Ford Transit glow plug replacement 2.2 TDCI

Подписаться 57 тыс.

Просмотров 50 тыс.

50% 1

Step by step guide on how to replace the glow plugs on a 2012 MK7 Ford transit 2.2 TDCI, Same procedure for replacing the glow plugs on a MK8 Ford transit custom 2.2.
The engine ecu may store glow plugs faults to indicate a fault.. P0671 / P0672 / P0673 & P0674
New Glow plugs Ebay - ebay.us/BSenvw
New Glow plugs Amazon - amzn.to/3WHRDdA
Diagnostic machine used in this video:
Topdon Phoenix lite 2 - diydaly.co.uk/products/phoeni...
Tools used :
Milwaukee 3/8 Battery ratchet - ebay.us/BZZqQG
Multimeter - ebay.us/xV4hKW
Draper socket set - amzn.to/2FdUEjf
7mm Hose clip tool - ebay.us/aT3dix
WD40 - amzn.to/3oiaIRE
Irwin Mole grips - ebay.us/m5JjNf
Chisel & punch set - ebay.us/mfIeY1
Digital torque wrench 3/8 - amzn.to/2PP9vpP
Manual torque wrench 3/8 - amzn.to/33eZsxj
Trim clip tool - amzn.to/3pcUl9N
Prybar set - ebay.us/LNtJ1M
Hammer - amzn.to/2PAoD9V
Long Torx socket set - ebay.us/VKEkZZ
Torx socket set - ebay.us/SPp8YB
Long reach 3/8 ratchet - amzn.to/3iJsADg
Check Euro car parts - tidd.ly/3lIO7xA (use discount codes on site)
Check GSF Car parts - tidd.ly/34pZe7o (use discount codes on site)
Torque settings :
Glow plugs = 13NM
Inlet manifold bolts = 25NM
Any Donations to help Support my Channel are much appreciated.
Donate via Paypal - paypal.me/diydaly
Useful links:
Car Analytics - Vehicle information checker - tidd.ly/3B2PEbx
If you found this video useful, please Like Share and Subscribe to help grow the channel, and never miss any future content. ru-vid.com?...
Please also check out my website - www.diydaly.co.uk where you'll find top quality goods, tried, tested and recommended by actual mechanics.
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. This doesn't effect the price you pay!

Авто/Мото

Опубликовано:

31 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 55

@diydaly Год назад

New Glow plugs Ebay - ebay.us/BSenvw New Glow plugs Amazon - amzn.to/3WHRDdA Diagnostic machine used in this video: Topdon Phoenix lite 2 Ebay - ebay.us/tsyiTI Topdon Phoenix lite 2 Amazon - www.amazon.com/dp/B0B1MB6YG8 Tools used : Milwaukee 3/8 Battery ratchet - ebay.us/BZZqQG Multimeter - Multi meter - ebay.us/fvsMub Draper socket set - amzn.to/2FdUEjf 7mm Hose clip tool - ebay.us/aT3dix WD40 - amzn.to/3oiaIRE Irwin Mole grips - ebay.us/m5JjNf Chisel & punch set - ebay.us/mfIeY1 Digital torque wrench 3/8 - amzn.to/2PP9vpP Manual torque wrench 3/8 - amzn.to/33eZsxj Trim clip tool - amzn.to/3pcUl9N Prybar set - ebay.us/LNtJ1M Hammer - amzn.to/2PAoD9V Long Torx socket set - ebay.us/VKEkZZ Torx socket set - ebay.us/SPp8YB Long reach 3/8 ratchet - amzn.to/3iJsADg

@WilliamBeattie-oj5sn 8 месяцев назад

Well done Mr Daley..great video and commentry..best out there by a mile..keep up the good work👍

@diydaly 8 месяцев назад

Thanks, will do! 👍🤣

@kenlarman4252 Год назад

Will be doing this myself on a 2.2 Custom “as you mentioned is the same engine” was advised to get it up to temp to beforehand to aid in loosening them, have also heard good reviews about Inject crack spray from euro carparts so will be giving them a good soaking on & off the day before, I do have time on my hands so can take time which is a different story for most who can’t have their van off the road for to long. Thanks for that video it’s given me a heads up so will be able to dismantle things quicker without having to think to much 👍👍

@diydaly Год назад

glad to help, yeah definitely helps getting it hot first and well worth trying some sprays 👍

@neilhampson2843 Год назад

Getting into the engine bay is your first challenge on the more modern Transits. What a crazy idea of using your ignition key to open the bonnet. I have a Mercedes E class 320cdi, and getting the glow plugs out of that is a scary job. The last plug I replaced, I ran the engine upto temperature and used my battery impact on its lowest setting,and that worked. The glow plugs look very similar to the ones in the transit. I also did all four plugs on my Mini cooper D with the BMW engine.They were also frightening to get out. I did test them with a battery as you did, the problem being they are only 4 volts, so the only working plug I had popped with 12V on it.

@diydaly Год назад

I know! you'd think they might have changed it for the customs after having so many problems previously ha .. yeah we have a little impact gun for glow plugs & it seems to work fairly well tbf 👍 .. I was temped to go that bit further to get it out but kept panicking about having an issue when the van needed to go back on the road the next day ha. ive had a few troubles with them on the mini before 😖, the worst ones we seem to suffer with are the vauxhall 1.3 cdti, they are piss thin! 😬

@neilhampson2843 Год назад

@@diydaly And hear I was thinking the Mercedes glow plugs were the thinnest of them all. They have the tensile strength of a carrot.🤣😂🤣

@diydaly Год назад

@@neilhampson2843 😂😂🤣

@danyo1972 Год назад

Great video as usual. Thanks.

@diydaly Год назад

Thanks for watching! 😃

@AYICIK12 6 месяцев назад

Thanks for the video, helped me to change them in my peugeot boxer. Luckily all off them came out easy.

@diydaly 5 месяцев назад

Glad it helped 👍👍

@boxerdogsam Месяц назад

Absolutely brilliant mate,fantastic mechanic thankyou,👌👌

@diydaly Месяц назад

Thanks 👍

@TheDervMan Год назад

Wow that was quite a faff. Love how the TopDon has pride of place in the drivers seat 😎🤣🔧😊

@diydaly Год назад

haha only the best for topdon!

@MMAmotor Год назад

Thank's for the video,i have this problem in my Ford✌️✌️✌️

@diydaly Год назад

Glad it helped 👍👍

@croco33cristian70 Год назад

Short story,you can get a spanner to the screw beyond egr,on the manifold

@xowaspxowasp5772 6 месяцев назад

Extraction of the glow plugs is recommended on a hot engine. They'll loosen so much easier 👍

@diydaly 6 месяцев назад

👍

@lovepreetsinghhanjra1997 Год назад

Nic work sir

@diydaly Год назад

👍👍👍

@roy2689 Год назад

This engine is fitted in the later 2.2 defenders, i've changed glow plugs in one of these and to be honest it was a bit of a nightmare. The engine is fitted length ways and theres a bunch of coolant hoses in the way, access to the EGR valve is dreadful, why on earth did they design them with glow plugs under the inlet manifold??

@diydaly Год назад

Haha I know what a pain! I’ve got to fit a egr cooler on a ranger soon , the 5cylinder version of this engine same , sideways on and cooler runs across the back 😖

@castrolgtx5064 Год назад

Great video thanks for sharing buddy.. eBay or Amazon won’t post the TopDon to Ireland 🇮🇪

@diydaly Год назад

Thanks mate! arr gutting! thats odd can't see why that would be an issue

@castrolgtx5064 Год назад

@@diydaly What can you do 🤷‍♂️ But Thank you for the reply back

@ariantaria2065 Год назад

Not an easy access, quite a lot of work for this job..in some cases labour cost is more than the parts. Good video thanks for sharing your knowledge 👍

@diydaly Год назад

Thanks , glad you liked it 👍

@tonymccarthy9273 Год назад

Hi mate , what would have to be done if the glow plug dig break on removal, and how would you take out the remainder, not to put a damper on things, what if the glow plug thread went wrong, as I had this with a sparkplug, I had to remove the cylinder head and get a helicoil done ,

@diydaly Год назад

Yes its not ideal! lol , I really didnt want to risk any issues on the night as the van needed to be back on the road.. there's a few tactics id of tried to get it out first but if I did snap I have a laser kit for drilling , repairing & retapping the head..Its a good kit but still can be very tricky to do in suitu.. worst case the cylinder head would need to come off to do it

@sliderdriver1 11 месяцев назад

Ive had the tip of a plug break off while fighting to get one out! Obviously couldnt tell until it appeared in my hand 😠. Of course it then needed the head off so did that before removing the other 3(which came out, no issues)🤷🏼‍♂️...typical! Id recommend warming the engine up and soaking the plug with plusgas or similar for an hour or so.

@dreiauge4553 9 месяцев назад

Due to the lack of infos for the Transits in Germany, your channel is very helpful. I changed my glowplugs on the same engine. Also cylindre 1 was very tight, but I managed to unloose ist (took a day ;-)). The result at the end: No fault in ECU, all glowplugs with the same resistance, but in coldstart under 15 C the engine is limping for several seconds. The same way as it does before! What can be the reason?

@diydaly 8 месяцев назад

Have you checked the supply to the plugs is ok? Also injectors can give starting issues in these

@ianflattley 8 месяцев назад

Would you change these if your having trouble from cole start, even if jf there's no fault codes?

@diydaly 8 месяцев назад

Tbh when there dead they always throw up a fault so probly not

@ianflattley 8 месяцев назад

@@diydaly would anything else be worth checking for cold start issue's on this engine?

@depmodeno Год назад

So if one of the glow plugs won't undo, leave it yes? Ford Mondeo 2.2 tdci cheers!

@diydaly Год назад

Yeah I would , not worth snapping one.. it'll be a right pain 😖

@douglasvick9703 Год назад

@@diydaly but .if it is a dodgy injector.will it bring on the warning light?????44 T9onnes of Thanks...Douglas Vick.Cheltenham.

@techniciansinc6048 7 месяцев назад

I see noticed the glow plugs have 4.4V written on them. Wouldn't a 12V test voltage damage them? I ask this because i got 2.2V on all 4 glow plug connectors. Also, how long should the glow plug timer run for?

@diydaly 7 месяцев назад

You do need to be careful with some glow plugs as they are not all 12v ; best to use a multi meter really

@techniciansinc6048 6 месяцев назад

@@diydaly I got true. I didn't connect batteries direct to test plugs. I tested with ignition. I got 2.2V on all glow plugs tho

@diydaly 6 месяцев назад

@@techniciansinc6048 what model vehicle is this on? If it is a transit that’s not enough, they do suffer with the loom piece that goes to the plugs

@techniciansinc6048 6 месяцев назад

@@diydaly 2017 Mazda BT50