Ford 7.3 Powerstroke Backpressure Sensor

Подписаться 57 тыс.

Просмотров 42 тыс.

50% 1

7.3 Powerstroke Backpressure sensor replacement. This one was bad and reading 53.3psi. I think this could be a major issue. Also installed a TS Performance 6 position flip chip as well as a heater control valve to try to help the a/c! Lets see how it works!
Get your Turbo John Racing T-shirts Here: www.TurboJohnRacing.com
Hang out with me live every Wednesday night for Tech Talk! Ask questions and share your setups. Join here: / @turbojohnracing
The baddest turbo's you can buy: www.forcedinductions.com
Cam Specialist, turbo needs: www.GetFPP.com
Mod Series Shocks: https//qa1.net
Torque Converters: www.hughesperformance.com

Авто/Мото

Опубликовано:

25 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 51

@pawpawsgarage4641 3 года назад

"Check Engine Light" should be on when Key On/Engine Off - It is a bulb check so you know it is working--- Have seen cars from used car lots with the bulb removed so customer didn't know they had an issue which needed attention. Nice vlog on all the little fixes!

@thesquirrelchroniclesakare7808 3 года назад

It's awesome that you keep improving ! Gotta go get em bro !

@jcnpresser 3 года назад

Getting her all fixed up. She’s gonna be a good one.

@chrislynn2076 3 года назад

I had a 95 chevy that the evaporator core was clogged up with dog hair and dirt. Cleaning it made a huge difference!

@tuckswanger 2 года назад

Thanks for all the help by your knowledge.

@miguelmendez4690 11 месяцев назад

from Guatemala 🇬🇹 good video my friend I, love it I, have a 7.3 2001 bless you America 🇺🇸 from NJ

@jeremyware8766 3 года назад

Next tow rig video is you switching your rims with John docs would be awesome video

@jims5852 3 года назад

Good stuff Tj!

@dockilljoy9017 2 года назад

I purchase same off Amazon, after market EBP sensor went bad under two month. OEM EBP sensor installed still 👍 8 months later.

@63chevyll30 3 года назад

the cover is for the high pressure pump gear bolt access.

@DeepSouthBayouDiesel 4 месяца назад

I've got the launch CRP123x and it works great for my 02 f350. And it's not super expensive like forscan or autoenginuty. Also, awesome video☺️👍

@johnclericuzio5782 8 месяцев назад

Thanks for this video. Where did you get the water control valve.

@n5ifi 11 месяцев назад

The way I understand it, the exhaust back pressure sensor controls the exhaust back pressure valve which is located under turbo on the turbo pedestal. I replace my Garrett factory Ford Turbo pedestal with a Garrett pedestal that doesn't have the EBP valve built in. Probably built for non Ford applications. The fit is perfect. You have to replace the original Turbo Exhaust housing with a exhaust housing that doesn't have the valve built into it or delete the valve from the original housing and block all the holes. Everything is fairly cheap and it's all pretty straight forward.

@Go4BrokeOffroad 3 года назад

Ford used those valves to help bypass the coolant before the thermostat was open. Without it, you'll go through heater cores often. Huge issue for the 92-97 trucks

@joshjones6805 3 года назад

You need to put a boost fooler on it and a wicked wheel in the turbo.. that's what I run... You also need to put a 6.0 trans cooler in it.. the 7.3 trans cooler is a 1/4 of the size of the 6.0... it's a easy job...7.3 are the best motors you can have just need to know the does and don't... Don't ever do the PVC delete you will burn the turbo up....

@Dirtnap300 3 года назад

hey i have had some great results with JB weld.. sure, you should replace that but hey, it could have been working like that for years?

@StevenCollects 3 года назад

Cleaning the evap coil in my 2001 made a huge difference. It wasn't terrible to pull but it wasn't great either.

@keithnoneya 2 года назад

Mine was a bear, the coupler was so froze up, someone used JB Weld on it to keep it from leaking so I had to change the Evaporator. Getting it back together was a real pain in the butt too. I noted that when you do it you have to do the bottom corner 1st, after that easy peazy. Best Wishes & Blessings. Keith Noneya

@rodneybohanan8572 3 года назад

John you lucky you in the country driving ,filming and watching a scanner you couldn't do that over here in C.A. Ha Ha!

@jorgefonseca9225 Год назад

Hi mate you have a new subscriber 👏👍 great vedeo and great explanation 👍 cheers from North of Norway 🇳🇴 👍

@TurboJohnRacing Год назад

Thanks for the sub!

@grapeseed12 3 года назад

Only buy the oem sensors I found this out the hard way.you may as well change out the crank sensor or buy a new one and put it in the glove box. Also watch the oil level if it is using oil it will shut down and won't start until you get the oil level corrected.the oil rings on the injectors sometimes erode and let oil bypass."this happened to me" I found out to only use the new oem injectors unless you like working on these things.

@Jgav15 Год назад

What kind of silicone did you use when you reinstalled the back plate?

@db7069 3 года назад

I have a 2001 F250 with a 7.3, love that thing. What tuner do you use and where did you get it? Also, there is RU-vidr named Fix-it-Nick that has done every upgrade imaginable on his 2000 F350 7.3, might be worth a look to you.

@treyivey5431 3 года назад

He has a TS 6 position tuner.. I have the hydra chip by power hungry performance on my 7.3. And me personally I like mine. I’ve had both

@justin_parks 3 года назад

That's the oil pressure switch that's jbwelded lol simple 1 wire switch, probably for the oil pressure gauge.

@joshuaking6191 3 года назад

Only problem with a programmer on a diesel and towing, is the trans doesn't pump very fast with low rpm diesel spins. Keeping the programmer turned down with that upgraded trans cooler towing will help help make the trans live. 7.3 will pull the load in OD it just builds alot of heat. Love the new truck btw

@drivewaybuiltfoxbodies5327 3 года назад

Any suggestions for a manual?

@NoWay-xu1ie Год назад

I pull a 14k lbs. 5th wheel camper. My trans runs cooler in OD . I have a BTS transmission with a 6.0 cooler. Has had a few HP mods just short of bigger inj. Will probably do that some day when needed . But for now it has enough HP.

@keysautorepair6038 3 года назад

Hey John this is Jerry I have a question about a converter maybe you can help me out with it

@FuquarProductions 11 месяцев назад

What model of scan tool do you have?

@fdevies Год назад

Do you happen to know my my EBP doesn’t change? on my 02 f350 7.3, my edge monitor shows it stuck at 29. Has a new sensor and tube. Have a stage 2 turbo and did the EBPV pedestal delete and placed a SPOOLOGIC Exhaust Back Pressure Valve Terminator on the pigtail.

@fdevies Год назад

Please let me know or anyone else why I have this issue.

@jjchurchwell8194 Год назад

How much was that scanner ?

@joepatenaude3957 3 года назад

I just got my first diesel today 7.3L powestroke 1997 f350

@TurboJohnRacing 3 года назад

sweet, congrats

@joepatenaude3957 3 года назад

@@TurboJohnRacing I'll post a video soon on it and mention it in one of your videos so you can check it out I already put a Godzilla 6 position chip in it lol

@josephmccormick1933 3 года назад

John are u going to 710 dragway tomorrow to get in the 28s shootout they giving away $3000 and they got someone from South Carolina motorplex to prep the track

@TurboJohnRacing 3 года назад

I'm not, I'm going to Thundervalley on Sunday to start no prep power tuning

@thesquirrelchroniclesakare7808 3 года назад

Dang !!! Do you own a pressure washer ?

@willabunnjr216 3 года назад

Thinking about getting me a Ford f250 7.3 turbo diesel

@jaydunbar7538 3 года назад

Great trucks, just beware of the weak factory valve springs. If your going to play around at higher rpms it will save you a fortune to just upgrade them ahead of time. That's the only problem I've had and I abuse the hell out of it.

@63chevyll30 3 года назад

your oil pressure sensor is JB welded

@docsmallblock6584 3 года назад

Get used to working on it!

@enigmaticnomadics Год назад

Please slow your camera work way down and back away slowly so we can see where you are in the engine better. Maybe even get a pointer and touch the parts physically. Great job otherwise. Subbed and liked!

@hankclingingsmith8707 3 года назад

NEED EGT GUAGE. TS TUNES RUN HOT .. HYDRA TUNING IS MUCH BETTER, COOLER BETTER MPG. IF YOUR TRANS HAS NO INTERNAL MODS..DP TUNER IS EVEN BETTER, ALMOST PERFECT CAN GET EPV VALVE AS EXUAST BRAKE. DP FOR TUNING IS GREAT. COST YOU ABOUT 500 BUCKS. I WENT THRU ALL THIS. BUT WORTH EVERY PENNY. IF YOU TOW MOSTLY FLAT TS OK.KEEP ON 75 FOR BEST MILAGE.

@jasonhastings5538 3 года назад

Ole tow pig gonna be makin passes before long!!!😂😂😂💪💪💪💪

@ronlott4870 3 года назад

@CaidenTalley77 3 года назад

First John

@-g-lock813 3 года назад

TURBO JOHN #SBFNASTY #LSNASTY HEY JOHN THANK YOU FOR THE SHIRT~!!! LUCKY- ( -1299-HP-) THANKS BROTHER ....................guys these shirts on the site are amazing~! grab them #WINNER