This charger has everything you need to charge various RC batteries. Info: www.gt-rc.com/en/pd.jsp?id=377... If you want to see the main guidelines for the safe use of lipo batteries, check this out: • GT Power V6 Duo Charge...
Thank you for your feedback, the charger indeed has a lot of functions and battery information. But with the battery safe function, all settings are made very quickly and charging is very easy.
it's useless because every user manual say :"always keep an eye on battery while charging" If lipo battery is not damaged or abused, nothing bad could happen. i charged thousands of them without any problem but you have to stock them in a safe place when your eyes are not on them... (here come the good use of a lipo bag or lipo box)
Yes, I see it the same way as @trophythedrifter. The most important thing for me is to never leave a battery unattended while charging. If you don't, lipo bags are necessary. But be careful, even a good lipo safety bag can't provide 100% safety, so I think it's better to monitor them. 👍😊
Kannst du z.B. bei RC Mart bestellen oder auch Bangood. Habe auch schon einige Male von dort bestellt, klappt immer sehr gut. www.rcmart.com/g-t-power-td610-pro-100w-10a-ac-dc-touch-screen-battery-charger-discharger-uk-plug-gtp-td610-00080421
you can draw up to 3200w from an AC plug but this charger does not deliver more than 100W in only one battery pack... A modern charger should detect number of lipo cells by itself . Thank for this good review Matteo but this product is not à your level , even with this 4" touchscreen:-)
Thank you for your feedback! However, the wattage of a charger does not only depend on whether it is operated with AC. The more watts it has to deliver, the better and bigger electronic components have to be installed. And all chargers in this price category cannot deliver more than 100w. Chargers with 400 watts and more are much, much more expensive. And for normal use in cars and smaller airplanes 100w is enough. You can charge e.g. a 3s Lipo with 8A, that means a battery with 4000mAh is fully charged in 30 min.... And the function to backup the data of 8 of your most used batteries makes it very convenient to use, even if it doesn't recognize the cells itself. (If you try to start charging with wrong cell setting, the charger will give an error message). 👍😊
This charger is very very noisy when discharging. Fan is turning at full speed all the time. Internal temp is 21 degrees C. I am very dissapointed. And when using store discharge it takes ages. Last 0.2 volts its discharding 6 hours with 0.00A. Why?? I tested it with 6 different batteries. My old B6 charger is doing this job much better.