FX Airguns 180° Rotatable Transferport

Подписаться 24 тыс.

Просмотров 12 тыс.

50% 1

Showing and testing the new FX Airguns 180° rotatable transferport design .
As of now this transferport is only available in .22 caliber , later .25 cal will follow
Music credits :
Tropics by tubebackr / tubebackr
Creative Commons - Attribution-NoDerivs 3.0 Unported - CC BY-ND 3.0
Free Download / Stream: bit.ly/al-tropics
Music promoted by Audio Library • Tropics - tubebackr (N...

Опубликовано:

3 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 36

@patriciacristobal6977 4 года назад

You are the best communicator out there, keep on going like that. Thx.

@Airbuks 4 года назад

Thx 🙏🏻 I appreciate the support.

@larrycoleman2225 4 года назад

Certainly follows the KISS principle. Well Done FX... Thanks for sharing.

@jrlayneoliver 4 года назад

i watched this video when it came out. I had recently ordered a 700mm .22 FX Impact caliber change kit and had taken the transfer port off to upgrade to the Huma dual...anyway, going through my stuff and found the new transfer port was sent; I have the new setup. Thanks for the video because I would have never noticed that one...

@Airbuks 4 года назад

Nice 👍, the Huma is also great 😉

@FishHuntVanny 4 года назад

Wow.. Nice one barrel ☝😍🙏👍👍👍

@clgraham82 4 года назад

Strange I haven't seen this on the AGN forums yet...good review.

@ptescreen18 4 года назад

I made this for all my Fx rifles years ago , funny how they just come out now lol

@khamishusain 4 года назад

Hi , how did you made the notch in the brass end? 1mm drill bit can do that ?

@ptescreen18 4 года назад

Khamis Husain machine or dremmal works

@brocwavra8813 2 года назад

I have been looking for a video like this. I couldnt find one at all until now. I noticed on the video it looks really easy to rotate the barrel. Can you tell me what screws need to be loose to rotate it? Also the slug port or pellet port needs to be facing down correct ? Any other tips like should the gun be uncocked while performing this ?

@Airbuks 2 года назад

Hi , yes it’s very easy to rotate. What screws to loosen depends on FX Eagle you want to use it on . The port you want to use needs to face down 👍🏻 Very important is that when you perform any work on your gun it has to be safe and uncocked 😉

@brocwavra8813 2 года назад

@@Airbuks Thank you again.

@ridinrocks 4 года назад

Thats cool and all but what happens to the air consumption if you dont tweak the tune i would be in the mindset that it would just waste the air?

@Airbuks 4 года назад

The air consumption is even abit better , the smaller tp prevents the power plenum from draining before the valve shuts again and therefore safe some air

@ariamaguila8549 2 года назад

Is the fx maverick the same?

@Airbuks 2 года назад

Yes that should be the same 👍🏻

@Kevin-mi7qx Год назад

Hi, are these still available? If not could it be possible to drill a standard one?

@Airbuks Год назад

Yes it is , should still come standard on new guns

@Kevin-mi7qx Год назад

@@Airbuks Thanks, I'll have a look 😀

@ptescreen18 4 года назад

So for legality reasons in U.K. with sub12 users , does having the barrel flipped to sub12 side still make the gun completely legal ? As all it takes is a barrel flip and ur breaking the law , but then the using tools to modify power law comes into play and you need Allen keys to flip the barrel , very controversial subject

@Airbuks 4 года назад

I have no experience with sub 12 foot pounds UK laws 🤷‍♂️ sorry I cannot help you there

@TheHerald45 4 года назад

What about the air consumption, a big difference or not

@Airbuks 4 года назад

Didn’t test the whole shot string yet but I have the feeling you gain some shots . For best accuracy you probably have to make some what of a mixed tune

@gerardlong74 4 года назад

Where can I buy this and Can the port be purchased separately and retro fitted to an existing barrel?

@Airbuks 4 года назад

I got mine like this without asking , but I guess if you buy a .22 now you get it . If you ask your FX dealer they maybe can order it separate and then you can retro fit it without any problem 👍

@lachezardanchov7312 4 года назад

Is this available for Dreamline?

@Airbuks 4 года назад

In barrel sleeve and the liners are exactly the same , just the shroud is different. So I fits the Dreamline 👍 , I have it on my Dreamline now

@rhinenio 3 года назад

i have tried this with the power probe and get allot of blow back, can you help please

@Airbuks 3 года назад

🤔 make sure that there is a oring inside . Did you use the sleeve if it’s a 25cal

@rhinenio 3 года назад

@@Airbuks it is 22 and i have checked the oring. i will try again today thanks

@Airbuks 3 года назад

Maybe a silly question, are the orings on the outside of the tp in good shape / there ?

@ngirardo86 11 месяцев назад

My guess is your probe backed up a little allowing air to escape. It’s happened to me before.

@franciscocarvalho2424 4 года назад

Show à muito tempo sonho com a impact like

@uckhanhvlog7315 3 года назад

I cant by.

@Letskeepthingsreal 3 года назад

They do one in 360 degrees too, twice the price and just another way to scam money from you 😂🤣 I buy pellets to suit the gun, not pellet liners to suit pellets or slugs. FX, they must be laughing all the way to the bank.