No video :(

Frigidaire Electric Laundry Center Heater Assembly Replacement (137392702)

Подписаться 619 тыс.

Просмотров 47 тыс.

50% 1

Buy part 137392702 now: www.repairclin...
This video provides step-by-step repair instructions for replacing the heater assembly on a Frigidaire electric washer/dryer laundry center (model FFLE3900UW1). The most common reason for replacing this part is if the dryer will not heat.
Learn how to troubleshoot your washer/dryer combo:
www.repairclin...
This replacement video is applicable to the following brands:
Frigidaire
Connect With Us!
plus.google.co...
/ repairclinic
/ repairclinic
/ repairclinic
Join our VIP email list for discounts and money-saving tips: tinyurl.com/pnn...
Don't forget to like and comment on this video and subscribe to our channel!

Опубликовано:

5 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 22

@Soulless1388 2 года назад

Thank you, as I needed a quick review before I did this job.

@coloradoboo1071 2 года назад

Thanks, so helpful! My Kenmore was almost the same with the exception of an extra control on the right side but I was able to lift it up to get the top panel off.

@phillipparmiter9827 Год назад

This was perfect directions.

@richardtobias2430 3 года назад

codanni, In addition, ensure your exhaust tube is clear of excessive lint and not blocked. Otherwise, non-heating issue may reoccur.

@mattsimmons9604 3 года назад

On the GLET1031FS4 there are no 5/16 bolts on the back of the unit to remove the motor assembly. It looks like there are two screws, but they’re mounted from the inside. Thing is, you can’t get to them because the motor itself is blocking them. This also prevents the element from being removed. Any ideas?

@williampardo8719 2 года назад

my frigidaire gas dryer won't heat and i can't find the thermo fuse

@MrBLUETOOTH21 Год назад

Me paso lo mismo .. la pudiste arreglar?

@shitstinx 10 месяцев назад

03:47 - what is the part name/number for the black plastic block?

@rafaelcruz9423 3 года назад

Belt attachment to the motor was not explained

@jefferyk.spellerberg176 2 года назад

Yeah that’s very important - also forgot to tells us how to release the belt before pulling out the drum…

@djmips Год назад

Watch the whole video first and you'll see a part about reinstalling the belt which might be helpful.

@codanni 3 года назад

Great video. Replaced the heater assembly and my dryer still won’t heat. Any ideas?

@pennyclaggett5090 3 года назад

my dryer just went out too..

@p2o8wer 2 года назад

The drum won’t come out on my kenmore. Do I have to remove them 3 screws from inside?

@dennismartin5041 2 года назад

you need to remove all the screws from top of dryer top lid and lift drum up since it should lift out. You can also remove the 3 bolts and then reattach them when drum is out otherwise it won't be easy to align the holes to drum unit.

@lextr3110 10 месяцев назад

so much of a pain to do this..

@richardtobias2430 3 года назад

codanni, Test the 3 electrical components that are located around the outside of the heating element for continuity. these are the 3 components which are referenced in the video. Most likely one of them needs to be replaced.