Frsky R-XSR ACCESS firmware install

Подписаться 9 тыс.

Просмотров 13 тыс.

50% 1

Here is how to update your frsky R-Xsr from the old ACCST protocol to the new ACCESS protocol so you can use it with your frsky x-lite pro or S.
Get your fresh firmware here: www.frsky-rc.com/r-xsr/
If you have any questions please feel free to ask!
Buy me a beer or two: paypal.me/TweetFPV
Check out my Etsy store: www.etsy.com/shop/DEPrinting
Please like and subscribe. Leave a comment if you have any questions.
If you a interested in any of the products i used during this video please check them out using the links below. I do use affiliate links in my videos. They help me bring more content to you:
Thank you and keep flying!
Frsky X-lite pro: www.banggood.com/custlink/mKG...
Frsky R-xsr (BG): www.banggood.com/custlink/DmD...
Frsky-R-xsr (amazon): amzn.to/2HbPCCa

Наука

Опубликовано:

10 май 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 135

@NordicBlueRC 5 лет назад

As always, a nice tutorial. It was nice seeing some of those new settings in the menus.

@MCsCreations 5 лет назад

Really nice, man! Great to see new receivers available for ACCESS! 😃

@TweetFPV 5 лет назад

Yea, if they would just get the external multi protocol module, and the r9m lite to work with opentx 2.3 this radio would be in good shape.

@MCsCreations 5 лет назад

@@TweetFPV Absolutely!

@McSlapped 4 года назад

Hey just wanted to say thanks for helping me solve an annoying issue. I didn't have any telemetry but figured out it was because I didn't bind the receiver after binding the module.

@theronin48 5 лет назад

Thank you for your update videos on the Xlite pro. I'm a huge fan of the xlite and can't wait for this pro version. Hopefully they'll make firmware for others like XM+.

@TweetFPV 5 лет назад

I have seen some mention of the xm series of recievers being made to work with access.

@theronin48 5 лет назад

@@TweetFPV I hope so and I flash the XM+ via its sbus just fine off of my xlite.

@TweetFPV 5 лет назад

Hopefully soon. Since I got the xlite pro the software changes has actually been fairly impressive. Granted it should have been done befor they started shipping but I guess that just how electronics from China work.

@mike216ism 3 года назад

Helped me out a ton. Thanks so much. Amazon sold me a EU version. After flashing binding worked perfectly

@TweetFPV 3 года назад

Glad it helped

@mike216ism 3 года назад

@@TweetFPV big help. I assumed to choose external device for flashing. I had no idea S port was the correct choice. Have a great new year

@theronin48 5 лет назад

Also any specific release date seems to be around August.

@ReuCollinson 4 года назад

Thank you for creating such a clear video on how to do this. I have the X9 lite and RSXR and had a lot of trouble trying to get them bind. wasted like 4 hours with different methods found on the internet. watched your video and followed it step by step making sure that the firmwares match on both rx and x9. thank you!

@TweetFPV 4 года назад

Glad it helped

@GregQuillen 4 года назад

I tried both access and accst (instructions came for accst) but neither would bind. Tried a few times.. Then switched to xjt lite external module and binded instantly.. Feel like I'm losing range using xjt lite module instead of x9 lite s internal

@GregQuillen 4 года назад

I'm try changing radio firmware see if that works. Thinks its 2.3 or something

@TweetFPV 4 года назад

You'll need to update the operating system and the internal rf fw. Additionally you'll probably need to update the fw on the rxsr as well.

@warrenrose6362 4 года назад

This was a godsend! thanks a ton

@TweetFPV 4 года назад

Thanks for watchin

@dkathrens77 3 года назад

I just got my R-XSR and your ACCESS flashing instructions are very welcome, quite clear and easy to follow. Do you have any advice about antenna positioning onboard the aircraft? There are two antennas that seem to be made from tiny coax. Only about 1 inch of the inner conductor is exposed at the ends, which I take to be actual antenna. I am thinking only the last inch or so needs to be "in the breeze" and vertical. Must the black part of each coax (about 2.75 inches long) be straight as well? Also does it matter how far apart these two 1 inch antennas are mounted onboard?

@TweetFPV 3 года назад

Thank you for the kind words. The only part of the antenna that needs to be exposed is the clearish ends. Ideally you would want them oriented 90 degrees from each other and as far away as possible but it doesn't make that big of a difference if they are close.

@apextos81 4 года назад

Thanks for the tutorial. Will the r-xsr with accst firmware bind to access d16??

@TweetFPV 4 года назад

Yes it will but the radio needs to have opentx updated to monething newer than 2.3.0 and the internal rf module needs to be updated to access v1.1.3. I wouldn't recommend flashing v2.x to the internal module.

@blackmennewstyle 5 лет назад

Pretty cool all the options available with the bidirectional telemetry, that's so sweet :) So no more FCC or EU file when using ACCESS firmware? Did you see by the way, all the latest products anouncements from FrSky (which pissed off a lot of people)? Basically a new X9D and a new R9 system dedicated for ACCESS :/ I hope they won't screw up all the proud owners of X9D+ and R9M/R9, that would be pretty disappointing but i have honestly a bad feeling about it! Have a great weekend and keep on flashing :)

@TweetFPV 5 лет назад

I wouldn't worry. I see frsky making things ok for frsky users, all should be compatible with access but I think the legacy stuff will just be missing some of the features of the isrm products. But again who knows.

@GregQuillen 4 года назад

My R-XSR won't bind to access or ACCST on geprc cinepro. Came with instructions for ACCST but only binded to xjt lite external module. Do i need a firmware update?

@urielros98 4 года назад

how to install firmware multiprotocol?

@RR123 5 лет назад

Waiting for the R9M-lite Pro (1W) and updates for X9D+ with support for D16.

@TweetFPV 5 лет назад

I'm excited to see the lite pro module.

@gailpacheco8098 5 лет назад

Hello, do you know if the Xlite pro can already be used with RM9 Lite and R9 mini?

@TweetFPV 5 лет назад

You should be able to now but I have yet to test this with the xlite pro. The latest fw has some issues with fcc vs lbt. Basically it thinks my xlite pro is a EU version and won't let me go back to fcc.

@nandovelho1 5 лет назад

Valeu 👍 já inscrito

@zimzillakilla 5 лет назад

@tweetfpv the r9m lite module is working via nightly updates now.

@TweetFPV 5 лет назад

Good news. I'll have to look into that one.

@zimzillakilla 5 лет назад

It's a bit buggy, for example. If the radio is allowed to power on with any switch or throttle warning the module will not power on. You then have to cycle the module on the configuration to get it to work again.

@TweetFPV 5 лет назад

Yea I have it flashed now and am experiencing the same issues.

@zimzillakilla 5 лет назад

I'm happy w the range. Seems solid on the R9. I probably logged a total of 30 batteries w no rx issues.

@Chrismarquez7 3 года назад

I’m trying to update firmware in my R-XSR. I have a Taranis X9D Plus, do I need to get a cable with the mini usb to connect to my Taranis to my drone (chimera5)??

@TweetFPV 3 года назад

No. You need to connect the rxsr to the radio with a servo cable to flash fw.

@csabameszaros1869 4 года назад

Hi , Where can I get the cable that you connected the xlite with th R-XSR ?

@TweetFPV 4 года назад

They come with the rxsr. But you can get them here m.banggood.com/beelink/fuz09q

@aerialhorizonrc7827 5 лет назад

Can you do a video of updating the firmware via path through by using Beta Flight? It will be a pain to update the firmware for XM and XM plus since it already solder in with wires and tuck in nice and neatly without tearing it down with my BNF version of my quads. Can’t wait for them to release the firmware for XM and XM Plus.

@TweetFPV 5 лет назад

I will gladly make a video on flashing the XM series of receivers when the ACCESS FW comes out for them. I already have a video on how to lash a frsky RX using serial passthough. The only catch is the RX needs to NOT get power from the USB port. Sadly a LOT of flight controllers specify where to connect power for a RX and that pad most of the time gets 5V from the USB port.

@taterfpv 5 лет назад

I feel your pain :) It will be nice to eventually not have to deal with all the bs involved in removing, desoldering, having 3 different harnesses made for flashing, updating the R9M module for FPort on the R9MMs and realizing you just hosed 4 of your other quads and they now need to be disassembled and updated. Trappy is laughin his ass off. I honestly wish I had gone crsf right off the bat but my innate cheapness led me down the R9 road. This protocol looks like a light at the end of the tunnel :)

@williamklock2781 4 года назад

Hi Is that possible to bind the Taranis Frsky R-XSR without cable ?

@TweetFPV 4 года назад

Yes. You only need the cable to flash new fw to the receiver.

@brundog807 3 года назад

So, im at the binding part. Why do you choose ISRM and not ACCESS? Arent we trying to utilize ACCESS?

@TweetFPV 3 года назад

This video is very old. Frsky was using the name ISRM in place of ACCESS back then. Now you would select ACCESS.

@andrewc3609 3 года назад

Hi, is it possible that you have downloaded the XM receiver Access firmware?

@TweetFPV 3 года назад

The xm does not support access any longer.

@dk-eu7tj 3 года назад

hi its been a few weeks and i still cant bind ,, its solid red and green after i turn on the receiver and hold the bind button. i did the firmware update and fcc and my remote is fcc and flashed internal mod aswell. can i contact you through some website and pay for your services?

@TweetFPV 3 года назад

Hit me up on discord and I can help you out discord.gg/YrB7BSv

@jordannovek2911 4 года назад

Great help this vide, just one weird thing is I have the options menu for the rXsr but there are no options in it . I wonder if its because I have the x9d.

@TweetFPV 4 года назад

X9d 2019?

@jordannovek2911 4 года назад

@@TweetFPV Yes it is.

@TweetFPV 4 года назад

So you should have some options for the rxsr pop up but it's been hit or miss for me. That's how you set the rxsr up for fport mode or low latency mode and a few other options. I still haven't pinpointed why it intermittent.

@jordannovek2911 4 года назад

@@TweetFPVOnce I hit the options menu mine says "waiting for rx " As long as I can still fly..In your menu where you chose isrm mine says access and underneath that I choose ch1-8 and It says 7ms. Im on open tx2.3.4.

@TweetFPV 4 года назад

Yea that's what mine will say when it doesn't work but I can fly just fine.

@AndrewBlanche 5 лет назад

Is the access firmware strictly for xlite pro cause I can’t get Fport to work on my Qx7 and am stumped

@TweetFPV 5 лет назад

ACCESS and F.port are two completely different things. If you are trying to get F.port to work with a F4 flight controller most likely your issue is that F.port needs to be connected to a UART TX pad that also has a built in inverter unless you are using a inverted F.port signal. Can you give me more details on your setup like which FC and RX you are using?

@jlqtraceur 4 года назад

I flashed one of my r xsr succesfully but i bought a new one and it doesnt flash. It gives me an error. I already tried with the 3 versions of access firmware but nothing. Do you know what might be?

@TweetFPV 4 года назад

My guess is that you have the wrong wires connected to the rxsr for flashing. Be sure you are soldered to the smart port pad and are selecting flash s.port in the radio.

@jordannovek2911 4 года назад

Hi, I have the X9D 2019. I just flashed my radio to 2.3.4, you set your internal rf to isrm. Mine has access and accst D16 only. Do you know if isrm is in 2.3.4

@TweetFPV 4 года назад

Isrm is a separate fw that needs to be loaded. Opentx is the os on your radio the isrm is the internal radio module. You can get the fw for that from frsky. Com or you can check which version you have in your system menus. Btw you need to have a model selected that has the internal rf module tuned on to power the isrm and see the fw version.

@jordannovek2911 4 года назад

TweetFPV Thanks, Yes I saw where it says the isrm version. I believe it said 1.10-1.1.3 fcc It was something like that. I googled isrm and I think I have the latest. Just one question, is this something I should update update every time theres a new version ? Ive only been flying for about a yr but it’s the first I hear of the isrm.

@TweetFPV 4 года назад

@@jordannovek2911 yea whenever there's an update it's a good idea.

@pino7946 4 года назад

good I have x9d + se2019 and I can not see flash s.port in the access menu to put the firmware of the r-xsr, I only get the previous methods flash external module and flash internal module and that's how I've done it, I have in the x9d + se 2019 FW-X9DP2019-ISRM-V1.1.3 and opentx-x9d + 2019-flexr9m-lua-es-2.3.2, I don't know what I'm doing wrong or I don't know if the r-xsr doesn't support flash s .port, although I see it in videos of frsky xlite, could clarify doubt, greetings.

@TweetFPV 4 года назад

The 2019 edition has a s. Port plug in the battery bay on the right hand side. Connect your rxsr to that and select flash external. That should flash your rxsr.

@pino7946 4 года назад

@@TweetFPV ok thanks I'll try it, as I see it goes in this order gnd vcc sp Regards.

@Athiril 4 года назад

I always get registered successfully, but cant bind after registering the r-xsr, I can’t remember how I solved it the first time

@TweetFPV 4 года назад

After you register power down the Quad. Go to one of your rx slots at select bind then plug the Quad in. The reciever looks for a binding signal from the transmitter in the first few milliseconds of powering on. No need to press the bind button on the receiver.

@martin336able 5 лет назад

I follow the tutorial with updated RX (XSRX with ACCESS v1.1.1.1) and TX (latest firmware with ACCESS). On TX, the only option for internal RF is ACCESS .... using ACCESS I cannot register/bind the RX. COuld you try to repeat this tutorial using ACCESS on internal RF, please ?

@TweetFPV 5 лет назад

If you have internal rf selected on a model then go Into the radio setting and see what version fw is flashed to your isrm and what region it says (fcc or lbt)

@cometpowell 3 года назад

I get an error right after it says device reset. any insight on this?

@TweetFPV 3 года назад

there has been a lot of changes to the frsky ecosystem since this video. I highly recommend making sure your radio's operating system is updated as well as the ISRM FW.

@pdsfpv1495 5 лет назад

Does ACCESS do over-the-air firmware updates?

@TweetFPV 5 лет назад

Yes it does!

@pdsfpv1495 5 лет назад

Pleas do a video on it. That would be helpful to know how it’s done 👍

@TweetFPV 5 лет назад

I will when there is a FW to push a over the air update too. As of right now the only FW available is to convert to ACCESS and that is done the old way.

@seahookfpv 4 года назад

Hi I’ve got my New FrSky 9D SE 2019. And this is my first time I bought a BNF drone. And the reciever is R-XSR. Do i need to download the firmware to the controller? Hope you help me.thanks.

@TweetFPV 4 года назад

Possibly. If you can create a model in your radio that uses accst d16 then you should be good. If you can no then you will need to update the os on your radio.

@seahookfpv 4 года назад

@@TweetFPV isaw on my seettings have accst d16. but idont know how to bind my quad :( to my controller. thank you fro the reply sir.

@seahookfpv 4 года назад

@@TweetFPV can you help me sir.

@seahookfpv 4 года назад

Acutually i bough a BNF quad and the receiver is R-XSR.

@TweetFPV 4 года назад

It should be fairly easy. You will need access to the bind button on the r-xsr. Basically to out the rxsr into bind mode you need to hold the bind button down while powering the Quad on. This can be difficult one handed. If it's in bind mode the red led should be flashing. Then select bind in your radio. Exit bind mode in your radio and unplug your Quad. When you power your Quad back up you should see a solid green, red, and blue light.

@afifathnin 4 года назад

hey man must i rebind once ive updated the rxsr? anyway ive updated to the latest isrm updatev1.3 and the latest firmware for the rxsr accst . seems theres no input

@TweetFPV 4 года назад

Are you trying to bind to your rxsr with access or accst? Also what color are the lights on the rxsr after you bind?

@afifathnin 4 года назад

ive updated the firmware on my rxsr as the latest accst. also it was already binded to my xlite pro. theres a solid blue and green light.

@TweetFPV 4 года назад

Well it sounds like it's bound. My guess is you have something wired incorrectly between your rxsr and your fc then. A very common mistake is soldering the s.port wire from the rxsr to the sbus pad by mistake. Or using f.port on a f4 fc without a built in inverter.

@TweetFPV 4 года назад

Join my discord and I can help you better. Pictures help a lot discord.gg/H32cpV

@afifathnin 4 года назад

it was already bounded and i flew it, its just that ive tried updating to the latest firmware. apparently my xlite pro couldnt fly but the range couldnt go anything beyond 100m and frsky said to update to the latest firmware and now i got it binded and no inputs

@pageian2254 5 лет назад

how are u creating a new model ? i cant select if i want quad copter or drone ....

@TweetFPV 5 лет назад

Does it make a model just without the setup wizard?

@pageian2254 5 лет назад

Exactly !

@pageian2254 5 лет назад

Dont Know how u did that

@TweetFPV 5 лет назад

Normally it's a option in opentx companion when you flash opentx in this case it just came setup to have the wizard. It's strange that yours doesn't to that. Are you using the xlite pro?

@pageian2254 5 лет назад

Yes il using x lire pro

@jttinsleyjoey 4 года назад

Mine won't register for some reason! no clue what i did wrong. any ideas? thanks

@TweetFPV 4 года назад

Most likely you have different fw flashed to the rx and the xlite. Which rx are you using?

@jttinsleyjoey 4 года назад

I have the rxsr, with x lite pro. First off, I had put the d16 fw on it for my older quad. But just built a new one and wanted to be on ACCESS. So I flashed both the rxsr and the x lite pro. At first I had the wrong sd card contents, it would tell me when I powered on the x lite pro. Got that figured out. But still won't register.

@jttinsleyjoey 4 года назад

Should I reflash the x lite pro? I think I have the latest fw for the rxsr. I have the 1.3 and the 1.4 being the latest. Wasn't sure which one I actually need

@jttinsleyjoey 4 года назад

I finally got it figured out! Turns out I needed to flash rxsr with fw 1.1.1 f port. I was trying 1.1.3 and 1.1.4 thinking it would have it all. Now it's all registered and bound, thank you!

@jttinsleyjoey 4 года назад

.. so I got it bound and what not. Now there is no stick inputs on kiss gui. I've made sure rx is in the right mode. But now I think it's an fport fw issue. I'm clueless about all of this so it's pretty difficult

@doktordrone 4 года назад

we don't need sd card, right?

@TweetFPV 4 года назад

If you are programming from the radio then yes. Otherwise there isn't any accessable storage in the radio.

@doktordrone 4 года назад

@@TweetFPV thank you very much 🙏🙏

@TweetFPV 4 года назад

No problem

@TheCiardellas 5 лет назад

can't get my x-lite to recognize any of the firmware I put on the SD card..

@TweetFPV 5 лет назад

Which firmware are you trying to put on your xlite. Is it for the xlite or for the recievers? Do you have the xlite or the xlite pro.

@TheCiardellas 5 лет назад

TweetFPV I have the x-lite(regular) I figured out that I needed to formate the sd card on the xlite.. looks like the sad card is working now.. still can’t seem to get my r-xsr to bind though

@TweetFPV 5 лет назад

The rxsr can be tricky to bind. It has the ability to switch into cppm mode if you hold the bind button for 4 seconds after its powered on. You can tell if you are in sbus mode because the led will be blue.

@TheCiardellas 5 лет назад

TweetFPV I managed to get it to blink red like it says it’s supposed to while binding but then when I unplug the battery shut off the bind on the radio then plug it back in it’s still blinking..

@TweetFPV 5 лет назад

Are you trying to bind in d8 or d16 mode

@alexandersherman419 4 года назад

mine wont register

@TweetFPV 4 года назад

Did you update your isrm firmware and the access fw on the rx? Because they have to match. Ie you can't have isrm v1. 1.3 on the radio and access V 1.1.2 on the receiver. They need the same.

@alexandersherman419 4 года назад

@@TweetFPV was using the access firmware just had to flash the first version of access to the reciever. Got it all working and it flies great