Really appreciate your taking the time to put this out there brother. It saved my ass several times and I could not have done it without you. Saved me $678.00 to have it done at the dealership! Thanks again…
So if you do get a code, how do you clear it out? On my dash it shows’ECM Y’ instead of ‘ECM N’. Is this something I’ll need a lab top/dealership intervention? Never mind,… it cleared! Great tutorial!
My dude .... awesome video ... bout to do this ... I got the push back seat and full arm extension is killing my carpal tunnel.. I'll be doing the stereo Rockford Fosgate stereo to the 2nd amp and lowers and bag speaker upgrade .. hoping you got a video on that as well
@ridefitnation ok well if you go Rockford Fosgate... id highly recommend getting through the dealership or call Rockford directly... theres a special kit to put the amp in the bags all plug and play
"And when I say brother, I don't mean, like, an actual brother, but I mean it like the way black people use it." - Zoolander 😂 Nice bike. Thanks for the video! Very informative.
Thanks for such a well narrated and detailed video. Would you say I could get away with installing a 16 inch set of dominoes without an extention kit? I live in South Africa and just imported a set of 16 inch dominoes from Handlebar Lee, challenge is our Harley dealer does not stock extention kit nor is there local availability of such
@@ridefitnation Thanks for the prompt response. Does that also apply to the clutch and brake cables or just the electronic wiring would be too short for 16 inch bars?
thank you ,great work bro , ima install my 16" hammerheads my self. the dealer try to charge me 1300 dollars and said that if I do it my self it will void my warranted . we'll fuck it void my warranted then lol .
They are lying to you man. Only engine parts can void your warranty. You will need to remove the tank which is easy as heck to run your new break line. Save that money and get to know your bike. Don’t get frustrated with it and take your time.
So with the 14s you don’t have to change the wires and how much taller from the factory bars and how comfortable are they driving on the highway And can you maneuver a good in and out of traffic??
I been checking out a lot of these videos. Not one of them has changed the riser bushings. Should just be one ground wire and three pinch bolts on the top tree.
I changed the riser bushings on my personal bike because I have 20” bars. I didn’t have any wires on mine. Just the two bolts. Not sure what you mean by three pinch bolts and ground wire. Explain.
Just trying to figure out how the riser bushings are changed out on the Road Glides. Harley recommends changing them. I saw a video were they pulled off the top part of the tree. Because of those bushings there was a ground running up to the bars. Maybe I will just invest in service manual.
What is the diameter of the risers on stock 2022 road glides? I have the ST and need to do a 14in bar swap. Will 1.25in bars not fit in the stock riser?
@@shadmcpherson4512 if no power is coming on then you probably connected the wires wrong down by the handle bar riser area. Low tire pressure is a error code that you can clear or harley could clear it for you.
Please help…have two skinny connectors left unconnected. I’ve researched that one/ male connector is for heated grips. The other is coming from the bike itself not the handle bars…what’s it purpose?? Thx
@@ridefitnation thx I figured it out. The connector coming from harness is the power for the heated grip, which u have to remove the cap. The other connector coming from the throttle by wire from the bar itself is also for heated grips.