Тёмный

FULL BUILD: Upgrading A 1974 Ford F-100 With Track Power 

POWERNATION
Подписаться 1,6 млн
Просмотров 1,2 млн
50% 1

The Truck Tech team picks up a 1974 Ford F-100 and brings it back to the shop for a quick inspection. Then it's off to the dyno for a baseline before going to the road course for a thorough shakedown run.
The guys bolt on some budget suspension upgrades that will lower it 4 inches closer to the ground, then throw on some sway bars to reduce body roll. Next, it's time to tackle a rear end upgrade before the engine goes back together as the guys hope to improve power of this weak 351 Windsor. New rubber, rims and custom exhaust will wrap up Stage 1.
The measly 146 HP at the wheels will be a distant memory when the freshened-up Ford heads back on the chassis dyno. Finally, it's onto the race track to compare the newly modified truck against its own baseline!
#ford #f100 #fullbuild

Авто/Мото

Опубликовано:

 

25 май 2021

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 703   
@Sabahes_ASMR
@Sabahes_ASMR Год назад
This show is basically 90% commercial segments, and 10% actual show.
@BBCMONTE34
@BBCMONTE34 11 месяцев назад
Crazy nice truck before getting touched.
@Blando7887
@Blando7887 3 года назад
Id be happy with that truck the way they got it
@stevenmyers2252
@stevenmyers2252 3 года назад
Agreed, that's my dream truck.
@j-r1277
@j-r1277 3 года назад
You don’t sound American with that attitude.
@ronaldoandrade4259
@ronaldoandrade4259 3 года назад
Kopp pppp
@ronaldoandrade4259
@ronaldoandrade4259 3 года назад
@@stevenmyers2252 e outros l
@ronaldoandrade4259
@ronaldoandrade4259 3 года назад
@@stevenmyers2252 o ppoplpppppllpp k
@hunterdavis1663
@hunterdavis1663 3 года назад
That truck was beautiful from the start
@user-nq1sq6mx2x
@user-nq1sq6mx2x 5 месяцев назад
Old Fords never die - they just go faster :-)
@TheJeracuda
@TheJeracuda 3 года назад
140 hp on a stock 1974 engine is actually pretty impressive
@nathanmcdonald610
@nathanmcdonald610 3 года назад
Yeah especially considering that was ''wheel HP'', it was probably laying down close to 200hp at the crank with those numbers which is laughable for any modern V8 but something made in the 1970's smog era, that's not bad at all.
@coache1nine
@coache1nine 2 года назад
I agree. Emissions killed power on more than a few vehicles in the '70's. Truck ran strong before they put a wrench on it
@alpercagangunes
@alpercagangunes 2 года назад
my 2009 peugeot is 75hp :')
@TheChaztor
@TheChaztor 2 года назад
@@alpercagangunes Not at the wheels Im guessing.
@joumasepoes88
@joumasepoes88 2 года назад
Wasn't a stock 74 engine. It had a small cam and intake, but no telling what year the old boat anchor engine actually was, as no dentside truck 73-79 EVER came stock with a 351w. Besides, the 351w was NEVER meant to be a performance engine. Kind proves that here........ If I'm going to take the time to swap a small block for a small block it will be a Cleveland for me. They actually make power.
@strongocho
@strongocho 2 года назад
I remember in the golden age of TV obsessing over these type of shows. I am so glad I found this channel. Stuff like this is what got me into working on cars/trucks/motorcycles at a young age. Awesome truck btw. I am currently working on planning out a 1991 ford ranger build. The 30 year old 4.0 is kind of shot, but the body and frame are rust free and interior is mint. Perfect project truck. If I can get my money straight, I am putting a 302 in it.
@chappeah
@chappeah 2 года назад
i've seen rangers with 302s rip down the road like a bat out of hell. fun little trucks
@iambiggus
@iambiggus 2 года назад
Good luck with that.
@antoniovarenas8269
@antoniovarenas8269 2 года назад
@@chappeah ííííiíí
@drewdoestrucks
@drewdoestrucks 2 года назад
“Love working on these old engines because they don’t require any special tools.” Multiple times throughout the build “make sure you use the special tool”
@MaffettMotorwerks
@MaffettMotorwerks 3 года назад
This was an awesome project and glad to be a small part of it. Thanks y’all!
@DDay-zm7bc
@DDay-zm7bc 2 года назад
I I grew up with 75 Ford F100 with a 351 in it. Truck was in the family for 30 years
@Motorhead-y3
@Motorhead-y3 Год назад
As a 1985 grad, nothing better than a 429CJ Shorty F with widetracs a a Pioneer Silver with Cricket 6x9s
@westtexan2263
@westtexan2263 2 года назад
You guys brought back an old memory while driving the stock truck around the track. When I was in high school I had a 69 f100. We had just finished up baseball practice and I was going to take a friend home. I had the whole school parking lot to myself and floored it towards the exit on the far side. I was making a gentle arc while pouring the coals to it and she came up on two wheels with the passenger side up in the air. My friend was about to poop his britches as I just took my foot off the gas and straightened her out a little and she came back down. He thought I did it on purpose and I never told him any different. But the truth is it scared the crap out of me too. Good Times!!!
@joeythebeau2316
@joeythebeau2316 Год назад
Like that comment
@davidlewis3169
@davidlewis3169 3 года назад
I had a white '74 F-100, with a 302, 3 speed manual W a granny gear and the Blue-Bird bus shifter...Long Bed, and 2 30 Gallon tanks from the Factory. I LOVED that Truck!
@ChuckCanada1
@ChuckCanada1 11 месяцев назад
Removing the bolts under the truck bed where the leaf spring was, adjusting the leaf spring to make room. That right there is the definition of work smarter not harder. Well done.
@stevenwdoolittle1195
@stevenwdoolittle1195 3 года назад
You say it dont sound fair about selling cheap but remember you are doing them a favor when they need money! They could be feeding there baby so you are a good man theo
@landrelarose745
@landrelarose745 Год назад
Hey guys. I saw that truck before the two of you started modifying it. Thanks for choosing a Ford because it's my favorite auto company. As you probably know, it's not the brakes that are the problem. It's the tires. When they don't have any grip, they will constantly squeal. You know that's not acceptable. It's time to continue watching you build it.
@finnthehuman5260
@finnthehuman5260 3 года назад
Thank god carcass didn't touch this beautiful truck
@mattschaffer7451
@mattschaffer7451 3 года назад
Glad the video's title doesn't read,"Today on Carcass, we destroy a perfectly nice F-100 by turning it into a drift car." Lol
@Timman57
@Timman57 3 года назад
Atleast it didn't make its way to Whistlin Diesel lol
@CJColvin
@CJColvin 3 года назад
Same here brother.
@nasilemak868
@nasilemak868 3 года назад
@@Timman57 that poor Hilux tho
@Timman57
@Timman57 3 года назад
@@nasilemak868 I agree, a damn shame, my buddy has been looking for a mint one for about 5 years now lol but then again he just doesn't wanna pay the money.
@jaggeh3340
@jaggeh3340 2 года назад
I am glad this stuff is moved onto youtube. trying to fit it all into a 30 minute episode spread among odd time slots on tv sucked compared to this
@marlobreding7402
@marlobreding7402 3 года назад
400 horsepower with dished pistons? Somebody's Dreamin.
@marlobreding7402
@marlobreding7402 3 года назад
@@michaelbrinks8089 I thought I heard the degrees at .050" lift from base on both lobes to determine it's center line and lobes separation.
@BuzzLOLOL
@BuzzLOLOL 3 года назад
Prolly 425-435 flywheel HP @ 6,000 RPMs with headers and better pistons...
@carlwray4627
@carlwray4627 3 года назад
Such a nice truck,i d be satisfied with it stock
@mickeythompson1562
@mickeythompson1562 3 года назад
The First generation Lightning F150 was twin I beam and handled pretty dam good
@El_Chompo
@El_Chompo 3 года назад
The quality and length of these videos is top notch guys. Keep it up.
@offroadastroothervans.4685
@offroadastroothervans.4685 2 года назад
Did not know LT WAS ON HERE FIRST
@backyardbuilttrucks1
@backyardbuilttrucks1 3 года назад
Best thing all older Ford's are know for , are the front cab mounts , I still have templates I made to do rust repair from back in the 90's. Love bump and dent sides . Don't knock carbs guys . I kick a lot of butts with a blow thru setup.
@kermitsuicide4369
@kermitsuicide4369 Год назад
I’m gonna say I flinched when you almost dropped that oil filter 😂 I know the pain
@edwardprzydzial
@edwardprzydzial 2 года назад
i love this truck... great job guys what you did for this '74 is awesome. she looks better and is faster and tougher. nice job! also, glad you guys left the look alone. kudos!
@richardcarr6493
@richardcarr6493 2 года назад
THIS IS EXACTLY what l want for a FORD F100 simple and fast enough but reliable to be used every day .This to me is better than anything NEW . FYI a Bluetooth speaker is all l need for tunes but if the stereo has it that s all good too !! But l would like some cup holds for coffee ;)
@mrmike115
@mrmike115 2 года назад
we used to use a flat sander for bodywork to re scuff the heads and block when doing rebuilds it worked amazing, saved lots of time! cool truck cool rebuild you guys have done!!!
@joshuakruty6967
@joshuakruty6967 2 года назад
You guys are the only people I would ever trust to touch my 87 F-150. Please she needs help and I have limited means and resources. I need the power nation rescue van ❤️
@AndrewOtwellMusic
@AndrewOtwellMusic 2 года назад
Great job guys. I did the same type of build on my 1969 F-100 and it is a people pleaser.
@drewsinger6570
@drewsinger6570 3 года назад
Yes. Yes, And more yes.
@bradyarebalo9342
@bradyarebalo9342 3 года назад
Yesss I’ve been looking for tips and tricks for my truck and engine I have a 73 f250 highboy
@robertfogarty3253
@robertfogarty3253 3 года назад
i hope to fix up my 77 2wd f250 Mom & Dad put camper on top,105 thousand later its mine
@bobhilly546312156332
@bobhilly546312156332 3 года назад
360 or 300?
@bradyarebalo9342
@bradyarebalo9342 3 года назад
@@bobhilly546312156332 390 FE
@carguy3028
@carguy3028 3 года назад
That track run looked fun when the truck was stock lol.
@jbone9900
@jbone9900 2 года назад
Sadly rice tech got her
@johnbehneman1546
@johnbehneman1546 Год назад
THANK YOU SO MUCH!!! A TOTALLY AWSOME BUILD!!!! THIS IS SOMETHING ANYBODY CAN BUILD!!! A GREAT DAILY DRIVER AND GREAT FOR AUTOCROSSING EVENTS!!! THANK YOU TO EVERYONE INVOLVED IN THIS PROJECT!!!! SHE CAME OUT TOTALLY AWSOME!!!! I LOVE EVERYTHING!!! GREAT VIDEO AND A GREAT BUILD!!!! THANKS FOR SHARING!!!
@pointreyes4272
@pointreyes4272 Год назад
I bought a brand new midnight blue metallic 74 F100 when I was 19 years old. I traded it in on a 78 F150 same color. I should have kept both of them:)
@petersimpson1734
@petersimpson1734 2 года назад
Wonder how much more power it would have made with quality headers and a decent exhaust.
@martinian0340
@martinian0340 3 года назад
Love this channel and these long videos!
@jamesmcnamara7484
@jamesmcnamara7484 2 года назад
I lowered mine for about $100. I flipped the spring perch, made a longer shackle, cut, and rotated the spring pads to correct the pinion angle. Up front I used (I think) 93-95 Ford Explorer progressive coil springs.
@bmh67wa
@bmh67wa 3 года назад
Ford didn't put a 351W in pickups in 1974. They had 240, 300, 302, 360, 390, and 460. No 352, 351W, or 351M.
@izzynutz2000
@izzynutz2000 3 года назад
Unless it was specially ordered
@donreinke5863
@donreinke5863 3 года назад
@@izzynutz2000 Couldnt do that. Each engine installed in a vehicl,, even light trucks had to be EPA certified for the vehicle, even back then.
@donreinke5863
@donreinke5863 3 года назад
If that was a 4 barrel Windsor it came out of a 1969 Ford, likely a Mustang but possibly a Torino.
@BuzzLOLOL
@BuzzLOLOL 3 года назад
@@donreinke5863 - Car 351W's got 2 bbl. carb.s after 1970, but trucks got 4 bbl. carb.s... but compression ratio dropped into 7's... those piston dishes look like ashtrays! Engine in my '78 F150 is 351M and sticker says "emissions exempt" because it's a truck... Those 351W heads had rocker studs with 5/16" threads on top, 1/4" base circle, and they broke off above 5,000 RPMs... those cast iron rocker arms also break in half above 5,000 RPMs... don't ask how I know that... LOL!
@briansearles4473
@briansearles4473 2 года назад
@@BuzzLOLOL I have never seen or heard of any Ford pickup that came with a 351 4bbl. They all had 2bbl's.
@frankcherry3810
@frankcherry3810 Год назад
This was so funny! Reminds me of ‘Smoky and the Bandit’
@crazyhorse8508
@crazyhorse8508 2 года назад
Another low rider classic American truck..But I grew up watching these guys back before it was horsepower tv ..think it was hot rod tv an trucks came later..stacey David's an the blonde guy ..dam I'm getting old
@whoahthere
@whoahthere 2 года назад
Thank you for all the good info and ideas for building my 72' f100 302.
@tudrow6087
@tudrow6087 3 года назад
Oh man I love that truck! I had a 75 baby blue with a 428 cj in it. I'm still kicking my butt for trading it.
@coling6103
@coling6103 3 года назад
Baby blue you say!!!! Kinda like mine
@tudrow6087
@tudrow6087 3 года назад
@@coling6103 Yes Sr.
@johnvineyard67
@johnvineyard67 2 года назад
pat engine power , be lost,, if lost a pen,, he has in a pocket .. lol,, love this guy ,, he loves his job... knows his stuff ...
@rickitynick4463
@rickitynick4463 2 года назад
I'm jealous of a small guy that can fit into an engine bay. My big ass has to get bent up to fit into anything.
@MackHeath-ns7ly
@MackHeath-ns7ly 2 года назад
thank you for showing Fords are not as badas some might have people think and they do have some good trucks and cars out there my Dad worked for Ford's for 19 yrs got hit and killed by a Chevy but I do not blame the Car I blame the driver of the car that hit my Dad that said keep up the good work and God Bless both of you
@jacobsills8257
@jacobsills8257 2 года назад
That color is BEAUTIFUL
@davidhyde4997
@davidhyde4997 3 года назад
This is going to be good. I got a 1977 f100 that I would love to get it to handle better
@IanPaiceMetalArt
@IanPaiceMetalArt 2 месяца назад
Great vid. I wish I could make full sized cars like you. I only have a small shed, so I'm limited to fabricating small ones. But still its fun
@magnumcipher4971
@magnumcipher4971 3 года назад
The architecture of the LS engine family is strikingly close to the venerable old 351 Windsor.
@branon6565
@branon6565 3 года назад
Yeah but only a real a**hole installs a Garbage Motors manufactured junk chevy engine in such a nice Ford....
@renripari5514
@renripari5514 Год назад
With the track time ! One of you is much Lighter than the other . No disrespect 😤 Kind Regards REN
@johnhoward5348
@johnhoward5348 Год назад
I need that 351 for my old Ford . Love that truck .mines been sitting in the woods here in Missouri for 15 years
@jasongilbert2379
@jasongilbert2379 2 года назад
Had 1 identical to it in Light Grabber Blue with a 390 … beautiful trucks:)
@johnvineyard67
@johnvineyard67 2 года назад
omg... you guys are... really givn the guys that built this truck .. a ear to ear smile .. i think it kicked ass .. for what it is ,, it didnt break down, or complain,, props to guys built it,,, bet your ass a guy could improve it... guess will see .. be nice see you upgrade whats there,, and not,, molest it....
@josephatkins6581
@josephatkins6581 3 года назад
Thank you for caring enough to reply to this old man
@bigblockford3059
@bigblockford3059 3 года назад
Ohhhh HELL YES! Thats a badass truck!!
@lincolnstovall9471
@lincolnstovall9471 2 года назад
It may not have started out, she looks great!!! Trucks are my fav.!!!
@B1Springfield
@B1Springfield 3 года назад
I might be mistaken, but I didn’t know they came with 351 Windsor’s. I had one, same year, a Ranger, with the 360, 4speed. Miss that truck lol. I have a 73 that is in need of major work, but I’ll get to it I’m glad they mounted the white letters out, looks way better.
@bmh67wa
@bmh67wa 3 года назад
They didn't come with a 351W in 1974. If these guys knew their stuff they would know that.
@B1Springfield
@B1Springfield 3 года назад
@@bmh67wa I figured that. Initially when I saw the 351 4v on the air cleaner I was thinking, oh man, they swapped in a 4v Cleveland in the restoration. Must’ve been a 302 truck originally
@jdpinbaytown
@jdpinbaytown 2 года назад
Yep, No 351W in Trucks till 1983
@frankgrimes6047
@frankgrimes6047 Год назад
@@jdpinbaytown nope, had a 77 f-100 with a 351w, truck would pass anything but a gas station. my bad, had a 351m.
@lestedabahia6121
@lestedabahia6121 3 года назад
Great Project. Watching Here In Brazil.
@gushaman
@gushaman 2 года назад
Truck: do not heat Truck Tech: ehhhhhhhhh 😁🔥
@deanwharepapa8561
@deanwharepapa8561 2 года назад
Very cool truck, awesome upgrades, I love it
@vorhese
@vorhese 3 года назад
My first vehicle, in 1990, bought when I was 14 :D
@ajpasa
@ajpasa 3 года назад
Great show!
@pangaute
@pangaute 3 года назад
Really enjoyed this, thanks
@marlobreding7402
@marlobreding7402 3 года назад
I'm surprised you didn't go with a Crown Vic front suspension since it pretty much fits without much modification. Way more options.
@BuzzLOLOL
@BuzzLOLOL 3 года назад
Use whole Crown Vic frame and drivetrain... or maybe Lincoln to get the correct wheelbase... and handling...
@josereyes4586
@josereyes4586 2 года назад
When he said "ouch" I felt that
@eaglethehulk8539
@eaglethehulk8539 Год назад
"I ain't seen anything yet but I am changing my guess to 75" had me rolling.
@bnmartell
@bnmartell 3 года назад
“Put it on the dyno and got an unimpressive 146hp at the rear wheels”. A stock engine was 156 at 4000. That’s not bad
@juhomaki-petaja
@juhomaki-petaja 3 года назад
Remember that those are from rear wheel. Engine power is about 175Hp
@chrismelcher9482
@chrismelcher9482 3 года назад
@@juhomaki-petaja they put $7,000 ( about$4,500 in the engine ). and only gained 17 lb ft !!! And it falls on its face after 4grand!! I don't see anything worth bragging about.
@juhomaki-petaja
@juhomaki-petaja 3 года назад
@@chrismelcher9482 I was talking about that ”baseline” engine
@chrismelcher9482
@chrismelcher9482 3 года назад
@@juhomaki-petaja yeah Ford definitely has more to reason brag than they do. PN usually does pretty good, not sure what happened on this one LMAO 😂.
@ShaunHensley
@ShaunHensley 3 года назад
2.3 ecoboost has more power
@ricardokim4870
@ricardokim4870 3 года назад
WONDER Designer
@ronniejohnson317
@ronniejohnson317 3 года назад
Pat, you need a Guyabera shirt. And I have built trucks from the ground and didn’t spend close to that. I built a 64 f100 cheap. The paint was the big expense (Imron uraflow). I took the arch springs out and flipped the them under. Stiff shocks. A junkyard 390 c6.
@opwarriorxp1863
@opwarriorxp1863 2 года назад
Finally someone used the track here
@gnfnrs1186
@gnfnrs1186 3 года назад
My favorite body ever. My first vehicle was a 78 f150 ranger
@backcountryme
@backcountryme 2 года назад
My first vehicle was a 74 F100 with a 390 and the XLT Ranger package. Man I loved that truck.
@backcountryme
@backcountryme Год назад
@jamesbell7949 yeah, mine was a short bed too. It had the tow package with the low gearing. It wasn’t fast, but it would pull a house down. Ha. I painted it midnight blue.
@JoeRocket-sf6qs
@JoeRocket-sf6qs 3 года назад
The parts ur taking off are like new and I need some of em ,send em my way😆I must say I would have removed the engine.that truck was rebuilt in the mid 90s so that bolt ceased in the bush in less than 25-26 years.no L.S have an original idea instead of doing what everyone else is.
@johnathonmcgee1123
@johnathonmcgee1123 3 года назад
they are throwing away gold :}
@JoeRocket-sf6qs
@JoeRocket-sf6qs 3 года назад
@@johnathonmcgee1123 that they are ,but my trucks almost done ,I bet swap meet is where those parts are headed.
@schwanzmunster2503
@schwanzmunster2503 3 года назад
Awesome truck! I am subscribed to LTs' channel that he has now. Also good stuff.
@chaleowin7732
@chaleowin7732 3 года назад
I had a 74 Bronco, that F-100 is sexy too.
@ChiefRickyRC
@ChiefRickyRC 2 года назад
I'd give anything for this 1974 red F100 😍👨‍🔧🏁🏆💘
@movaughn20
@movaughn20 3 года назад
Definatly looking up a sway bar set up. Curious whats out there to utilize stock cast I-beams on 70 stepside
@JimBascombe
@JimBascombe 5 месяцев назад
I have a 68 short box. And there aŕe are sway bar kits for the I-beams out there. Can't remember the company name that had the ones I got But they helped a lot with body roll.
@JoeZelensky
@JoeZelensky 2 года назад
Excellent choice of rockers. For the same price should have done ARP studs for the heads, a roller cam, and timing gears.
@chrissartain4430
@chrissartain4430 2 года назад
Good Job Guys!
@Slammy555
@Slammy555 Год назад
My uncle had a truck just like that. I think it was '72 and it was red+white but looked just like that. He loved that truck.EDIT: Looking at the pics it was a '74 Ranger.
@AirohThird
@AirohThird 3 года назад
I loved how you guys improved the truck and keept the clean original looks. She is a beauty.
@slimbo9744
@slimbo9744 2 года назад
A clean all original truck will be a thing of the past in some years to come. I like to see them modified but when there that nice i would leave them that way.
@CJColvin
@CJColvin 3 года назад
You guys could've done the crownvic swap as well.
@jackofalltrades4904
@jackofalltrades4904 3 года назад
Yes! please do a crown vic swap including engine and trans!
@chrismelcher9482
@chrismelcher9482 3 года назад
Have you seen what Tony and Lucky built on HotRod Garage?? I think it's called the Crown Hick lol. Pretty cool build.
@jaywill4395
@jaywill4395 2 года назад
The dyno guy really cares about sleeping well😁
@Ironwind1972
@Ironwind1972 2 года назад
What happened to 4 to 5 times the hp of the original engine? Forced induction? The combo you did use having an estimated 400hp?
@imranabbasi7871
@imranabbasi7871 3 года назад
Good luck 👍this is my favorite classic pickup truck 🛻
@chestercallahan8856
@chestercallahan8856 3 года назад
Best build show!
@ironhead2008
@ironhead2008 3 года назад
We had a blue and white '75 (I think) F100 when I was little. I still remember that truck. One of these days I'd like to hunt one down and hop it up (and I mean REALLY hop it up, with say a 460).
@BuzzLOLOL
@BuzzLOLOL 3 года назад
A stock Ford 400 will make good low budget power with TMI pistons and a mild Jegs cam...
@ironhead2008
@ironhead2008 3 года назад
I figured as much. I think it actually had a 400M now that you mention it. Either that or a 360FE.
@THROTTLEPOWER
@THROTTLEPOWER 3 года назад
Nice truck!!!!!!!!!! 👍👍👍
@agaragar21
@agaragar21 3 года назад
Nice JOB !
@alk3myst
@alk3myst Год назад
not crazy about the color they used on that I beam setup. glad it performed well. Truck looks good.
@markdubois4882
@markdubois4882 2 года назад
The 351 was NOT available in the F-series til 1977. the F series from 73 to 76 were using FE engines larger than the 302 and smaller than the 460 (360, 390).
@mohrass1
@mohrass1 2 года назад
You are correct!!
@dbeasleyphx
@dbeasleyphx 2 года назад
I don’t remember them saying it was the original engine. The truck was modified/updated when they bought it.
@motormatt302
@motormatt302 3 года назад
Awesome, gave me some great ideas for my 74 f100!
@solanaceae2069
@solanaceae2069 Год назад
Sweet truck.
@ruffcutford
@ruffcutford 2 года назад
This was great!
@shannonfamily
@shannonfamily Год назад
I feel bad saying it, I rarely feel this way BUT, I had a 75 in rougher shape and loved it dearly so seeing this in this condition makes my heart flutter and I would not change it. I am a restomod l9ver but this truck is too gorgeous to change. Except the Windsor but since that is rebuilt original I'd leave that too. Sorry guys, love power Nation and you still get thumbs up but I'm sad.
@willemp6432
@willemp6432 3 года назад
How cool is that...Nice and slammed. Now Jeremy can also get in and out.....😈
@olveramelinda
@olveramelinda 2 года назад
Big gains
@dimascuwk9071
@dimascuwk9071 2 года назад
I love the dwarf he's genius
@michaelzimmerman635
@michaelzimmerman635 2 года назад
Hillbilly Tyrion Lannister.
Далее
FULL BUILD: A 1,100 Horsepower 1972 Mercury Marquis
1:19:55
Full Build: Reinventing a 1964 Ford Flatbed Shop Truck
1:25:36
Full Build 1960 F100: From Flooded to Back on the Road
1:25:21