Force Carbonating: Shake Method and using a Carb Stone

Подписаться 29 тыс.

Просмотров 64 тыс.

50% 1

These are the two ways that I carbonate my homebrew. The 'shake method' as I'm calling it, doesn't require extra equipment other than your keg and CO2 system, but if you're interested in trying the "carb stone method", check out the link to the carb stone an lid combo that I use. *Equipment links below!
Wanna try my brews? Help bring Flora Brewing to city near you! Support my fundraiser: www.gofundme.com/f/florabrewing
If you want my videos early / ad free + monthly happy hours + merch join the Patreon! / florabrewing
Check out my new podcast Brewing After Hours, now streaming!
Bleav Podcast Network: bit.ly/2OHm4CK
Apple: apple.co/3vemvoP
Spotify: spoti.fi/2N9XFFt
Stitcher: bit.ly/3vf7MKi
Google: bit.ly/3crNi8F
Amazon: amzn.to/3rERmbU
Carbonation Stone
amzn.to/32qfNfN
Anything you need for your CO2 system
www.morebeer.com/category/co2...
Kegs
www.morebeer.com/category/cor...
Carbonation Charts
www.kegoutlet.com/keg-carbona... (This one has styles and instructions listed)
More Carbonation instructions
brulosophy.com/methods/carbona... (They include the set it and forget it method there)
For everything else Flora Brewing:
/ flora_brewing
FloraBrewing.com
/ florabrewing
/ florabrewery
/ florabrewing
/ brewingafterhours
**Sign up for my email list here: rebrand.ly/FloraBrewsletter
music: bensounds.com
#CarbonatingBeer #LearntoBrew #Homebrewing #Brewing #CraftBeer #LearntoHomebrew #MakeBeeratHome #Homebrew101 #Beer #FloraBrewing #SarahFlora #BrewingEquipment #HowToBrew #DIY

Хобби

Опубликовано:

6 ноя 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 93

@curtpick628 3 года назад

The carb stone is simply a pneumatic sinthered filter. Of course all the homebrew shop sells them for a good chunk of money. You should be able to pick them up for under 3 bucks. Good video.

@shanejorgensen8806 3 года назад

Hey ya. Great video. Another way to use the carb stone with chilled beer is 30psi 10sec feed of carb vent 1 sec through prv. This will carb beer in about 7 to 10 minutes.

@MIA-hc7nm Год назад

Thank you so much for this video! I have a mobile cocktail tap bar. We started 2 months ago and have been learning a lot since then but carbonating the kegs with the shake method has been taking us like 3 hours! I will buy this lid RIGHT NOW and try it!

@bensigl3766 3 года назад

Thank you for saying "I normally have a hard time" with that lid. I just got one and it is wayyy more finicky than a normal lid.

@michaelbrightman2204 3 года назад

Would love a video on what kegs you think are the best too use and where you might get them. Thanks for all the great videos!

@dadsdrinkingbeers6729 4 года назад

Awesome job!!!

@edwardelliott8028 3 года назад

i enjoyed the video, my wife likes the fact your showing that women like to brew too. i enjoy that you are good at explaining what your doing, your not assuming we already know what your talking about. and if i already knew it, you just confirmed it. thank you

@Dab3stxblasassassin 3 года назад

Big fan of yours and am doing my first keg carb. So I'm super happy to see this video in you arsenal.

@johnribeiro464 Год назад

Super informative - thanks

@petercoathup5305 4 года назад

The tube connected to your carb stone will be full of air. It's only a small amount but if you run gas through it prior to purging the keg you could eliminate it from your beer.

@FloraBrewing 4 года назад

Good tip!

@erichlf 3 года назад

The lids with static pressure release can be centered by pushing the gas in valve with a screw driver. No need to connect a disconnect.

@apollosassasincreed4038 Год назад

you're pretty great! Fantastic video!

@danssv8 15 дней назад

Gr8 video love

@charlessherman7335 4 года назад

You can purge the tank without a spare ball lock connector, just push in the center of the gas side. I normally use a metal chopstick wrapped with a rag in case any beer comes out.

@FloraBrewing 4 года назад

Yeah it's just easier with one

@kevintaylor7660 4 года назад

Nice work! You could connect to the gas in post and lay the keg down as you did but keep the gas post to the bottom, it should have the same effect because the post is submerged with the beer.

@FloraBrewing 4 года назад

Totally. That's how I used to do it but now sometimes I just leave the co2 connected and don't roll. Brulosophy has a good podcast on carbonating too!

@hobbeeswe7472 2 года назад

@@FloraBrewing Phew. That is exactly what I have done with good results, i.e. regular gas post, oriented to lowest possible point when rolling. I would even argue that this method lets the CO2 into the keg at a lower point that thorugh the "beer out post". I am now thinking about whether to get a carb stone or invest in in a unitank. Do you have any advice on this Flora?

@kgakoh0 3 года назад

Love this video... my beer will now be ready for Christmas lunch tomorrow.. thanks again for all your videos and help... have a great Christmas ..

@davidapplegate1849 3 года назад

Hey Sara. How do you deal with the foam? Some of my beers are like a foam bomb in the keg. It takes forever to calm down .

@knightmare1015 Год назад

Another great video. Where do you get your CO2?

@andrewtitcombe8378 Год назад

Can the carb stone be attached to the keg co2 permanently for that batch. And just drop to serving pressure through the stone when tapped. I am thinking this would add some carbonation while serving or do you think it will increase the chances of f foaming in the glass?

@jlhankison 4 года назад

Cool shirt! My buddy works at Mobcraft.

@FloraBrewing 4 года назад

Awesome!

@richardwilkinson77 2 года назад

I'm pretty sure that here in the UK (and probably in Europe generally) the liquid and gas posts are slightly different sizes and you can get the ball lock connectors jammed on if you put the gas line on your liquid post. Can anyone confirm this?

@centerflag982 Год назад

Never actually done force carb before, so I might be missing something - but I'm confused about the venting and then bringing it back up to 20 PSI. If the rolling should already have gotten it to full carbonation, wouldn't storing it under that high a pressure risk overcarbonating it? I would've thought storing it at just serving pressure would be a safer approach

@DickiesBeerReviews 3 года назад

CHEERS!

@420brewer 2 месяца назад

When is the right time to carbonate the beer?? Im a beginner and i need some tip!! Pleas help me 😁

@lisaken1204 2 года назад

For how long is the gas open?

@bobd7855 3 года назад

Additional trick for ya..get a carb chart and find the amount of CO2 ya want for the temp. of the beer. Shake it as normal but when you think you're close, shut the valve off on your tank, and keep shaking. The low pressure gauge will stop dropping at the carbonation level in the beer. Keep opening and closing the valve until you hit the desired psi. With a cold keg and a carb stone, it may only take a few minutes.

@FloraBrewing 3 года назад

Great tip!

@PEEPSBTRG 4 года назад

Hey thanks for the video is there anyway I don’t have to mod a lid and just connect the stone on the silicone line to the co2 inlet

@FloraBrewing 4 года назад

I don't see why that wouldn't work!

@shanejorgensen8806 3 года назад

They are a tight fit but can make it work. Got to really watch beer going back to regulator though. NRV highly recommended for this system

@Daemiex 4 года назад

jenni downstairs probably thinks your humping when your carbing your beer, blanket or not lol sounds a sucker for traveling :p

@FloraBrewing 4 года назад

She usually asks me if I need help moving the body

@jamesmihalcik1310 4 года назад

@@FloraBrewing :) Good neighbors, hard to find! :) Great personality, experience and knowledge you bring to the channel. Like hanging with friends, talking brew. Subscribed! Thanks from Pennsylvania.

@StagArmslower 3 года назад

Could you connect the stone line to short post on gas side inside the keg instead using specialized lid ?

@FloraBrewing 3 года назад

in theory yes but it's probably not the best to use as your gas line for serving

@joshuapinter 2 года назад

And also, it's not a barbed dip tube so it will definitely require a clamp. And trying to tighten a clamp on that while it's in the keg would be a PIA. Not impossible, though, and good thinking.

@foreplay24 4 года назад

I currently cold crash after fermentation, transfer to keg, and then hit with 30psi for 24 hours to carbonate. If i changed out the lid on the keg, added a carb stone, I could carbonate in less than 24 hrs??? Sounds awesome, if possible.

@FloraBrewing 4 года назад

Yeah you can do it in a couple hrs its wild and helpful in a pinch

@shanejorgensen8806 3 года назад

With carb stone you could do it I. 10 minutes. With the right technique

@craig9265 3 года назад

I tried connecting the gas line to my beer out post to begin carbonating my key and beer shot up the line to the regulator. Be careful that this doesn't happen.

@greglindstrom1705 3 года назад

you say you dont drink a beer for 3 weeks or so. so do you just leave in the fermentor for that time or do you store it in kegs for 1 or so weeks??? noticed on my first kegging run it took 4 days after kegging 2 weekes in fermentor before it was drinkable.

@FloraBrewing 3 года назад

They usually are in the fermenter for 2 weeks and kegerator for 1. If you use floating dip tubes you can drink way earlier, I usually force carb and drink the next day when I use a floater.

@greglindstrom1705 3 года назад

@@FloraBrewing Thank you I will give it a try is filtering beer ever worth it?

@bensigl3766 3 года назад

Having now carbed a couple things (a sour ale and a cider) with the keg carb lid, I can honestly say that her method has worked out better for me than the directions that come with the lid. I'll be using the 15psi method from now on, starting with a Juicy NEIPA that has been chilling over the last 24hrs. Should be good and cold!

@FloraBrewing 3 года назад

Glad it worked for you!

@b.e.d.brewing3909 3 года назад

I heard someone state that they go from kettle to dispensing his keg in seven days I don’t know what style he was able to perform that magic. I thought to myself “that sounds gross!”

@FloraBrewing 3 года назад

probably using a kviek yeast it's a beast!

@b.e.d.brewing3909 3 года назад

@@FloraBrewing ahhh yes, that is a good point :-)

@MrLibbyloulou 4 года назад

Why not just connect your carb stone to the gas in post.? would that be a problem do you think....? thumbs up anyway.....

@FloraBrewing 4 года назад

It just comes connected to the lid. Gas post should be fine but then you can't remove it if you wanted to.

@b-gill9224 3 года назад

Is it necessary to purge the oxygen before rolling?

@FloraBrewing 3 года назад

Yes. In general purging oxygen before you do anything with finished beer is wise.

@eddiehoffmann9752 4 года назад

Great video. What's the purpose of the carb stone? I force carb my beers at 30 psi for 36 hrs at 35 degrees. I then reduce the pressure to 12 psi and let it sit for 24 hrs then it's ready. How does using a carb stone differ then the method I use? Does the carb stone continually produce bubbles during the process to speed up carbonation? Are you going to do a taste test between the rolling method vs carb stone? I did the rolling/shaking method once and the beer sucked. That was the only difference I did so for some reason that method produced off flavors.

@alexanderbullen-genis7575 4 года назад

I've heard doing the shake-method can cause a bit of a carb bite to your beer (but i've never experienced that), but for the carb stone in my experience, I've carbonated a 5 gallon batch (NEIPA) in 24 hours to 2.7vol. Worked great and both methods have their advantages. Hope that helps a bit.

@michealbradford7963 4 года назад

if i buy the regulator and hose then all i need is a corny keg to carbonate my ginger brew i will use 30 psi for the keg right ?

@eddiehoffmann9752 4 года назад

@@michealbradford7963 For beer I go 30 psi for 30 hrs then purge and reset to 12 psi. After 30 hrs it's not 100% carbed. You can prob go 36 hrs at 30 psi. For me after 36 hrs its carbed enough for me. 48 hrs even better.

@junior103190 4 года назад

Eddie Hoffmann i tried this method and i kept getting foam but im sure i let it goo too far, i think maybe actually setting an alarm for 16 hours that way its all good

@shanejorgensen8806 3 года назад

Hey Eddie. To answer your question. The stone adds the co2 at a lot finer micron so it enters the beer a lot quicker. Making carbonation faster

@junior103190 4 года назад

Soo how many hours would you say it sits at 15psi?

@mattmcgowan7491 3 года назад

I think she said overnight. After that adjust to serving PSI

@toenyo 3 года назад

Thanks for the info... HI Does anyone know if I can force carbonate my 20L 30L or 50L Kegs, With Soda Stream Type Gas Bottles... I have lots of soda stream gas bottle thanks

@hnphnp1 2 года назад

You can try but you'll risk making a foamy mess inside the bottle.

@toenyo 2 года назад

@@hnphnp1 its the kegs not the bottles. i have now done it and it works perfectly ;)

@Rockit66 3 года назад

I just put my kegs in the fridge and get them between 0-4°C. Then turn on 3 Bar = 43 psi for 24 hours. done! U used to try shaking too, but when u have more than one keg to karb, shaking as a B*ch. Much more relaxig to connect all at the same time, and go to sleep. Then beer is ready for friday night. :) Yes it does taste better with some storage, but one does not need to drink all at once. :)

@hobbeeswe7472 2 года назад

Hi. You are the only person, except my local brew store to use this method. I just bought a D-stone with C-keg lid and for my first quick carb I intend to do EXACTLY as you have done. I am hoping to bottle after a day of rest. My only question is, the 3 bar and 24 h is that for lager, and how do you carbonate ale etc?

@Rockit66 2 года назад

@@hobbeeswe7472 usually 3 bar is a bit much. I had to fine tune it betweene 2,5 -3 bar

@hobbeeswe7472 2 года назад

@@Rockit66 Big txs Rockit. I am doing a lager with the - D-stone for the first time. I will follow your advice of 2,5 bar, after all, I can just add time and pressure if it should be too flat. I did however initially unleash from 0 to 3 bar in maybe 30 seconds... Any suggestions for ramp up?

@Rockit66 2 года назад

@@hobbeeswe7472 Just connect, turn up too 2,-3 bar and wait 24 hours. easy peasy.

@johneagle2100 4 года назад

I think I will stick to pressure brewing.

@FloraBrewing 4 года назад

That's on my list to test out

@johneagle1855 4 года назад

@@FloraBrewing if you want some info don't hesitate to ask.

@ahubrig83 4 года назад

Where did you get that label for your keg?

@FloraBrewing 4 года назад

Eagle Rock HBS

@ahubrig83 4 года назад

@@FloraBrewing omg thank you!!

@odwinomarolivarguillen9880 Год назад

Definitivamente la mujer más interesante del mundo 😍

@s.venkateswarpatnaik2484 2 года назад

My Request to you please supply such machinery to my place Bhubaneswar city in Odisha state in India

@frankenstein6677 3 года назад

Physics is a beautiful science.

@FloraBrewing 3 года назад

Science is power

@tedwilson6420 2 года назад

Well I think I just fell in love, she's too cute. The info also helped...🤣😇🥰

@dennisschickling5759 4 года назад

At 5:00 You should Purge the Keg.

@FloraBrewing 4 года назад

It was closed transferred so shouldn’t be able to pickup any O, right?

@DJRaveDave 2 года назад

Id just like to mention that the carb stone method is not recommended for IPAs as you will loose a lot of the flavour as you scrub the beer with co2. Just pressurise to like 30-40 and shake for 20 mins. Repeat if you really need to.

@joshuapinter 2 года назад

Is this true? I've never heard this. Plus, it's a closed system so where would you be scrubbing it to? Even if some molecules are "scrubbed" into the head space, it would quite quickly redissolve into solution, unless you are venting the PRV or something.

@HakonJonsson2501 4 года назад

This Carbstone does not make any difference. Just cool the beer down to 35 F and set it at 40 psi for 24 hours and then turn in down to 12 psi for 48 hours and your are golden. Save these 25 dollars. And just connect the gas to the gas, it does not have to go down the liquid post. Happy brewing.