Ford Mondeo mk4 OIL CHANGE and SERVICE INTERVAL RESET (2010, 2.2 TDCi)

Подписаться 1,6 тыс.

Просмотров 47 тыс.

50% 1

Just a short guide showing how to change the oil on your Ford Mondeo mk4, TDCi engine. It´s a pretty easy and strait forward job. All the tool sizes in the video.
Mainly:
- 10 mm socket - splash shield
- 21 mm socket - sump plug
- 27 mm socket - oil filter
This guide works for me. But I´m not a professional, so no guarantee here...
If you have any questions or constructive coments, let me know. Take care.

Авто/Мото

Опубликовано:

26 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 38

@steveskelton4260 2 года назад

Awesome video.. Did mine today following along with your video. Thank you so much.

@DIYProjectX 2 года назад

Thank you sir for your feedback. You made my day.

@swedejonas79 15 дней назад

Great content. I followed your steps and managed to get it done. Thank you!

@DIYProjectX 14 дней назад

Well done and thank you.

@RantDuJour 5 лет назад

Thank you for putting this up, so much clearer to understand the change and location of the oilfilter then trying to read up on it!

@DIYProjectX 5 лет назад

Thanks a lot. I'm glad it helped.

@MrTyakra 5 лет назад

Thanks for good oil change instructions. Unfortunately, there are only a few videos about the 2.2 TDCI engine.

@DIYProjectX 5 лет назад

Thanks man.

@kerlinjk5115 4 года назад

You made getting that oil filter out and back so easy, it took ages to get back in and tight enough not to leak lol

@DIYProjectX 4 года назад

Yea, the location of the filter sucks... Hope you managed...

@kerlinjk5115 4 года назад

@@DIYProjectX Yeh cheers managed to get it done in the end. Kept feeling it was tight enough but when I ran the car it would start leaking I was shocked how tight I had to screw it on thought I was going to break it.

@DIYProjectX 4 года назад

@@kerlinjk5115 Wow, I didn't have to tighten it so much. Did you replaced the rubber o-ring? Well, as long as it doesn't leak...

@kerlinjk5115 4 года назад

@@DIYProjectX Yeh I put the new one on maybe there is something wrong with the housing time will tell lol

@bikesharebags5192 3 года назад

Very useful. Did the oil change but am about to tackle the filter. I see the hex nut on the filter housing has a sort of catch thing on it (hard to see it properly.... any guesses as to what it is?

@DIYProjectX 3 года назад

I can only guess it is there to stick to a socket when you unscrewed the housing and trying to pull it all up. But you don't need to worry about it.

@mikeberty8599 2 года назад

Just done my mk4.5....... Totally different haha

@DIYProjectX Год назад

I wonder why manufactures do that. Like three different braking systems on one model of car.

@RantDuJour 5 лет назад

If you are due for an fuel filter replacement please film it to, along worth any other maintenence of course ;)

@DIYProjectX 5 лет назад

Will do.

@AwesomeCorgi 5 лет назад

What is the torq-spec for the sump bolt?

@DIYProjectX 5 лет назад

I think it´s 25Nm. I do 30.

@adriandoyles7460 5 лет назад

WTF CROCS AND SOCKS TOP FASHION STATEMENT

@DIYProjectX 5 лет назад

Cheers mate. What do you wear at home, when you work on your car? Tuxedo? 😀

@karoladzkarol Год назад

Bro what about 1.6 tdci is all the same?

@DIYProjectX Год назад

Probably very similar. The filter location may be different, otherwise not much else in it.

@karoladzkarol Год назад

@@DIYProjectX thanks mate

@szelestimur8315 3 месяца назад

Today i bought this car. I made an oil change like you. I filled 5.5 liter engine oil and started the car. After checked the oil level and it was very high. i drained 0.5 liter but is still high. I dont understand it.

@DIYProjectX 3 месяца назад

Do you know how much of the old oil came out? It looks like there was some old oil left in the car. Are you measuring on level surface?

@szelestimur8315 3 месяца назад

@@DIYProjectX no i did not measured how much came out. The engine and the oil.was warm and i waited almost half an hour to came out. The oil dipstick seems original. Interesting that in citroen c5 with the same engine needs only 5 literes.

@DIYProjectX 3 месяца назад

@@szelestimur8315 Strange. Check the oil with the car sitting level (not on ramps). Checking the dip stick itself was my next suggestion.

@filiplovasz152 Месяц назад

Owning this car for 100k kilometers and every oil change I use about 4,5 litres.

@czyzyk1284 Год назад

A filtr paliwa co ile ?

@DIYProjectX Год назад

Done the fuel filter recently. A bloody nightmare to make the car start after the change...

@czyzyk1284 Год назад

@@DIYProjectX trzeba zalać filtr paliwem do pełna aż się wylewa. Ostatnio znalazłem nie dół pełna i się zapowietrzył i był problem z odpaleniem

@DIYProjectX Год назад

@@czyzyk1284 yes, I know. It worked this way on other cars. But here, I had to loosen the rail nuts going to the injectors and suck out the fuel using pump. Normally, the system is primed using a diagnostic tool, which I don't have.