fèr be a pajzs alá.

@devilpit 5 лет назад

@@Ollaris iweld fantom 4 alatt a 3M maszk nekem tökéletesen elfér, ki is látok. A maszkra a 2138 szűrőbetét pedig pont ideális a mérgező gázok ellen. De az 5ös szemüveg is jó választás, és biztos lényegesen kényelmesebb is, mint a pajzs.

@Ollaris 5 лет назад

peter blond na akkor szétnézek hogy valahol boltban találok e olyan pajzsot. Ugy is ideje lenne már beruházni egy normálisra!

@devilpit 5 лет назад

@@Ollaris újban lehet már nem találsz, de érdemes kikérni az eladók véleményét a visszajelzésekről, plusz maszkban próbálgatni a pajzsokat.

@brads3111 4 года назад

Dang that's slick!!

@Ollaris 4 года назад

Thanks!

@Mr.Stacey-L-SCC 5 лет назад

That is very cool.

@Ollaris 5 лет назад

Thanks!

@kannado 5 лет назад

Coole Idee und Design.

@Ollaris 5 лет назад

Dankeschön

@FredMcIntyre 5 лет назад

Nice job! 😃👍🏻👊🏻

@Ollaris 5 лет назад

Thanks Fred!

@user-ec1sz9hi6j 5 лет назад

Compactness, of course, is good, but it would be more efficient to make a watering can instead of a straight bottom with a slight bias towards the center, plus where the waste will go ... in general, to create a semblance of a funnel.

@jaldemirbatista7603 5 лет назад

Fantástico! Você é um artista serralheiro! Muito obrigado.

@facundozarate5030 4 года назад

Gracias por compartir este excelente trabajo e idea

@masterfrank1985 5 лет назад

good Job!!!!

@Ollaris 5 лет назад

Thanks Frank!

@joshyingling 4 года назад

I know most of the slag catchers are funnel shaped, does your limited space under the surface of the table cause issues with liquid metal blowing back up? Great design BTW, just curious to know after a few months of using it

@WCRichardson100 2 года назад

Great Job!!!! This is what i was thinking about. Your vid has given me a broader perspective for options. And since this is Metal fabrication porn the 70s porn music is a nice toch lol. Thanks again. How is the slag and dust containment when cutting. I have seen high dollar machines with a water table but don't think I will be it constantly.

@hea5843 4 года назад

Could this table/cart get any better?! Great work!

@Santi_Arg 5 лет назад

Excelent 👏👏👏👏👏👏🇦🇷🔧🔩⚒⛏🔨

@michaelhaser5819 5 лет назад

Cool....! Zur Not kannst Du auch ein halbes Schwein drauf grillen. ;-) LG Micha

@Ollaris 5 лет назад

Yep! Dankeschön

@dash8465 10 месяцев назад

0:40 your blade appears to be put on backwards 😂

@susuys 5 лет назад

Great build! What is your opinion about Scheppach band saw? How much sideplay does it have? Is 90 degree really 90 degree? I'm thinking about buying one. Thank you, and keep up the good work! :)

@Ollaris 5 лет назад

It’s surprisingly sturdy! I haven’t had any problems with the accuracy although i don’t use the degree scale that is stamped on the base. Always use an angle finder or a square. I don’t have any experience with other metal cutting saws but it is soooooo much better than using an angle grinder or a “cold”saw.

@eltallerdejohnys 5 лет назад

Muy bueno un abrazooo!!!

@martinwolf5957 5 лет назад

Genial 👌 perfekt. 👍 👍 👍 Gruß Martin 🙋‍♂️

@Ollaris 5 лет назад

Dankeschön Martin!

@jameshulet7969 3 года назад

I would like to know how you plan to replace the slats as they get cut up from the plasma torch. Not all cuts are straight.

@Ollaris 3 года назад

That’s the reason why I just tacwelded the bars into place. Quick cut with an angle grinder and in goes a new piece. Simple as that.

@1979cvx 2 года назад

I would like to know more about your horizontal band saw that you used in this video. Did you build it? If so, how?

@Ollaris 2 года назад

Yes I made a video about that too!

@albertjosephful 5 лет назад

Muy bueno !....👏👏👏

@asztapaszta9 5 лет назад

Nagyon király!

@Ollaris 5 лет назад

Köszi!

@gavlanthedwarf7544 5 лет назад

Richtig geile Ideen die Du da hast, gefällt mir sehr👍 wollte nur kurz fragen was Du für einen kompressor hast🤔 Danke im voraus😀

@Ollaris 5 лет назад

50l zwei Zylinder.

@Ollaris 5 лет назад

Aber ein kleiner 25l noname würde auch gehen.

@louloutb56 5 лет назад

Belle établi beau .travail

@kerrywil1 2 года назад

why the chevron pattern? it is just for looks?

@jesussaves5062 5 лет назад

👍

@HolzBastlerbayern 5 лет назад

Sehr gut! Aber wann kommt mal wieder was aus Holz?

@Ollaris 5 лет назад

Natürlich! Nächstes mal,wenn nichts dazwischen kommt! 😉

@HolzBastlerbayern 5 лет назад

@@Ollaris ok!

@uriember100 5 лет назад

Nagyon szep munka,aza schepach szallag vago menyibe fajt kb.?koszi

@Ollaris 5 лет назад

Köszönöm. 75 körül.

@uriember100 5 лет назад

@@Ollaris koszonom a valaszod,esetleg ha eszedbe jutna hogy honann rendelted?koszonom szepen

@sevensenseification 5 лет назад

Bist du zufrieden mit der Scheppach Bandsäge? Grüsse

@Ollaris 5 лет назад

Ja! Die ist mega gut! Nie wieder winkelschleifer!!!

@nexromancer 5 лет назад

Do you have a video on the jig for the hand saw

@Ollaris 5 лет назад

No, it came with that stand

@manuelcord101 2 года назад

Where did you get the band saw stand?

@Ollaris 2 года назад

Came with the saw.

@Claudio-rm4wc 5 лет назад

Coole Idee, aber brennt der Tisch nicht weg? Da gehört doch Wasser rein, oder nicht?

@Ollaris 5 лет назад

Nein kein wasser. Meine Maschine kann maximal 12mm stahl schneiden. Und das Blech ist 60mm entfernt. Da kommen nur funken an.

@Claudio-rm4wc 5 лет назад

@@Ollaris Achso.. Dann ! Top!

@bogdannastic7287 5 лет назад

Great! What are the dimensions of the profile?

@Ollaris 5 лет назад

30x30x3mm and 60x30x2mm

@LeVita_Ru 5 лет назад

123