Foundation Drill Rig Modifications.

Подписаться 142 тыс.

Просмотров 110 тыс.

50% 1

Hey guys, If you have seen some of my previous videos from the past you will notice I do a lot of work on Drill rigs and excavator booms. While they may all seem like the same type of work, they all present different challenges. Hang around and see what we're up to, and see my helper get his first taste of Arc Gouging. Thank you for the support in advance and I appreciate your comments. I try and read each and every one of them. So kick back on your lunchbreak or on the sofa and kill a little time with me. Thanks again.

Развлечения

Опубликовано:

24 ноя 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 372

@clutchSA 3 месяца назад

I was a young teenager when my dad recruited me to be his helper working on engine swaps back in the 60s after work in Chicago winters in our hime garage with no heat. We would work sometimes until midnight on big caddys and Oldsmobiles. It's not a fun job, but now i thank him, and i dearly miss him now that he's gone.. I would gladly do it all over again.

@gordjohnson70 3 месяца назад

I wish I had a son to teach. Now I'm retired. I bought a welder and am teaching my friend, who always wanted to learn how to weld. We both enjoy it. Our biggest problem is finding old steel to practice with.

@hgbugalou Год назад

I have said it before, but I love seeing your son learning a trade. Tradesmen are going to be the doctors and lawyers pay wise in another decade or two. People that work with their hands is a dying profession all around, but still critical to society. Young people would be wise to learn a trade and your son has a head start with a great teacher.

@TodLewin Год назад

Couldn’t agree more. Everyone wants to be the guy in charge because that’s somehow higher up the rung. Sadly they fail to appreciate that like anything this requires a skill set. All those that take the time to have a skill set no matter what they do, and are good at what they do will always be I demand and be paid well for it. Hats off to all those like the ic weld guys who work at their skills and are great. Also love the videos. I watch and learn closely.

@pootthatbak2578 Год назад

Learning a trade, good..go to company..work for man. Learning business craft, great..run your own life. I know its harder. The kid must learn to read if a customer will pay or is a dirtbag, or a nuisance. The kid will learn there is no back up, nobody else will help you.

@BucketList22 Год назад

@@pootthatbak2578 You don't have to be self employed to use a "trade" to make a great living. There are tens of thousands of welders, plumbers, electricians, carpenters etc etc proving that every day. But if you want to work for yourself you certainly have that as an option.

@pootthatbak2578 Год назад

@@BucketList22 right..im not getting thru correctly..i should have just said the kid will also learn how to deal with customers and run a sucessful business..a bonus, in my opinion

@pinwizz69 Год назад

Especially with the new infrastructure bill kicking in construction companies are going to be protidine well paying jobs to younger tradesmen who are replacing those who are retiring or who died during the pandemic.

@brentwoodburn8930 8 месяцев назад

I am retired now and I love watching a true master at work and I am sure your son is learning from the best God Bless

@Stefan_Kawalec Год назад

You have the most polite way of naming all kinds of stupidity and FUBARs by simply saying: "It is what it is". In every episode you produce like 3-5 merch slogans. As for the job itself - done more than right. And your work ethic is exemplary.

@raulrubio2862 Год назад

Lmao merch slogans lol that shit was funny asf 😂

@cojones8518 Год назад

32:30 There's a reason the saying "Grinder and paint makes me the welder I ain't." has been around since welding was invented. 😀 Hi Jeff the Driller.

@somerandomguy3868 Год назад

People don't realize the skill and finesse this type of welding requires, and I'm not an expert but know enough to know it's harder than it looks

@robertmcbee4671 Год назад

Always wonderful to see your student (son) at work and being shown how to do things. What an immense amount of info you have to pass onto him in the next few years. Thank you for including him, thank you for including us! Keep up the vid's as we really enjoy them. Oh yah.. bring extra batteries for the camera!!!

@Tinman-dm4cx Год назад

I have always taken pride in teaching my apprentices and my reward was them asking our boss to work with me...Just saying you're a great teacher

@markfryer9880 Год назад

A good solid tradesman who knows his stuff and is willing to share it, to teach the next generation of tradies is vital. Many tradespeople are not comfortable with passing on their knowledge for a variety of reasons, so it is vital that an apprentice is looked after by a tradesman who enjoys sharing the knowledge and skills required.

@Frank-Thoresen Год назад

I have been there and done it as a metal worker apprentice building off-shore platforms in Norway. Great memories. Worked on building the Troll-A gas platform in early 90's.

@mshort7087 Год назад

As a 27 year electrician, it’s a good feeling when the apprentices squabble to get to work with me. One of the best feelings is when my former helpers test and break out into journeymen. I do my best to bring them back home alive everyday and to teach them as much as I can. The absolute best is when they shake my hand years later and thank me for helping them advance in their career. Thanks for taking us along, Isaac. Bless you and your family, Sir

@jimmytreadway3195 Год назад

young man has skills,wont be long until he needs a truck of his own ,

@DaveWildey 18 дней назад

I love you Isaac...you're good and i like your chuckles.

@waynepollard6879 Год назад

Man ! That fits like socks on a rooster 😄

@jraltwies Год назад

Nice job, Big Daddy Issac

@rekitter Год назад

Tell Issac what you need and take the rest of the day off. When you return, the repair will exceed your expectations and then some. Issac and his son do first class repair work!

@kaiolsen3841 Год назад

I believe it’s every fathers wish to share his passion with his son great to see😊

@bombardier3qtrlbpsi Год назад

Big Daddy Isaac. I laughed. That look 😄😄 . Nice job. If there was a two 👍' s button I'd press it.

@Mobileweldingsolutions760 Год назад

I'm 38, been a welder for 17 years and I would've given anything to work alongside my Dad when I was young. What a lucky kid

@charlietanner6211 Год назад

you,re son has excellent teacher put him in the fire only way to learn

@RainManFights Год назад

Oh man that over the shoulder shot was great. We could watch the separation line develop behind your gouging. Have a great day.

@greatitbroke 7 месяцев назад

Tell your son with the carbon arc gouge one of the things to keep out of the base metal is to feed it into the weld your removing along the weld line not down into the metal. Its tricky because you have to feed it into 2 directions at once. He needs to practice on some scrap tell him to carve out the center without blowing through the plate. Thats is how I got onto it real quick.

@imtheeastgermanguy5431 Год назад

It's great to see that your son is learning. I do like this when people show others skills at the same "level" and not from above looking down on others👌😎👍👍

@JanMuell42 Год назад

The instalation part starting at 21:40: now that's what I would call a "press fit" lol

@loosenut1034 Год назад

I think it’s fantastic that you are teaching your son the trade, also I’m happy to see your son is interested in learning the trade. You do fantastic work and I enjoy seeing someone that’s not afraid to criticize their own work. Great job and I love the content. 👍🇺🇸

@JonDingle Год назад

As usual a great video, plenty to learn from after seeing the master at work. Great to see you training your son up on AAG. When l finally get the right gear together for arc gouging you will be my training resource too. Top respect!

@Rogster559 Год назад

Father and son combination working together fantastic job and what you are doing step by step easy to follow guide , you are an excellent teacher well done , all the best from Tasmania Australia 🇦🇺

@scotthultin7769 Год назад

14👍's up IC WELD thank you for sharing

@toddthurlow8762 8 месяцев назад

Great job , I love watching your videos

@glennfryer1539 Год назад

Great to see Father & Son working as a team.. great job !! 🇬🇧🇬🇧

@danietkissenle 10 месяцев назад

my dad and always are butting head when we work until we start welding and operating equipment together then we are a team.

@shoppy00 Год назад

The weld looks fine, don't worry about it. It's great that you can pass on your skills with patience and explanations.

@jimgarrett7078 Год назад

Love to see Jr playing with fire and learning the trade.

@aserta Год назад

Job well done. Also, thank frak for the previous owner's cheap "repairs" because this meant you did your job to 100% and proper.

@steinmargunnarsson3709 Год назад

The best training is field training; hands on, real life training. Always enjoying your channel.

@sanjaysami4315 Год назад

Nothing fazes this guy. “ It is what it is “ get on with it. What a joy to watch this guy work.

@jakkranch3396 Год назад

Nice to see you're son not afraid of being thrown into the fire! Well done young man, chip off the ole block !

@arustydodge2111 Год назад

PROPER… ISAAC!⭐️⭐️⭐️⭐️⭐️ Always a learning experience. True enjoyment, seeing your son serving his apprenticeship under your guidance. He will be one helluva Tradesman, and Craftsman with your tutoring. You can teach him what’s not in books. Well done! God Bless !🙏⭐️😇👍

@mikalehtinen315 Год назад

I'm sorry, but I think it's a beautiful weld. Greetings from Finland.

@russellgilson4072 Год назад

Second generation learns a new skill, good video, good instructor.

@iceflameproductionz Год назад

Hahaha I was about to ask how you find help and then all the comments confirm it is your son. Bravo. I'm 23 and want a family and hope I can work with my son one day in my excavation business

@4211welderman Год назад

Great job. That’s exactly how my dad taught me. Trial by fire 🔥 lol. 40 years later I’m teaching my son the same way!! Keep the vids coming there helping me teach him some easier ways to do things !

@jaysonstoy3645 Год назад

Ark welding is an art form. Not every dance can be perfect. Another great video thanks

@hskim099 Год назад

What a fantastic father-son team. Thank you very much for walking us through the job.

@waynekahlbau9549 Год назад

I appreciate your skill level. It would help us guys that glue our own stuff back together if you might tells us the rod type, size, and amperage that you are using for a particular weld. Thank you for your videos, and I hope you are paid accordingly. Wayne

@ICWeld Год назад

Great suggestion!

@tmscheum Год назад

Kurtis at Cutting Edge Engineering does a really good job of that. I don’t understand any of it but he explains the wire type, feed rate, voltage, and shielding gas he is using.

@Prariedog Год назад

Great video, nice job Safe travels guys

@carlcarlamos9055 Год назад

Ah yes, grinding machines, putting food on the table for welders all over the world. Nice job. Take care. See you again soon.

@viking8781 Год назад

Awesome video. Sent here from meltin metal Anthony.

@azarellediaz4892 Год назад

This is my first of your videos, THANK YOU, thank you for teaching the trade to the next generation. What you are doing is what a good father does, he ensures his children learn skills that will put food on the table even if later they decide to go to college. This video is about a foundation drilling machine but you are the machine drilling a great foundation into your son’s mind. 👍🏼

@kaydog2008 Год назад

Obi Wan teaches young Luke the way of the arc force.🤜🤜🖐🖐May the arc force work with you young Padawan! 🤔🤔I always like welding weaves after the root pass on big pins. Plus I add a center hole to the pin ends so they can be easily located for the next time and punch mark the pin dia there too.

@APNFORD Год назад

Glad to see your boy getting more work in there. The only way he'll really learn is getting his hands dirty. Keep up the good work!!!

@JB-mf1zc Год назад

Isic I won't tell anyone !! God Bless!!

@garyyorke1080 Год назад

Awesome as always guys . Great to see the lad getting dropped in at the deep end , no time like the present to learn how to, no chance worrying if you can do it or not you got to do it Dads watching and so are we . Lol. Couldn't have a better teacher . And about this welding and grinding it off huh..lol. I'm sure there's a good few of us that would be chuffed to be able to get our stick welding to look anything like yours on a bad day . Many thanks for sharing the videos Issac.

@mcgama88 Год назад

A fair number of critical movements as arc to both removal and build up. I was watching with attention to detail. I had the view the weldment....and the machine operator were very skilled at the fitting to pin replacement. Thanks for the instruction. I really like to watch some techniques I seldom use but find needed on occasion. M.

@opendstudio7141 Год назад

Angle of the dangle is always a factor. All you can do is fight the fatigue and push on. 👍

@patriot1182 Год назад

Being a Water Well Driller from the northeast i can relate to this video! Great job men! I learned how to weld from my father also!

@robertoobregon3750 Год назад

At the beginning of the video was thinking when is he going to let young grass hopper use the arc air, then you you are teaching him how to. There is only one way to learn and that is to just do it. Having a great teacher sure helps.

@10seanf Год назад

I am so happy and jealous of you that your son is following in your footsteps. Job well done

@hfraat25 Год назад

Your son has a good teacher. 👍 I am sure he knows a lot already working with you. Take care both of you.

@cdnaudioguy Год назад

“Git ‘er done Big Daddy Isaac!”

@ICWeld Год назад

😄😄😄

@hairypaw9165 Год назад

" They call him big daddy Isaac! " Loved the video and great job as allways!

@Double_Vision Год назад

"WHAT'S YOUR NAME?! THEY CALL ME BIG DADDY ISAAC!" 😂

@janlesinski4719 Год назад

You are a very good welder field conditions are far harder

@jaymarshall7632 Год назад

Thank you for your Videos!! Your son is lucky to have a teacher like you.

@denniscarter483 Год назад

Beautiful work !!!

@ricanderson5717 Год назад

Thanks for bringing us along. 😀

@kevinmccarthy9780 Год назад

Good video Isaac

@jamescenter8288 Год назад

Awesome job to you and your son.

@davidmunro1469 Год назад

Thank you Issac and son. A great repair with no wiggle in that chuck. That beautyful machine will Now bend more rock drills😂😂😂❤

@gregwitkamp5583 Год назад

Beautiful job

@josephkessinger5973 Год назад

You do an awesome job of explaining to us what, why, and how to some degree, and I appreciate it. You seem like you would be a great instructor. Keep up the great job. You also do a great job of editing your videos. Thanks

@ICWeld Год назад

I appreciate that.

@darwin9141 Год назад

Love your channel. Thank you for bringing us along.

@mcfwelding Год назад

Always a clean job. You make it look effortless every time

@squeakywheel5274 Год назад

always fun to watch, great job

@rudyrivera7426 Год назад

Job well done! Thanks for sharing!

@James-fs4rn Год назад

👍 another fine job!

@venenareligioest410 Год назад

Superb job 👏🏻👏🏻👏🏻

@georgeescaped6035 Год назад

GOOD JOB SON !!!!!!!!!!!!!!! invaluable training !!

@nelsonglass6 Год назад

Great work from the master

@dev-debug Год назад

Cool job, always interesting to see equipment repairs. Your son learning the trade is great to see as well.

@davidsellars646 Год назад

Looks like it will work. That is pretty much what is important on this repair. Actually, I'd expect half the weld would be more than enough to keep that pin in place.