Ford 302 Cylinder Head Rebuild

Autorestomod Manic Mechanic Gasoline Media

Подписаться 113 тыс.

Просмотров 19 тыс.

50% 1

We tear down and refinish a set of Ford 302 Cylinder heads for our 1967 Mustang.
Episode 594 Autorestomod
We cover things to look out for. How to lap valves. Compressing valve springs.
Tools:
Lisle 44300 Valve Spring Compressor
www.amazon.com/Lisle-44300-Va...
Hand Valve Lapper Set, Valve Lapping Grinding Stick Tool, 2 Ended Suction Cups,1-3/16-inch,1-7/16-inch,5/8-inch,3/4-inch Cups
www.amazon.com/Lapping-Plasti...
Jford@autorestomod.com
Insta: @autorestomod
www.patreon.com/gasolinemedia
Sponsors:
www.npdlink.com
Insta: @npd_nationalpartsdepot
www.eatondetroitspring.com
Insta: eatondetroitspring
Facebook: / eatondetroitspring
www.rrsusa.com
Insta: @rrs.usa
Facebook RRS USA
00:00 Ford 302 Cylinder Head Disassembly
01:26 3D Printed Valve and Spring Tray
02:39 Cleaning the 302 Ford Cylinder Heads
07:01 Lapping Valves into our Ford Cylinder Head
11:56 302 Ford Valve Guide Test
12:51 Deburring Heads (NOT always needed)
14:28 Sanding Head Surface for Good Mating of Gaskets
17:25 Ford 302 Cylinder Head Assembly
25:35 Join Us on Patreon

Авто/Мото

Опубликовано:

5 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 43

@Paulie1232 Год назад

Absolutely spectacular 👌 🙌 you need to get a RU-vid award. ..

@AutoRestoMod Год назад

Wow, thank you!

@RealWorldGarage Год назад

I have a good size piece of marble countertop from where we up graded our kitchen. It’s one expensive ass piece of cylinder head flattening table. LOL. They have to cut the opening for the cook top on site, so the installers tried to load the rather large cut out on their truck. I caught them on the way out the door and was like I’ll take that, thank you.

@AutoRestoMod Год назад

Nice! We have a granite shop near here and I've told the old dude I would take a 40x15 section if he had some to spare.

@markhawkins6276 Год назад

Love the graphics of the frequency changes when lapping in the valves. Great video.

@paulbruno8327 Год назад

Great video! 🏆 simple and straightforward, which makes this one of the best videos of its kind! I need to do my 302 heads, but unfortunately I don’t have a garage anymore. Again, great video guys!!! 🏁

@thomaslockley945 Год назад

I need to see the run stand when y'all make it lol

@curtcooper9447 Год назад

Loved the show vary informative and practical thanks from a small block ford fan.

@blackforestvintagefords7872 Год назад

Thank you very much for showing the process!

@RealWorldGarage Год назад

That’s pretty much how I do it, the only thing I didn’t see you do was settle the keepers. It’s old school and how my old man trained me. Take a ball peen hammer and tap the top of each valve, it helps the valve keepers settle.

@AutoRestoMod Год назад

Yes, Cam did that off camera but I want to show it on the final assembly video.

@thomaslockley945 Год назад

Great video an lots of tips n info thanks

@johnhennery8820 8 месяцев назад

I found if you put a good hand lotion on be for you start getting your hands greasy the grease won't suck into your hands grease will wash off your hands really easy just a tip

@AutoRestoMod 8 месяцев назад

Nice tip!

@user-jc7ct4nr8l 8 месяцев назад

excellent job .

@AutoRestoMod 8 месяцев назад

Many thanks!

@blakeneysanders4264 Год назад

That was very detailed and informative. Thanks for a great video.

@AutoRestoMod Год назад

Glad it was helpful!

@4thGloryMonday Год назад

congrats on 100k

@AutoRestoMod Год назад

Thank you!!

@adolfoduenas4022 10 месяцев назад

hello. Thank you very much for the video. I have a couple of heads like that, with fixed bolts for the rocker arms. They told me that I had to change a couple of bolts because they are stripped. It is very difficult to change them, how do you recommend doing it? Thank you very much for your attention.

@NathanielRatthamone 24 дня назад

I need to know where you got the tool for the valves 😂 I see it keeps it seated while compressing the spring. 🔥

@NathanielRatthamone 23 дня назад

In the meantime I would like to know a another way to keep the valve seated so I can take my keepers n retainers out

@AutoRestoMod 22 дня назад

If you are only doing a umbrella seal replacement you can actually get a tool that screws into the head that you can use compressed air to keep the valve for it needs to be . You want to be able to maintain about 60 PSI to keep the valve where it should be.

@AutoRestoMod 22 дня назад

If you are trying to do this with the valve in the head and the head on the engine you can pull that particular cylinder up to top dead center, both valves closed, and use a device that you screw into the spark plug hole to hold pressure from a compressor. This will allow you to compress the spring and remove the keepers and then get to the umbrella seals if that is your goal

@redsmerf Год назад

And where can you find a thick piece of glass big enough to do that on? Ikea. No joke.

@alexhaynes7483 9 месяцев назад

What valve stem seal set did you use?

@AutoRestoMod 9 месяцев назад

Fel-Pro

@preacher031163 6 месяцев назад

Im confused,why would u not install new valves n seats while ur inside?

@AutoRestoMod 6 месяцев назад

Money.

@Paul1958R Год назад

D7OE-DA heads. Very low compression with those big chambers.

@offroad4x4nhlife45 Год назад

Head cleaning= bead blaster

@ferdinandcuevas8457 Год назад

You should wear 👁️ protection be safe.

@fredflintstoner596 11 месяцев назад

Mrs Richards: "I paid for a room with a view !" Basil: (pointing to the lovely view) "That is Torquay, Madam ." Mrs Richards: "It's not good enough!" Basil: "May I ask what you were expecting to see out of a Torquay hotel bedroom window ? Sydney Opera House, perhaps? the Hanging Gardens of Babylon? Herds of wildebeest sweeping majestically past?..." Mrs Richards: "Don't be silly! I expect to be able to see the sea!" Basil: "You can see the sea, it's over there between the land and the sky." Mrs Richards: "I'm not satisfied. But I shall stay. But I expect a reduction." Basil: "Why?! Because Krakatoa's not erupting at the moment ?"

@blakeneysanders4264 Год назад

It wouldn't let me do 25 cents 😆

@AutoRestoMod Год назад

Well, CRAP! We'll say that it is .25. Yoou get that coveted shout out. LOL

@blakeneysanders4264 Год назад

@@AutoRestoMod that'll work lol

@josephcross6327 Год назад

Gooey chewy yummy paraffin baby

@413x398 Год назад

D7 heads? Really?

@MrGsxr10001 7 дней назад

Aint no dam way I'm gonna watch a fast forward with no voice for teaching and listen to that stupid music for 30 mins. I came to learn how to take apart a set of heads? I made it to 3.33 and I'm out LOL!

@AutoRestoMod 7 дней назад

We only fast forward when talking isn't done. Normal video speed without talking is like watching paint dry or soap soak. Not sure how you can't "see" what we are doing.