Today, I finish installing the fuel system I designed for the Lightning, go over how I routed the Fragola 8000 series push-loc hose, where I mounted the Fore Innovations fuel pressure regulator, and finish everything up! I came up with and pieced together everything on my own, including all the hose/an fittings, Fore Innovations regulator, triple pump hat, fuel filter, Metco Motorsports fuel rails, and everything else that was needed to complete the fuel system! Stay tuned, plenty more to come!
Fuel System Part 1 -
👉 • Ford Lightning Getting...
GT500 2.3 Trinity TVS swap videos you may have missed! Stay up to date and follow the NEW build!
👉 • Ford SVT Lightning - G...
Buy a Billet Lower Grille Delete for your Lightning! Hit me up on Instagram or Facebook to grab one, and support the channel!
Grille Delete Info -
👉 • Ford SVT Lightning Bil...
Make sure to follow my builds on ALL social media too!
Instagram -
👉 / debtlife.projects
Facebook -
👉 / debtlife.projects
( Or search for "Debtlife.projects" )
Check out JC Customs CNC Machining for all your custom billet part needs!⚡ -
Make sure you use code "DEBTLIFE" for 10% off! 🤑
Website : www.jccustomscnc.com/
Instagram : / jccustomscnc
Facebook : / jccustomscnc
RU-vid : / @jccustomscnc
** DETAILED Fuel System Layout, with part numbers! **
Male 8-an Orb Style fittings for the rails (4) and fuel filter (2)
Lets start with the feed. 1 45 degree female hose end will connect to the fuel hat, running to 1 straight female hose end that will connect to the filter. Then, 1 45 degree female hose end from filter, to 1 straight female hose end to connect to a billet Y fitting. One end of the Y fitting will be connected directly to the back of the drivers side rail with a 90 degree female-female fitting, and 1 45 degree female hose end will connect to the other side of the y block. Run a hose from that 45 on the Y block, over to the passenger's side rail, with a 90 degree female hose end, with one straight vibrant performance extension into the back of the rail. Coming out of the front of the rails will be two hoses, so 2 180 degree female hose ends go on the front of the rails, one line with 1 straight female hose end, and one with 1 180 degree female hose end, to attach to the feeds on the regulator. That should take care of feed, and the hardest part!
For the return, 1 90 degree female hose end from regulator, with 1 straight female hose end that connects to the fuel hat.
So in total, this is the master parts list, with part numbers -
7 (or 4) - male orb fittings for rail ends and regulator - 495103BL (may not need 3 for regulator, check to ensure regulator comes fitted with orb fittings, if so, you only need 4 )
2 - male orb fittings for fuel filter - 495104BL
5 - straight female hose ends - 200108BL
2 - 90 degree female hose ends - 209008BL
1 - 90 degree female-female fitting - 496318BL
3 - 180 degree female hose ends - 218008BL
3 - 45 degree female hose ends - 204508BL
1 - Billet Y fitting - 900608BL
1 - Vibrant Performance Union Fittings - 10587
-30ft of -8an 8000 series push loc hose (2 rolls)
-Metco fuel rails
-Fore regulator
-Fore fuel hat
-Fore filter/filter housing and extra filter
20 - Hose clamps / 1 clamp tool
-Hose cutters
-8-an wrench if desired
Make sure you follow all the builds by Subscribing to the channel! Plenty of drag / street racing, race truck build stuff, budget project car vlogs, and automotive how to / channel content!
#fordlightning #fuelsystem #racetruck
25 янв 2023
