Fuel Injector Replacement / Misfire Fixed (K7 GSX-R1000)

Подписаться 921

Просмотров 7 тыс.

50% 1

Fuel rail removal and replacement of the top four fuel injectors on a 2007 or 2008 Suzuki GSX-R1000. This repair fixed a bad low-end misfire (below 8k RPMs) by rotating the bottom fuel injectors with the top fuel injectors,to be sure the problem was coming from the bottom injectors, and then replacing the bad injectors that were moved to the top.
NOTE: The wire connectors are much more difficult to remove on the bottom injectors than the top ones. I demonstrate the easiest way to disconnect them on my PC5 install video linked below:
• Installing Power Comma...
DISCLAIMER: Lonely Ryder is NOT a professional mechanic and is NOT responsible for any injury or vehicle damage that may result from individuals attempting the repairs shown in this video!
You have been warned, try at your own risk!
Outro Music: "Demon" by JVNA (RU-vid Audio Library)

Авто/Мото

Опубликовано:

20 июл 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 22

@tooljunkie555 8 дней назад

Bout to buy a 14 1000 tht misfires at 4k and is gtg at 8rpm+ I watched this and it fixed it! Ty for sharing and tht little switch the tip n bottom .it seemed fine after swapping the top n bottom but still bought new injectors and gtg now thanks again bro ride safe!

@lonelyryder7441 5 дней назад

Sure thing!

@ZRider-ct8ce 7 дней назад

Hi TY for sharing the tips i buy a gsxr1000L1 and ihave same trouble so i open YT saw you post video and i fix it thank you!! (sorry my english is not very well but i just want to say i very appreciate)

@lonelyryder7441 5 дней назад

Glad it helped you!

@jacamoslambomonty3985 7 месяцев назад

amazing video and tips, you know your S! THANKS

@IN_ZANE_ 8 месяцев назад

Good video, thought you might have put the new refurbished ones back in the primary location. Not a big deal I guess.

@shawnwilson2097 3 месяца назад

I had to subscribe brother because you jUSt saVed me a HeAp oF cAsH 😅😂 I can't tHaNk yOu enOuGh bless yOu bRo!!!! RiDe sAfe!!

@lonelyryder7441 3 месяца назад

Glad I could help

@cotybechtel3466 10 месяцев назад

Nice

@nevernotworkingkr 8 месяцев назад

Having the same problem but it sputters on the high side for me, imma try this method

@iulianigna6272 11 месяцев назад

You can use a JIS screwdriver for the "philips screw". JIS is the japan "almost philips", if those are JIS screws than using a philips bit will strip them off. All the best!

@IN_ZANE_ 8 месяцев назад

Yeah exactly this, idk why people that work on bikes often seem like they don't know about JIS

@lonelyryder7441 7 месяцев назад

@@IN_ZANE_ I forgot about the Japanese Philips, never owned a set myself, maybe I should add that to my collection. Anyway the point I was just making in the video was that if someone before you already chewed the crap out of them, you could use a dremel tool to salvage them so you didn’t have to hunt for new ones online. They are a specific screw machined with a spacer, so kind of hard to find.

@dagachamemestho7489 3 месяца назад

Japanese Industrial Standard

@afbratk1d101 11 месяцев назад

Is there a way you could do a tutorial for the Gen1 Z1000 ignition switch assembly replacement?

@lonelyryder7441 11 месяцев назад

Possibly, when I get some free time. I do show a front end disassembly on my handlebar install video, that will get you part of the way there. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3Ixi62qqxSE.html

@cotybechtel3466 10 месяцев назад

@lonelyryder7441 Im about to change mine out on my k8 1k and looking at buying some from eBay for 150$ for the set… is that not a good idea?

@lonelyryder7441 10 месяцев назад

@@cotybechtel3466 That's what I paid for a set of 4 OEM injectors that were sonic cleaned and tested from eBay. So far they have been working great!

@hhetjjdvkjff9725 3 месяца назад

Where off eBay did u find your injectors having to replace mine now and do not want to spend 300 a injector

@lonelyryder7441 3 месяца назад

Here is the person I bought from: www.ebay.com/itm/285175644644?itmmeta=01HSHCQ83HQ0HR8HKFX5MYKXVK&hash=item4265cb01e4:g:BHkAAOSwkbdkCOBJ Looks like he only has 4 left. If you need 4 more, you'll have to buy them from another vendor, just make sure it says "OEM".

@msn83235502 7 месяцев назад

** EDIT - nevermind, i just saw your PC5 video.. so the middle injector is quite hard to reach. thanks for your video, i got PC5 hooked to my bike too. can you make a video on getting those lower injector connector. i'm having problem to take out the wire connector since the clip is too tight on the lower injector. i'm afraid i might strip the wires out. do you have any special tools or something to do it. i have same bike as yours.