GE, Samsung, Whirlpool, Frigidaire, Kenmore, KitchenAid, Maytag it’s all the same DIY fix.
1. Clogged Water Filter - If not maintained this can stop water flow. You can usually purchase a new filter for between $30- $50. This should be changed out approx. every 6 months. If you have hard water you may want to change it even more often. (If there is a lot of new construction in your area, there can be more sediment entering the water system. This extra sediment can clog filter more frequently)
2. Water Supply Line - clogged, kinked, or broken water inlet house and valve. (unplug the refrigerator and turn off the valve’s water supply. Unhook the supply line from the fridge and point it into a sink or bucket and turn the water supply back on to make sure water is flowing) Check the filter at the point of entry into your fridge to make sure there is nothing clogging the line.
3. Faulty Water Inlet Valve - Frozen Water inside the supply tube, reservoir, down the back of your freezer, or an ice puddle at the bottom of your freezer. - Usually caused by a lack of water pressure due to a faulty Water Inlet Valve. This can be defrosted by turning off the freezer for about 20 minutes and using a hair dryer to make the process even quicker. Once line is thawed you can instal the new Water Inlet Valve and turn it back on.
I bought my specific one on Amazon Canada 🇨🇦 for $130 CDN
GE WR57X10086 Water Inlet Valve www.amazon.ca/dp/B00LQDI052?r...
Watch the video for a step-by-step on all of these fixes.
17 июл 2024
