Тёмный

FORD FOCUS RS TURBO CONVERSION COMPLETE ST225 380BHP! 

Richiee's Garage
Подписаться 3,7 тыс.
Просмотров 35 тыс.
50% 1

Hello guys and gals welcome back to another video the ST RS Conversion is finally complete the rs turbo conversion has been a success and the cars running Amazingly! few things I wanna say sorry for the mic very windy right now and my mic muff got damaged so doesn't work properly no more! Also sorry for the lack of POV recording it's very hard when tryna get all this stuff done on a time schedule and some of the stuff needed a few sets of hands and so on. Now onto the Figures Yes the car ran 380BHP which for a driveway job and a pre-mapped ECU from another car is Fantastic and is more than enough power for now! The car fueling and air to fuel ratios are perfect and the map itself is a very strong and stable map so I'm not upset I didn't get the 420BHP I was hoping for because If I can now work on all the handling and suspensions upgrade and really knuckle down on tryna put the power down! that 380 should feel like 420. There's no point chasing numbers to hit the one figure you want and you car running like crap and being able to put the power down I could've hit 420 if I added this and that but it would've shot my torque up and my engine wouldn't survive and I'd have to spend more money on upgrading the internals! (I will be doing further down the line) and so on so, for now, 380BHP and 400FT LBS of Torque I'm very happy with.
HUGE THANK YOU TO SAM Always helping out with things and just being a beacon of knowledge!
Sams Social Medias!
/ @centsam5947
/ awdstsam
A&K Motorsport for the 650cc Injectors
/ aandk.motorsport
Parts needed for the conversion (Necessary parts)(Ebay part numbers)
Rs Turbo
Rs Turbo Lines:
www.ebay.co.uk...
Turbo Charger Gasket:
1590244
Oil Seal:
31251439
RS Oil Return Pipe:
1681379
Manifold Gasket:
www.ebay.co.uk...
Rs MAF
Rs Crossover
Rs Map Sensor
ST to RS Maf Extension Loom
RS Vac Pipe
RS Turbo to Crossover Pipe/Hose
RS Crossover to Filter Pipe/Hose
ECU with RS Software/Files and ABS Patch
ECU Holder
Supporting Mods
Stage 3+ Intercooler (Airtec/R-Sport/Forge)
RS Oil Cooler
Cone/Group A Filter
Uprated Engine Mounts/Bushes
🔴SPONSORS/AFFILIATES🔴
Check Out RSParts/Rob Galloway on Facebook for all your MK2 Ford Focus exterior parts.
@Autobeam USE “03ANO10” at check out when you spend £20 or more to receive 10% off your order.
Keep in touch with me!
Instagram: / 03ano
SnapChat: DeanRichiee

Опубликовано:

 

11 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 143   
@raduandreiv888
@raduandreiv888 4 года назад
Finally!This is your best video so far!
@Richieesgarage
@Richieesgarage 4 года назад
thank you appreciate it!
@masterful15
@masterful15 2 года назад
@@Richieesgarage what you pay the Focus rs turbo?
@GCMYT
@GCMYT 4 года назад
Your best video yet. Glad it’s doing super well man :)
@Richieesgarage
@Richieesgarage 4 года назад
me to man thank you for the extra push! saw LBTV got a 135i ;)
@terrysadlerfinn1979
@terrysadlerfinn1979 4 года назад
Absolute epic build been following dean for a while, love and wait for the next upload. I can always hear the car from my house 🤣 I can vouch that it’s a true animal in the sense and built not bought.......and a top lad 👍🏻 Well done mate
@Richieesgarage
@Richieesgarage 4 года назад
I’ve only just seen this apparently RU-vid stops comments appearing as notifications after a while 😂
@reeces_rs7384
@reeces_rs7384 4 года назад
Banging vid mate good power too
@Richieesgarage
@Richieesgarage 4 года назад
rs _reece means a lot pal! Thank you hope you and the family are well!
@Honky_Konky_Phooey
@Honky_Konky_Phooey 4 года назад
You can’t be disappointed from 225 to 380, miss my old EO st cracking car just so damned expensive to tune , good video lad 👍
@APRILIA250STACE
@APRILIA250STACE 4 года назад
😳 finally hands on engine stuff Now we talking
@Richieesgarage
@Richieesgarage 4 года назад
stacey godbold always hands on aha
@APRILIA250STACE
@APRILIA250STACE 4 года назад
03ANO how long you think pistons will last ?
@Richieesgarage
@Richieesgarage 4 года назад
@@APRILIA250STACE a while its only 400 torque
@AlanXR6
@AlanXR6 4 года назад
Nice work and great result on the dyno. What boost psi are you running? Have you done the block mod?
@cardude900
@cardude900 4 года назад
I dont understand why guys buy a ST 225 for 10-14 grand and put in it mods for 6-7 grand and have then the power of an RS, when you can buy an Focus RS for 20 grand witch makes for 4 grand 500HP with no problems. i dont know how it is in the UK, but here in Switzerland it does work.
@Richieesgarage
@Richieesgarage 4 года назад
m0t4rd n4ti0n I mean it cost me less than 2.5k and the car cost me 4.4k so and insurance is 1.6k a year fully modified An RS would cost me 20k 6k insurance and still be 300bhp stock then would cost me 4-5k getting it to 400bhp due to the RS PRICE TAG on every modified item, but I see where you’re coming from but in the uk it’s a bit different everyone likes being different and an RS is a lot of money
@woooster17
@woooster17 4 года назад
I miss my old EO ST.. had 2, first one bought new in 2006.. Proper spannering in the cold mate 👍🏼
@Richieesgarage
@Richieesgarage 4 года назад
waynester71 great motors may look to wrap mine as the paints just flaming off
@woooster17
@woooster17 4 года назад
03ANO They can suffer with age, especially with lacquer peel in places.. would make for good content though. Would you change the orange? I do love a bright Focus 💚🧡😄
@Richieesgarage
@Richieesgarage 4 года назад
Really liking the Matte metallic graphite grey with gloss black and orange 🍊
@woooster17
@woooster17 4 года назад
03ANO Sounds good mate, do it.. 👍🏼
@midlifefocus3298
@midlifefocus3298 4 года назад
Brilliant video, never seen anything like this for the ST. I have all the main parts for me and my mates to attempt this ourselves, this has spurred us on! I need to figure out the map bit as well as I will be going full RS sensors too. Lots of weird conflicting info out there.... Quick question, did you stick with the standard ST heat shield?
@Richieesgarage
@Richieesgarage 4 года назад
i did bud standard st heat shield
@cianwoolley9073
@cianwoolley9073 4 года назад
Yes mate this is so sick love the vids and the car 😂🙏👍🤙
@Richieesgarage
@Richieesgarage 4 года назад
thank you Bro!
@willtrollip6647
@willtrollip6647 4 года назад
That flames tho👏👏👌
@Richieesgarage
@Richieesgarage 4 года назад
😂😂 yeah
@jinage01
@jinage01 4 года назад
Engine rebuild vid coming soon ;p .... 380 nice one bud !
@Richieesgarage
@Richieesgarage 4 года назад
make for good youtube content aha
@BOOMBABY2020
@BOOMBABY2020 4 года назад
great job bud
@jpatt5825
@jpatt5825 4 года назад
You're video with you installing the plenum. How long did it take you to do. Cheers. Car looks good 😁
@Richieesgarage
@Richieesgarage 4 года назад
1-2hours maybe
@GixxerRipper
@GixxerRipper 4 года назад
Brilliant vid man nice one 👍🏻
@Richieesgarage
@Richieesgarage 4 года назад
thank you appreciate it
@isoconfused8744
@isoconfused8744 4 года назад
Thats great, didnt even know this was a thing... how much was all this? and do you have the block mod done?
@Richieesgarage
@Richieesgarage 4 года назад
Iso Confused block mod yes and yeah it’s a thing a lot of people do it’s more reliable power
@simonlowe4013
@simonlowe4013 4 года назад
Nice video pal. How much was the RS turbo and manifold? Great work.
@Richieesgarage
@Richieesgarage 4 года назад
Simon Lowe about 900£ with turbo OEM turbo lines
@dannyellis971
@dannyellis971 3 года назад
Huge help, thanks.
@1breematt
@1breematt 10 месяцев назад
That is a strange oil cooler. They should have cooling fins. Or are the fins covered by the plastic cover ? In Australia no plastic cover. Is it the salt and temps up there that the cover is for? Cheers :D
@shaunwelch9176
@shaunwelch9176 4 года назад
Banging mate just banging What u with ur old crossover???
@Richieesgarage
@Richieesgarage 4 года назад
i sold that a while ago i have the standard one spare but the airtec one i sold
@Kastenwagon
@Kastenwagon 4 года назад
Awsome work, Respekt 👍connecting rod and pistons is oem in ST ? Greetings from Germany
@thegunner1437
@thegunner1437 4 года назад
Yes brother! I have to do this
@Richieesgarage
@Richieesgarage 4 года назад
The GuNNeR sT-r6 it’s a good upgrade
@alfde-kane6086
@alfde-kane6086 4 года назад
So did you have it mapped after putting them injections in......when the car was on the dyno was it getting mapped......
@Richieesgarage
@Richieesgarage 4 года назад
Ecu was premapped bud with RS software
@stevenw5342
@stevenw5342 4 года назад
What kinda price has it cost you for all mods to reach that power? I always said I was happy with mine a stage 1 lol but now looking for a little more 🤭 your car looks awesome
@Richieesgarage
@Richieesgarage 4 года назад
thank you and i dont actually know ill price it all up and get back to you! Some parts are brand new some are used!
@isoconfused8744
@isoconfused8744 4 года назад
@@Richieesgarage would also like to have a ball park, want to know what route is best hybrid turbo etc?
@liambowers5067
@liambowers5067 4 года назад
03ANO hiya mate just wanting to know where u got all the braided pipe kit from for the turbo change over ??
@Richieesgarage
@Richieesgarage 4 года назад
273492559098 is the item number for mamba kit
@Madogen
@Madogen 4 года назад
Heh, never knew these guys were around the corner. Will have to do one of these £40 power run Saturdays after this whole Corvid-19 thing is over with.
@Richieesgarage
@Richieesgarage 4 года назад
Madogen the guy that runs it owns syvecs so I don’t take my car anywhere else for dynos
@Madogen
@Madogen 4 года назад
@@Richieesgarage oh nice. What a gem to have on the doorstep!
@liambowers5067
@liambowers5067 4 года назад
Anyone got any ideas as to where I can get the braided hose kit for the turbo in this video ?
@Richieesgarage
@Richieesgarage 4 года назад
liam bowers eBay item number is 273492559098
@JoshuaLBatterson
@JoshuaLBatterson 4 года назад
Hey dude! I’m planning on doing mine sooner or later into the build with my 2007 ST225 or in Australia we call them the XR5 Turbo. Anyways was it hard to do the swap at all?
@glynnmason8205
@glynnmason8205 4 года назад
great video so this is with an focus rs turbo and all the other thing's in your list and no block mod
@Richieesgarage
@Richieesgarage 4 года назад
glynn mason it has block mod mate very first mod I got done
@glynnmason8205
@glynnmason8205 4 года назад
@@Richieesgarage what is the block mod does it require engine out cylinder head off
@phillsolway8511
@phillsolway8511 4 года назад
Sick vid bro. Did you use the rs fuel pump? Or did the standard st make the 380 bhp?
@Richieesgarage
@Richieesgarage 4 года назад
phill solway on standard fuel pump the cars not custom mapped so I reckon it had a bit more in it maybe but it will be getting custom mapped soon
@phillsolway8511
@phillsolway8511 4 года назад
Thanks for replying!! I’m going in for a custom remap on Monday hoping for 360bhp+ with these mods was not sure about the pump..... Airtec plenum Airtec crossover Ram air filter Airtec stage 3 intercooler Rs plugs Rs clutch and flywheel Rs vac-pipe Hybrid 360bhp turbo Turbo smart re-circ Turbo smart actuator 3 inch turbo back Block mod 550cc injectors Great vids aswell mate. I have used them a few times for help.
@Richieesgarage
@Richieesgarage 4 года назад
phill solway appreciate that and I see why you can’t hit 360 running that setup goodluck let us know how you get on
@fanidamane8687
@fanidamane8687 4 года назад
hi very nice work, I would like to know your rear diffuser you buy it or?
@Richieesgarage
@Richieesgarage 4 года назад
It’s from rspstores.com bud
@brandonkhan3790
@brandonkhan3790 4 месяца назад
Sorry to comment on old video pal but how did you find actually removing turbo from engine bay?? Doing mine atm but doesnt seem much wiggle room.
@Richieesgarage
@Richieesgarage 4 месяца назад
take off bottom, gearbox/engine mounted from subframe and you'll have more wiggle room
@mikepb123
@mikepb123 4 года назад
Hi mate, followed your video for a while and you have helped me out with some install tips. With this install, did you remap it again for the new injectors and turbo. Also would u think it would be ok without the RS oil cooler or is it 100% needed. Mine is getting this work in a couple of weeks.
@Richieesgarage
@Richieesgarage 4 года назад
dont need rs oil cooler it just helps, and yeah you need it remapped and u need rs ecu software and rs abs patch or the abs module itself! otherwise car will run really rough multiple lights as you have the rs map and maf senors and so on
@mikepb123
@mikepb123 4 года назад
@@Richieesgarage its remapped now at stage 2 the company I use will install everything and custom map it like that have with my current map, u dont have ur engine forged do u? Do u think its needed if I want to stay at 400/400 . I am block modded already
@mikepb123
@mikepb123 4 года назад
@@Richieesgarage also you in any of the focus groups on fb like lancs ford owners or ford focus st owners uk
@Richieesgarage
@Richieesgarage 4 года назад
If you keep the torque at 400 or less you should be okay, but I guarantee my car is really healthy my old st turbo was mint aswell, and yeah I’m on many of the pages pal constantly posting
@mikepb123
@mikepb123 4 года назад
@@Richieesgarage my st turbo is on it's way out but it's a used one before I bought it so upgraded to RS. Hopefully I see u post on the groups.
@stephenstyles4938
@stephenstyles4938 3 года назад
Love it 🙂😍🤩
@Richieesgarage
@Richieesgarage 3 года назад
Thank you
@glynnmason8205
@glynnmason8205 2 года назад
i was considering doing rs ecu and turbo swap but i read it say's abs patch whats that ?
@stadam7814
@stadam7814 4 года назад
Yes lad I need to do this so bad haha
@Richieesgarage
@Richieesgarage 4 года назад
its a good upgrade!
@stadam7814
@stadam7814 4 года назад
@@Richieesgarage can believe it is mate just waiting on getting my back from garage some how snapped my manifold bolts 🙈
@Richieesgarage
@Richieesgarage 4 года назад
How on earth you do that
@matst3954
@matst3954 4 года назад
Good vid m8,I've done this conversion to my st....running revo 4+ 415bhp 440lbft....when u blanked off the record what did u do with the hose that attaches to it? Blank it off? Also regards the actuator the standard one is the best one to use...
@Richieesgarage
@Richieesgarage 4 года назад
I put a bolt/screw inside the recirc pipe and cable tied it shut for now till I sort something and I think an aftermarket one will be better aslong as it’s adjusted correctly and remapped in as boost and torque will be higher
@andybrace4983
@andybrace4983 Год назад
Lovely old job
@nomoremrnoneturbo2106
@nomoremrnoneturbo2106 4 года назад
have you had mod block done to it ?
@richardts8858
@richardts8858 4 года назад
Did you just swop out ecu?what about key programming?did it just start up without?
@Richieesgarage
@Richieesgarage 4 года назад
swapped over but had to pay someone to move my security codes and so on over so it would work with my car!
@thegunner1437
@thegunner1437 4 года назад
I’d love to drive with u side by side!! I have the black st facelift and a complete orange engine.. not race u would smash mine but would be good to drive with u.
@Richieesgarage
@Richieesgarage 4 года назад
The GuNNeR sT-r6 go for it aha
@coletheginge
@coletheginge 4 года назад
I THOUGHT IT WAS LEE LOCKWOOD
@Richieesgarage
@Richieesgarage 4 года назад
ColeTheGinge 😂😂 funniest comment so far
@stephenstyles4938
@stephenstyles4938 4 года назад
What kind kind of turbosmart circ valve will I need for my st focus
@Richieesgarage
@Richieesgarage 4 года назад
Depends on a few factors but heard the Kompact shortie is good
@garymugford3273
@garymugford3273 4 года назад
You had block mod or any forge work done???
@Richieesgarage
@Richieesgarage 4 года назад
just block mod pal
@Max-io3he
@Max-io3he 2 года назад
Nice video, how much does cost to complete the conversion?
@Richieesgarage
@Richieesgarage 2 года назад
for an ordinary person, say 2k max ?
@kurdt5
@kurdt5 4 года назад
What parts did you change? do you have a list
@Richieesgarage
@Richieesgarage 4 года назад
Kai check description bud
@kurdt5
@kurdt5 4 года назад
@@Richieesgarage Lol didnt see that list just sat watching the video....awesome channel learning loads for my ST
@Richieesgarage
@Richieesgarage 4 года назад
Kai no worries pal and thank you I try to help as much as I can
@trackst7029
@trackst7029 4 года назад
Do you not need to change pistons and rods ?
@Richieesgarage
@Richieesgarage 4 года назад
Craig Lawrence nah my torque is capped at 400 bud
@marvinroth263
@marvinroth263 3 года назад
what is this maba thing for?
@garymugford3273
@garymugford3273 4 года назад
Strutt braces for next vid???
@Richieesgarage
@Richieesgarage 4 года назад
if i can find a set i can afford aha saving up a bit now
@djCarterboi25
@djCarterboi25 Год назад
Hi mate how hard is it to take the turbo off for a beginner on one these car
@Richieesgarage
@Richieesgarage Год назад
i would say medium difficulty its honestly just time consuming and a bit tight to move about in
@kimmikko1
@kimmikko1 4 года назад
I fucking need a focus st inn my lifexD
@jpatt5825
@jpatt5825 3 года назад
You wont be disappointed
@tristanl9421
@tristanl9421 4 года назад
Hello! You just perform a bloc mod, you didn't forge?
@Richieesgarage
@Richieesgarage 4 года назад
Tristan L no forging internals should be fine torque is capped at 400 bud
@tristanl9421
@tristanl9421 4 года назад
@@Richieesgarage Okay, I understand better just have to limit the torque for the gearbox. How much did the preparation cost you?
@TheBoogie0189
@TheBoogie0189 4 года назад
Bro 👊🏼💥 What power did u make with these engine mods. ............................ Rs plugs. Airtec crossover. Ram air induction kit. Airtec intercooler. 3” downpipe. 3” cat. 3” catback.
@Richieesgarage
@Richieesgarage 4 года назад
I dont know this is my first remap lol but you could probs make around the 300 mark with your supporting mods ?
@TheBoogie0189
@TheBoogie0189 4 года назад
I fort bevo put a map on urs a while ago bro.
@Richieesgarage
@Richieesgarage 4 года назад
Nope you might be thinking of LBTV or GCM the PT
@TheBoogie0189
@TheBoogie0189 4 года назад
03ANO ohhh yeah mite be him im thinking of, so this is ur first dyno.
@TheBoogie0189
@TheBoogie0189 4 года назад
Also are u running standard crossover now instead of the Airtec crossover
@jasonhobbs5611
@jasonhobbs5611 3 года назад
What size injectors did you just fit in this mate did you say 660's
@Richieesgarage
@Richieesgarage 3 года назад
650cc fella
@jasonhobbs5611
@jasonhobbs5611 3 года назад
@@Richieesgarage I was told that I would need to fit a k16 or K24 hybrid turbo to map the 550's in so I have put standard injectors in and running modx map as I was told it would be over fueling and running rich
@jasonhobbs5611
@jasonhobbs5611 3 года назад
I'm still on stock ST turbo but I have everything else 3"turbo back with decat ramair intake and ecu holder, airtec intercooler and crossover pipe and a plenum. Oh and uprated fuel pump on modx map
@antwayne7586
@antwayne7586 4 года назад
You’re looking like Lee Lockwood
@Richieesgarage
@Richieesgarage 4 года назад
😂😂
@mrx1702
@mrx1702 4 года назад
You’re cam belt isn’t the best looking
@Richieesgarage
@Richieesgarage 4 года назад
Willie Wonka was replaced in March and block mod at the same time so it’s fine
@GripEnemy.
@GripEnemy. 4 года назад
What exhaust system is this running?
@Richieesgarage
@Richieesgarage 4 года назад
GripEnemy I think at the time maybe section 59 or kms section 18 I honestly forget so much been through so many
@GripEnemy.
@GripEnemy. 4 года назад
@@Richieesgarage whats your preference, ive got a dreamscience system but want something that really unleashes that 5 pot noise without being overly loud and boomy
@DooDicky
@DooDicky 3 года назад
How long did this take overall?
@Richieesgarage
@Richieesgarage 3 года назад
8 hours maybe
@DooDicky
@DooDicky 3 года назад
Thats pretty long! Internet says 3 hours.. but maybe because you didnt have lift
@simonlloyd7557
@simonlloyd7557 4 года назад
the car is the same colour as his hair
@Richieesgarage
@Richieesgarage 4 года назад
simon lloyd I did not know this
@thatohato3443
@thatohato3443 2 года назад
,0
@Richieesgarage
@Richieesgarage 2 года назад
still think this is my best video to date
Далее
How to make 500 Horsepower in your Focus ST
11:12
Просмотров 14 тыс.
Focus RS Turbo Conversion // Dave Mac
6:01
Просмотров 12 тыс.
MK2 FOCUS ST GETS A PLENUM | AIRTEC INLET PLENUM
13:38
Ford's New Car Scares the Crap Out of Me
10:16
Просмотров 338 тыс.
Ford Focus ST225 - Build Part 4
29:50
Просмотров 1,3 тыс.
CATLESS DOWNPIPE INSTALL FORD FOCUS RS
14:45
Просмотров 112 тыс.
FIXING THE UK'S WORST FORD FOCUS ST
14:02
Просмотров 4,3 тыс.