We Bought the New Universal Battery for All Tool Brands

Подписаться 384 тыс.

Просмотров 262 тыс.

50% 1

Testing Ceenr PDNation. Our lifetime worth of TOOL RANKINGS are updated weekly: torquetestchannel.etsy.com/li...
Craftsman drill: amzn.to/4dfi8jc Makita impact driver: amzn.to/3y2jhKU Go check out @PhillyFixed review • NEW UNIVERSAL Power To... review of these for some actual usage!
This week we were lucky enough to be able to purchase a PDNation universal power tool battery from Ceenr ahead of their "Early Bird" release and run it through its paces as we've been hearing a lot of chatter about this thing and its not even been out yet, so if they CAN make a dent in the strangle hold brands have in the power tool battery market, we want to be there to check it all out.
We're under no misunderstanding that being a channel like this gives us the opportunity to communicate and purchase one of these in the way that we have, but we're more than willing to provide feedback like shown here on the true limitations of a product so that it might be improved. We love the idea of a product like this and hope it becomes a real thing.
Part of the Makita's testing wad blocked by on screen graphics, see unedited testing result here: • Makita PDNation Test
~We may earn from purchases via the any links above~
As always, the creator of this channel works in product development for Astro Tools, always consider multiple sources when looking at a tool!
0:00 What is it
1:29 Charging & Pricing
2:51 Makita Impact Driver
3:51 Capacity
4:58 M18 High Torque
5:42 Drill Testing
9:44 Hiccups
10:42 Voltage sag
11:42 Inside & Chemicals
13:08 Bosch Saw
14:30 Dropping it
15:22 Thoughts

Авто/Мото

Опубликовано:

22 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 809

@TorqueTestChannel 20 дней назад

To answer a common question: It doesn't charge on your slide on charger. I don't believe there's a way for it to work on every brand that way, and they're trying to make it so you can buy X brand and not have to buy a kit. Just the cheaper bare tool each time and for the most part ignore proprietary things. Theoretically someone could eventually just start a tool collection only ever buying bare tools. But choosing A cheap slide on charger it could fast charge on I think would be a good idea.

@rileyh212 20 дней назад

Literally was in the comments about to ask if it would charge on XYZ charging systems. Thank you for addressing it in the comments.

@jlrockafella 20 дней назад

Awesome 👌 they need a fast charger

@pimpstick2 20 дней назад

Anybody looking for a great charger to go with it look up the "pinepower" by pine64, they also make a killer type c powered soldering iron you can power with the pinepower too ;)

@funkmon 20 дней назад

Thanks! I figured this. Can you check to see if the DeWalt adapter works on Bauer or Hercules? I hear some aftermarket ones are intercompatible.

@TorqueTestChannel 20 дней назад

@@funkmon Good question. It does not fit/work on Herc or Bauer

@davidpickard9393 20 дней назад

Batteries are the printer ink of power tool manufacturers

@robertdascoli949 20 дней назад

Oh geeze, they're going to put DRM in drills now, aren't they.

@thedownwardmachine 20 дней назад

@@robertdascoli949came here to say this. Retreating from the razor and blades model would be abandoning the one thing they learned in business school

@MathieuTechMoto 19 дней назад

Soon the tools will require Wifi to use them

@B0BBYGAMER 19 дней назад

They aren't that bad HP had their cartridges die by date even if they were not used imagine if you had to toss a fully working battery packs because it was on a shelf for a bit.

@perfectdiversion 19 дней назад

@@B0BBYGAMER I swear that already happens with milwaukee batteries.

@SpAm-AcCoUnT 20 дней назад

Shoutout tool companies installing a lil’ special port and chip on their specific batteries in about a year and a half

@F0XD1E 20 дней назад

I don't see that happening. It would cause too much trouble with existing batteries and tools in the field. This one company isn't going to cut into their margins by enough to warrant that.

@bobclarke5913 19 дней назад

@@F0XD1E On this generation. Next season "And to satisfy the demands of customers we're changing to a new platform of 25v tools" With serialization that would make HP and Apple jealous.

@reaperreaper5098 19 дней назад

@@F0XD1E Most companies already have the hardware in there, and in cases of products like DeWalt's Flexvolt Advantage, Ryobi HP, Milwaukee Fuel, Makita LXT and XGT, they have implemented battery detection at various levels.

@Miked1332 19 дней назад

Oh they definitely will. Hell, GE started putting RFID chips on their refrigerator filters just so you don't go and buy a knockoff that's 3x less. Milwaukee, DeWalt, Makita and so on, all make a LOT of money because of their battery platforms. You buy an expensive DeWalt battery and your more inclined to stay with DeWalt tools. If you bought a universal battery? You could buy any tool and that's just unacceptable for tool brands.

@dreadswizzard9142 19 дней назад

Apple did it with their charging cables so I don't see why they wouldn't do a small update to the communication between tool and battery so that it checks if it's an authentic battery.

@TorqueTestChannel 20 дней назад

Imagine a world where you don't need to wait 8 years for your color of tool brand to make a track saw, or the type of nailer you need, or your band wont make high performance batteries because they want to push you to their higher price line, or they start downgrading tools to place it better in their brand price ladder. Let's say your brand's mid torque impact is too long to fit where you commonly need it, instead of waiting years for a new generation you just go out and buy something a little shorter, maybe even at a better price. This is the beginning steps of something like that, and that's a world i want my children to grow up in lol :P

@BrokeLifeEU 20 дней назад

Does Ursula von der Leyen have a way to see this? I am sure she is a fan and can help with this in the EU!

@MrMartinSchou 20 дней назад

One of my biggest pet peeves is vendor lock-in. Batteries for power tools, ebikes etc., ink and toner cartridges for printers, pods for coffee makers, you name it. Yeah, I want to live in a world where you buy the best tool for the job (within your means) without having to worry if your existing batteries will work with it. Like - if you have only DeWalt tools, but DeWalt's version of the tool you need is worse than similar priced offerings from Makita, Bosch, Ryobi and Milwaukee, why should you have to buy the crappy DeWalt tool?

@fizzyl 20 дней назад

But then everything wouldn’t be color coordinated!

@pimpstick2 20 дней назад

What would be even cooler is if the battery was open source, nobody want's tooling specs or anything to reproduce it as that's their IP and costs a lot of money and absolutely protect your investment. Just take note how any right to repair friendly company's operate and model themselves are such. I feel like this is a big step in the right direction, but not the end goal that we truly need as consumers. If we can't repair this product then you truly don't own it and you're still buying e-waste in the end. This will cut down on a lot of e-waste but will still be e-waste it's self which is a sad concept that we still live in.

@TorqueTestChannel 20 дней назад

@@fizzyl At least they chose black. What color does black not go with?

@howa08 20 дней назад

I have to say, the USB C charger is a huge selling point. I like to leave a spare impact driver in my truck and being able to charge and maintain the battery without the big charger is amazinf

@mnFlatLander 20 дней назад

Absolutely this. Got a rim on my Highlander that likes to drop air pressure when the weather swings cold to warm or warm to cold. Keeping my little Ryobi inflator with a battery I can just charge off the vehicle would cut down on some clutter for me.

@Fekillix 20 дней назад

DeWalt has a USB C charger and power bank. Charge the battery via USB C, or charge your laptop from the battery as a power bank.

@liamobrien9451 19 дней назад

I'm not entirely sure about that for heavy professional use, for example running an angle grinder and a hammer drill on site, we'd be constantly draining batteries, so having to wait an hour for a new one to charge would be unusable

@practicalfrost5192 19 дней назад

Amazinf as guck.

@samlind8676 19 дней назад

@@practicalfrost5192😂😂😂

@jeramystephens74 20 дней назад

Drug dealer mentally is spot on. I have a garage full of Ryobi because I got a kit 20 years ago and never could bring my self to switch to another brand because of all the batteries I already have.😂

@swa5026 20 дней назад

That is the best thing with Ryobi. You can put new batteries in the old tools.

@jeramystephens74 20 дней назад

@@swa5026 Ryobi - keeping mediocre, underwhelming tools running for 40 years 🤘🏻

@Count_Smackula 20 дней назад

But for us, occasional, light use, home gamers it's still a win. 😁

@swa5026 20 дней назад

@@jeramystephens74 Personally I am more of a corded tool guy but the only cordless tool I use is a Ryobi drill from 20 years ago that works perfectly fine for drilling holes in wood.

@jeramystephens74 20 дней назад

@@Count_Smackula don't get me wrong. I'm not going to throw it away, but their impact wrenches are very lacking in the power department.

@MrMartinSchou 20 дней назад

USB-C (in the right revision) does support up to 240W power delivery. 48V at 5A

@TorqueTestChannel 20 дней назад

Dam son

@F0XD1E 20 дней назад

The chargers and cables that can deliver that kind of power are pretty expensive though.

@pimpstick2 20 дней назад

PD spec 3.1 for the 240W, type C is just a physical port and doesn't mean anything. It's the controller chip that the port is wired to that matters, so being type C doesn't mean anything other then it takes a type C cable until you know what chip is behind that port.

@luisinhoens90 19 дней назад

@@F0XD1E when you consider how much a fast charger from (insert your tool brand here) costs and how limited in functionality is, I guess the high power USB-C charger might give it a run for its money

@EnricoConca 19 дней назад

@@pimpstick2 There are minor suggested changes to type-C cables and receptacles to support the higher voltage of EPR (essentially a couple of pins being shortened to allow detection of a sudden cable removal to reduce the chance of arcing, given the higher voltage) but that's honestly nitpicking. USB-C is great.

@BrokeLifeEU 20 дней назад

The EU managed to put the USB-C on the iPhone. I can only hope among other regulations they come up with one for interchangeable batteries between tool brands. I buy mostly Parkside tools, because the batteries are cheap. And the price of the battery is the biggest obstacle to overcome for me as I am not a professional user by any means. I use tools at home, around the car and bike and to make the occasional low budget and low quality RU-vid video. So batteries sitting about doing nothing is not a good investment for me. So a Parkside 8Ah battery that works on a Milwaukee I would very much like. That said I am not a fan of the 3D printed adaptors. So go on EU take them on! P.S. It must be said that you have made another exceptional! Thank you!

@bleyz3557 20 дней назад

There is a risk that Parkside batteries are not as good as they seem. It would be cool to see some of the performance parkside tools tested first by TTC, then batteries themselves vs name brands. I'm just talking about performance of batteries not longevity cuz it's another story and that seems to not be a problem. Parkside seems to use cheap chinese cells inside so that would explain the cost of the battery at the shell. Even their 21700 4ah pack is most likely made out of cheep chinese 21700 cells.

@BrokeLifeEU 20 дней назад

@@bleyz3557 For sure Parkside batteries are nowhere near as good as say a Makita, DeWalt, Bosch. However if I could choose wether to spend more on a battery or tool I would spend on a tool. Simply because I look at the battery as a consumable so I would like a reliable tool and a cheap battery. This is by the way the view of someone who does not use these tools professionally as said in my previous comment. Of course not too cheap a battery but if it can do 95% of what a battery twice the price can do I will be more than satisfied.

@chipperkeithmgb 20 дней назад

Stuff the e u

@fulf 20 дней назад

From 2025 eu states (law) that all powertools from every brand should use the same battery. I like theire thinking but its bad in reality.

@joshuaking34 19 дней назад

@@fulf That was an April fools joke.

@FischerPrice74 20 дней назад

Im fully okay with this not liking VTEC impacts or saws if it works on impact drivers, drills, heat guns, or any variety of more "standard" power tool. Some things are built for the best, but not everything has to be. Charging with USB C is the dream and to not need a $100 add on kit to do so is sweet.

@jonathanshaw8868 20 дней назад

I was thinking the same thing, my milwaukee lights or vacuums don't need high output batteries to work.

@TheBrokenLife 20 дней назад

@@jonathanshaw8868 I have a Ryobi shop vac that very much wants the biggest battery I can throw at it. It's the most power hungry cordless tool I own. I'm curious about the Milwaukee counterpart you have.

@VacMaster1991 19 дней назад

@@TheBrokenLife I have a Milwaukee shop vac the 6 gallon one. It drains batteries like crazy! I'm lucky to get 10 minutes on a charge with an XC5.0. Even the 6.0 High Output struggles with it. Performance drops very fast you will only get full suction for maybe two minutes before it slows down. Strangely the best performance I have gotten from it us using an adapter and a Dewalt XR 8.0 pack.

@TheBrokenLife 19 дней назад

@@VacMaster1991 That sounds pretty bad... Mine is a 2 gallon (I think?). I use a 9aH high performance Ryobi battery in mine and the total run time is around 45 minutes. Performance is very good except for maybe the last 5 minutes or so. That said, I can run a chainsaw or weedeater longer on the same battery. That vacuum is hungry. Despite that, I quite like my vac. It's really nice dust with. 😂

@jonathanshaw8868 19 дней назад

@@TheBrokenLife I just have the little 2 gallon m18, on 6.0 batteries you only get 15 ish minutes, your really using it as sparingly as possible. But it works good for in field activities

@polaris6644 20 дней назад

The USB charging is a great idea. Being able to charge them on the way to a jobsite in a truck, or charge off generic cell phone portable chargers are not the most efficient ways to charge, but most definitely would be useful.

@GigsVT 20 дней назад

The lights staying on and draining the battery in a few days is an absolute dealbreaker.

@TorqueTestChannel 20 дней назад

Should take about 18-24 days. But I fully agree it's stupid

@gloriousapplebees 20 дней назад

@@TorqueTestChannel to be clear though this is only with an adapter on or on a tool? If it just sits in 'powerbank' mode will we be okay to leave it for weeks and not worry?

@TorqueTestChannel 20 дней назад

@@gloriousapplebees Correct, in power bank mode you could leave it for 6-10 months like most batteries.

@gloriousapplebees 20 дней назад

@@TorqueTestChannel Gotcha, still silly but that's easy enough to work around... as long as you remember LOL Thanks for all your work!

@stevebabiak6997 19 дней назад

@@TorqueTestChannel - was this drain true for all adapters, or just certain ones? My hunch is that the adapters might have some special electronics in them for some tool brands, but maybe not for others, and the power being drawn is running that bit of electronics. Just a hunch that could be completely wrong.

@gamerpaddy 20 дней назад

instead of them pricing them reasonably they probably pull the 14.4v ryobi and add a proprietary communication protocol thats encrypted most tools out there just need a 3.3v signal on the temperature pin to work, but a few require a data stream like all bosch ebike batteries that hasnt been hacked yet

@kmsdaily 20 дней назад

Insane we live in a world where batteries are encrypted...

@palololol 20 дней назад

@@kmsdaily” *safety* ” - Bosch

@mrb3888 20 дней назад

Not to mention, there’s a channel on here (can’t remember the name at the moment) that’s already intercepted the data stream from m18 batteries and the charger. And was able to dump the protocol.

@stevebabiak6997 19 дней назад

@@mrb3888 - you are thinking of Tool Scientist.

@georgelin8498 19 дней назад

@@kmsdailyapple has been doing this with their batteries for years

@Tool_Addicted_Carpenter 20 дней назад

Batteries are so inflated and we see this through kit prices, sales, and what harbor freight sells their 12.0s for. Not long ago home depot had 3 12.0s for $400 and even more recently they had a 12.0 + two 3.0s for $200. Home depot also had a sale on their 60v tools that came with a 'free' 9.0 battery. They would never take a loss on their sales so all of this tells us that their regular prices could simply sit lower. I've already been running adapters for ~10 years though so I'm not sold on these as a completely new concept. I think they need to round those corners and potentially wrap in rubber for durability. Another big thing would be to make the adapters work for charging the batteries on name brand chargers because a hour+40 mins on a 4.0 is not feasible in the field. Overall, I like the direction they're going with this. Thanks for the video sir.

@reignreincarnation5531 19 дней назад

you got to get bunches of battery packs then but lugging those is a pain in arse. in freaking hot sunny days, the pack will heat up faster and reduce the time usage quite considerably. My 4.0Ah battery that should've last 40-45min went off just less than 30min on a hot day.

@tankmlee 20 дней назад

i like to buy used tools from goodwills and stuff, this is a HUGE thing for me, i can stop worrying about the cost of a missing battery

@RainbowGin 20 дней назад

For a second I thought this was April fools. But now that I'm seeing it I'd love to get a 6-8ah from this brand and a Milwaukee adapter.

@TorqueTestChannel 20 дней назад

The Milwaukee adapter is there, but I agree - 8Ah or bust!

@mromutt 17 дней назад

The biggest batteries I have are 4ah but I have many brands of tools, I just cant bring myself to pay the big battery price. But with something like this I could justify the cost if I could use it across multiple tools. I would even be willing to get a jumbo belt battery from them like the backpack battery haha

@refactorear 20 дней назад

Oh, neat, yesterday I saw this at Dean's channel and they looked cool but was waiting for a more in-depth view, thanks! I just hope it is not just like the xkcd "Standards" comic. And I'm afraid this won't make makers lower their prices but instead adding more security features, fuses or stuff to detect whether the battery is original or not and not draw enough power when a knock-off is detected.

@toolscientist 19 дней назад

14:10 there's definitely no throttling. Throttling requires linear mosfets, which are big, expensive, and make a lot of heat. Their mosfets are either fully on or fully off. 11:34 this test shows that the CEENR has higher resistance than the Bosch or Dewalt, despite having lower resistance cells. They've clearly using cheap mosfets with high resistance. If it's losing 1V extra at 37A, that means it has an extra 27mOhm of resistance, which is quite bad. Looks like they're using 4 mosfets and 2 shunts at 12:01 (shame about the focus). Makita LXT packs can do stand-alone cutoff just like these packs, but they have a high-end mosfet of only 0.45mOhm and a pair of shunts with 0.25mOhm resistance. Those packs can handle 110A before the pack cuts out from hitting 12.5V - so 1,250 Watts. M18 12Ah also have high-powered mosfets and I've taken them up to 160A and 2,500 Watts. Powerstack 5Ah also has cutoff mosfets and can easily go over 630 Watts. So this is just showing that you get what you pay for. Cheap batteries = cheap parts and the associated compromises.

@TorqueTestChannel 19 дней назад

That does make a lot of sense. Thanks!

@scottboyce 16 дней назад

Thanks for chiming in!

@squarrl 19 дней назад

This is just going to cause tool manufactures to add a handshake to the battery, I am kinda surprised it has not happened yet.

@reignreincarnation5531 19 дней назад

it'll be bad as i made my own battery packs now..sighh

@rolandm9750 18 дней назад

They kind of do, but not fully. First off a lot of tools need the temp sensor to operate, of which most battery adapters just spoof it via a static resistance and that lets the tool work. However the danger there is the tool doesn't know the actual temperature of the battery if you just put in a static median value. Secondly a lot of higher-perf. tools have some add'l "communication" with the battery--e.g. Milwaukee RedLink, Ryobi HP, etc. which is not needed to run the tool but sometimes is needed for peak performance. These are typically "simple" protocols but would have to be reverse engineered, etc. and wouldn't be within the realm of a basic adapter. So not really handshaking but a few perhaps minor caveats to using anything "universal" via simple adapters.

@Layneracer 19 дней назад

Batteries are becoming so expensive that it inspired me to learn about battery chemistry and electronics repair so I could Re-cell and repair M12 batteries for myself and coworkers. Why spend about $200 on batteries when I could put that money into a cheap spot welder, a nice soldering iron and like 20 high quality Samsung cells? The tools are buy once cry once and now I can repair my own stuff for a fraction of the price of instead of shelling out $60 for like $9 of lithium cells in a red flavoured plastic shell.

@SoulcatcherLucario 9 дней назад

do not solder lithium cells as you may start a fire that is really damn hard to put out. get a welder, it'll be so much safer

@ABoringTool 20 дней назад

PD nation should add a turbo switch which allows full draw with the caveat that some tools might break

@TorqueTestChannel 20 дней назад

We'd tape the button down! haha

@bigqwertycat 3 дня назад

You're talking about the same consumers that allow channels like "Just Rolled In" to thrive. Not a good idea to have your product potentially breaking a customers hundred dollar tool.

@mondavou9408 14 дней назад

I LOVE any company trying to solve problems / provide solutions to people! Bonus points if you're also making it difficult for predatory companies at the same time.

@F0XD1E 20 дней назад

Looks great. They should fix the lights always on drain and if the price is right it could be a game changer. I don't mind if the charging is on the slow side since I'm not a professional.

@ianbaker4295 19 дней назад

This newcomer has got the right idea. They already have a good product, with the potential to be an amazing product, if they iron a few things out and consider the feedback from their customers. Down the line, they could easily up the charging wattage to 65 or 100 watts; technically, they could go up to 240, but that would be harder to accomplish. I approve, let us pull a few more amps from those spicy cells though please!

@TurboDog73TX 19 дней назад

This is awesome. I REALLY do hope this takes off and sends the message that needs to be sent to the manufacturers of tools.

@ralanham76 17 дней назад

This is the most valuable video I've watched in a while. 👍 I mean a lot of times at work it's cheaper to buy a kit with a tool, charger and 2 batteries, than a single battery.

@DumbSkippy 18 дней назад

Kudos on a magnificent video. Unbiased, candid, with specs, facts and figures. Props to Ceenr PDNation for trying to break the industry vendor lock in.

@beemer567 19 дней назад

impressed to see all the measuring devices you've added since last i tuned in

@FC_Dobbs48 7 дней назад

Genuinely informative! Great episode from a reliable channel.

@timothycooney986 19 дней назад

Your channel is invaluable - arms your viewers with great information. Tabulated tool ranking is great. Thank you.

@getyerspn 20 дней назад

Looks like a good idea for diy'ers but for me I love the 15-20min charge time on my Makita 18v 4ah batteries ... By the time I run one down the other is fully charged. If only the blooming batteries didn't cost an arm and a leg.

@MemelordSupreme 16 дней назад

With an appropriate charger it should charge just as fast. In the video he was using a laptop charger for some weird reason. Only thing that sucks about rapid charge is it severely degrades the batteries overtime.

@Patricksmancave 19 дней назад

Love that there is is a new battery our there. Nice to have a new option. Like that now that I am not stuck with Ryobi battery now! Thank you for the video! Have a great weekend!

@MrExplorerFilms 19 дней назад

For a couple of projects I've just bought a $10 battery adapter online so I can use my rigid batteries with cordless harbor freight tools. Seems to work fine although the voltage is slightly different.

@podocrypto6072 20 дней назад

My new favorite tool channel! Great job on ALL your videos as a whole!!! But about the Ceenr PDNation Universal Battery.... You can't order them for some reason.

@ChefBoyarDEEZ 18 дней назад

I recently picked up the Craftsman CMCD721B Brushless hammerdrill (USA Made) and man I've been impressed with it. It's a beast. I've been quite surprised and impressed with all my Craftsman powertools. Really like em.

@diemos322jones9 19 дней назад

Companies have already been making the adapters for years. I have a craftsman leaf blower and weed-eater, all of my tools are dewalt. I bought an adapter because the 2amh battery that came with the blower are trash. It was $20-25 on Amazon and they have them for every platform.

@gwall1789 18 дней назад

Same here. I run a DeWalt 10Ah on my Craftsman leaf blower. Huge difference. I also noticed the bigger batteries help balance the weed whackers better.

@fattygamer94 15 дней назад

Sure you, can get certain DeWalt to other brand adapters, but you have to keep finding adapter if you get a random tool from another company. But this is like a "universal" battery. One 5AH battery is $50 bucks. That's almost $50 less than say a Milwaukee battery. So for $100 bucks you could get two batteries with two tool adapters. Then say you get one random tool, for $20 you get an adapter. Also they could keep adding more brand adapters even like HF brands Bauer and Hercules or higher end ones like FES TOOLS. No need for battery specific chargers either. Once they work out the kinks, this ideal of a universal battery could change things for the consumers

@HorizonMakes 20 дней назад

The charging solution is really half baked in my opinion. I feel like this really wouldn't work for many people, having to plug the battery in is a bit fiddly compared to just popping it on a charger. If they come out with their own charger and keep the usb c port (that way you can use either of them) then it can still be considered not locked-down while having the convenience of a standard tool battery charger.

@TorqueTestChannel 20 дней назад

Smart, i like it

@pimpstick2 20 дней назад

How is plugging a type c cable into something more fiddly then trying to get it into the rails of a big bulky charger? It just sounds like "Old man yells at cloud about how he fears change" kinda thing. Type C is so universal that there is no need to make big bulky wastes of plastic and space.

@nicfab1 20 дней назад

@@pimpstick2big clunky plastic rails with big clunky contacts have a purpose when you wear big clunky gloves and are in a potentially dusty environment that could easily clog up a usb c port

@HorizonMakes 19 дней назад

@@pimpstick2 I find that plugging in my phone takes much more dexterity compared to charging my makita batteries. To plug in my phone I have to fiddle a bit with a tiny connector, while to charge a makita battery I essentially just throw it on the charger with a kinda-right orientation and the rails line everything up. as nicfab1 said, there's a reason chargers are designed like that, and the abuse things in a workshop need to withstand is much greater than the abuse things in consumer environments need to withstand. I absolutely love usb c, don't get me wrong, it's just not the correct choice for the job IMO.

@theodorgiosan2570 16 дней назад

@@nicfab1The regular chargers also can clog with dust. Either way I have compressed air piped everywhere including up to and in the kitchen and out in the driveway. I can just connect a blow gun and blow out the port. Not a big deal. I lose the tool chargers all the time but I have millions of type C chargers and can get more for $1.

@bratling 20 дней назад

Really great test information and analysis - thank you!

@ThriftyToolShed 20 дней назад

Awesome! I really like the PD nation idea. As an initial roll out it seems really good. I believe they will have it working great even at high current demands in no time at all. It's not easy developing all that. I have considered it to some level myself in the past. I wish them the best with this! Excellent testing TTC!

@toolscientist 19 дней назад

Looks like they've skimped on the cutoff mosfets, unfortunately. From the load test we see the CEENR losing an extra 1V compared to Bosch/Dewalt - that means it's got an extra 27mOhm of resistance. LXT 5 & 6Ah, M18 12Ah, Powerstack 5Ah, and then all Ridgid/AEG and Ryobi have cutoff mosfets, and they can all easily do more than 50A. You can see a blurry boardshot at 12:01. Looks like it goes B- > 2x shunts > 4x mosfets > P-. There's also a really big inductor, capacitors, and another pair of mosfets, which I guess is a buck/boost circuit for the USB-PD.

@KosmicHRTRacingTeam 20 дней назад

I’ve seen ads for this lately, but I thought they were just fake garbage like Temu type stuff. This is genius. If they can get it perfected, this would be be pretty dang cool. Too bad I already have about 12 dewalt batteries, 8 kobalt batteries, 5 Metabo batteries, 6 Milwaukee batteries, 10 Ryobi batteries, 4 Worx batteries 😡

@TorqueTestChannel 20 дней назад

Damn, you're going to turn into us if you're not careful!

@cpftank09 19 дней назад

This is pretty awesome! I’m guessing this 4ah is a proof of concept to see if it’d sell and will probably be making a larger pack in the near future. It’s a promising system!

@MysteriousSystems 19 дней назад

i love this. i already used one tool brand of batteries on all of my 18-20v tools with adapters, and my 12v stuff being the exception. love to see it!

@QuestWilliams 20 дней назад

I remember DMing yall this. So glad to see a video on it.

@e.tylerwright3483 20 дней назад

Sadly you can't find these batteries anywhere. Sold out. I'm sure stocks will come back up. HOWEVER I'm sure manufacturers will make it so only their tool works with their battery.

@TorqueTestChannel 20 дней назад

They're technically not on sale yet. We bought one early directly from Ceenr by emailing them asking to

@hybridt 20 дней назад

You guys make the difference when it comes to the power tool industry. That being said this battery could be a game changer if enough of them make it out there and those running the company stick to the values of universal usage. Being often I've wanted a single tool from a brand that isn't dewalt(workuse) or ryobi(for outdoor)

@jerrylondon2388 19 дней назад

I am standardized on deWalt 20v, I buy an adapter for each tool to make life simpler usually for Ryobi or 18v deWalt. $20 per adapter makes it a no go for me. The batteries would have to be cheaper or more capacity for me to switch. There doesn't appear to be an advantage unless I was starting from scratch on batteries.

@realandrewhatfield 20 дней назад

Maybe a switch or button on the battery where you can put it into Hi/Low. I imagine Hi will reduce the life of the battery as well, but for tougher jobs might be nice. Something like that starts to make the battery 'complicated' for some, but might attract others who want to be able to extend the life of the battery vs maxing it out all the time.

@SullySadface 19 дней назад

Really, no ryobi? Some of us have to work with our means here

@jimyeats 2 дня назад

Ryobi’s batteries are pretty cheap and often on sale. I wouldn’t be surprised if they didn’t feel an adapter was worth it.

@jeremytoms5163 17 дней назад

I love this idea. Hope it’s successful everywhere . I had a 12v combo set . Not brilliant but handy. Batteries died, could I find a new battery pack? Heck no! It’s been discontinued so would need to buy a new combo set, or? I bought adapters for the Black and Decker 14v batteries and fitted those. What a hassle! It was only because the little set has proven to be handy to have in the back of the van that I bothered. I’ve used B&D professionally for years now on site, my theft rate has dropped to virtually zero yet the tools have done all I’ve asked over the years. The combo set now works on the B&D batteries better than ever. But if universal batteries were available it would save so much trouble and so much e-waste. Especially when you quite often find your favourite tool on sale ,with battery, for less than the cost of a new battery. Promo’s like that are great for us but just generates even more e-waste.

@envisionCamusa 20 дней назад

My old C3 style Craftsman impact & drill (2K era) are jealous of all your newfangled fancy batteries. I'll just keep what has never failed me. But honestly they work so well that there's no reason to replace them.

@erwinslootweg7938 19 дней назад

i recently learned the EU is actually drafting new laws to force a universal powertool battery connection. same as they did with usb-c for phones...

@VexingVelvet 18 дней назад

Amazing work on this, this video is really impressive!

@a-k-jun-1 17 дней назад

Been doing this for years with battery adapters from Amazon. I use dewalt 20v batteries on all brands of cordless 18/20v tools. Works great when you're scouring yard sales

@Gooberslot 19 дней назад

I love this! I hope they add more brand compatibility.

@Kallandras 17 дней назад

One of the reasons I went with Kobalt back in 2016, was the (now discontinued) $19.99, 1.5Ah battery, even though I never bought one, and never got one in a kit. Even at $29, the 2.0Ah is still a good/great value.

@jcooper702 20 дней назад

Great content, and very informative!

@charmio 8 дней назад

Fantastic! The only thing I don't like about it is the sharp corners. Easy fix with some table corner protectors though.

@nominalvelocity 20 дней назад

It's a great ideaThis would definitely help convince me to try different brands of tools / use a brand that excels in one area but doesn't represent well in others.

@aaronmoore3050 19 дней назад

I have talen the attitude of "buy the tool, wait for a cheap battery". I am still waiting for a deal or good aftermarket xgt battery and charger for my xgt drill. My old drill is still working fine.

@scotts4125 20 дней назад

I'm on the Makita platform but have some Milwaukee tools as well. I really wanted the Milwaukee 18v vacuum. I have the Makita to Milwaukee battery adapter. I also had the stalling or not starting issue. It would work once but in order to use it again I had to remove and reinstall the battery. I took it back and just bought the Makita vac which ended up being fine. If you guys have a Milwaukee 18v vac you you test it please?

@Fridelain 14 дней назад

A slower charge is great for increasing the longevity oc a battery. Fast charging wears them down faster. Another thing that helps is keeping them refrigerated while charging. Something like a small desk fan works wonders.

@RandomGreymane 19 дней назад

Nice to see someone ran with this idea. I have two generic adapters to run my older Dewalt drill and my Dyson hand vac off my M18 batteries. So the idea has some merit.

@jaredm450 19 дней назад

This is pretty cool. I'm a weirdo with cordless tools from more than a half-dozen brands. I'm not loyal nor am I above using an adapter when the batteries I have for each brand are drained and there's perfectly good ones, in a variety of colors, sitting on my shelf waiting to be used. I don't need more batteries, but I might buy one or two just because!

@jac25412 17 дней назад

Northern tool just released their klutch brand drills and impacts. Time for a review. Very reasonably priced

@EXTREMOZAU 19 дней назад

Thenk you fir the video i appreciate all your hard work It is a awesome product ,especially for pros wher batteries cost more , not all types of tolls are made by one brand and die often for home users not so much ,but overall a very god product usb c is a god sent

@burtbak-jv9go 19 дней назад

i use two wire connectors using spade connectors, positive and negative and i use them to connect different make batteries to my drills, they work fine, a little adjustment is needed

@douglasreid699 19 дней назад

i can see this being good for a diy person, someone that has collected different older tools over the years with the batteries dying on them, this would be really useful that they can still use the tools without spending lots on buying new battries for different brands. and being a diy person, you dont need the max the tool can provide, usually you just need it to work to complete the job as doing work for themselves.

@BSevenly 20 дней назад

Test the Klein Tools impact driver and impact wrenches! would be cool to see how they stack up!

@wim0104 19 дней назад

they're just middle of the road DeWalt's

@BSevenly 19 дней назад

@@wim0104 Still would like to see Torque Test Channel talk about them and review it with some thoughts! big Klein fan here so would make me happy!

@freedomofmotion 20 дней назад

Keep a spare on a belt clip if you do trigger a reset situation plug it into the spare via usb c to c for a quick reset. I assume bi -directional connection. Also, they need to make 8 AH versions.

@TheJensss 20 дней назад

This is awesome! Now we are just missing these batteries sold as a DIY kit and in different sizes so we can build and customize the batteries ourselves

@nickstarks22 19 дней назад

Imagine if someone standardized a high amp output cord style for the electric generators that have become very popular. Similar to the one you Frankensteined for dewalt or the Makita one, but instead of using 4 tool batteries you can just use the 1024Wh EcoFlow or Anker battery with an adapter to fit your tool brand. Plug back in to ac to charge at 1500-1800 watts and in an hour and a half have a fully charged battery that can also power other ac devices and charge your phone with.

@thebigdoghimself 20 дней назад

I still have some old Hitachi 18v tools that batteries are hard to get. Hopefully, they will make an adapter for them.

@drshadowfan96 20 дней назад

How old? Do the metabo hpt batteries fit

@jimsmith556 16 дней назад

Sounds like a wonderful world where we can choose cross brand tools that are more suited to your needs. One question would be the longevity and charge cycles they can endure. My Nikon camera batteries work fine after multiple camera generations and charges. But off brand ones fail to charge fully after 6 months to a year. My original Makita batteries from a kit I bought about 15 years ago still charge and work like the day I got them. Hopefully the PDNation and other universal batteries can maintain the amazing charge cycles and durability of the OEM ones.

@brucey5585 19 дней назад

Good for low draw tools. The big tools draw way more amps, so the bms cutoff will turn off your battery to save it.

@user-nm5ue9hw9e 19 дней назад

Хороший тест. Наконец то кто-то выпустил универсальную батарею, хоть и не идеальную.

@andyruse4670 20 дней назад

I’ll have to keep an eye on it. I just wish they listed parts numbers for the batteries it worked as a replacement for. I’ve still got some ancient 18v black and decker tools as well as dewalt tools, and nobody makes the official batteries for them anymore. Hope they add an adapter for the dewalt 18v tall batteries.

@gwall1789 19 дней назад

You can get a genuine DeWalt adapter for $35 that lets you use 20v DeWalt batteries.

@ps.2 7 дней назад

Worth mentioning that in the low-end drill comparison chart (6:03), only *some* of those models are advertised as brushless motors. If that's not important to you, you can get the Craftsman CMCD700C1 instead for significantly cheaper. Not that I'd recommend that.

@jonathanshaw8868 20 дней назад

If I'm not mistaken milwaukee and dewalt tools cut out if a certain voltage threshold is reached to protect against over discharging the batteries...???

@stevebabiak6997 19 дней назад

That should be the behavior for all brands when their tool and their battery are used together. When mixing brands together that might not be the case.

@blakelawrence9699 14 дней назад

id love to see a test of different socket wrenches, measuring backdrag force, backlash distance, and max torque till failure. it would take some new equipment but i think it would yield some very helpful results.

@robertdascoli949 20 дней назад

2:55 I also love the Makita 19Z. I don't care if it drives a 3/8 lag bolt 2 seconds slower than the Milwaukee. It's smooth as silk and the trigger is absolutely perfect.

@ulle500 19 дней назад

I feel like while makita usually isn't the fastest or most powerful, the ergonomics are better

@KeterMalkuth 18 дней назад

@@ulle500 Electricians seem to really like Makita for that reason. As usual, different trades have different needs, and what brand is best for one trade isn't necessarily best for another.

@dragonmaster391 19 дней назад

USB C sells product! on electronics if it can't charge through usb c, it's pretty much a deal breaker. being able to charge a device readily and simply is a huge deal. considering usb c can charge at 100w, it's surprising companies haven't thought to offer usb c chargers. m12 batteries have a micro b charger that also provides 12v out and a USB port. if they replaced the micro b with a type c port that can send and receive power, it would be worth getting one. I might need to check someone hasn't made anything aftermarket yet. I'd never imagine Craftsman would beat DCK!

@scottboyce 16 дней назад

Dewalt has a 100w in/out USB C adapter. I wish other brands did too, like Bosch or Makita. They only have 5-12w USB-A out adapters (cannot charge battery).

@noahlehman1408 19 дней назад

Great content as always, do you guys ever plan on testing the DCD708 from DeWalt? I picked it up at a good price and has been doing me good at work, just wondering how it compares to others

@mixpick138 17 дней назад

Great Vid! I'm sick of being held hostage to the brand battery price points so every now and again I'll try a knock off just to test the water --that's why I'm super interested in this series that you are doing. I've found no joy until recently I'm trying a couple of "TENMOER" 18v jobs that claim 9 Ah (which is total BS) but the upside is that they do seem to perform sorta' like a 5 Ah brand bat with some strange hiccups. Haven't had 'em long enough to see how long they last but I've run them hard (mostly on angle grinders) since Jan and they still charge and run the tools decently. When one of 'em dies I'll chop it open and see what's under the hood. Dunno' if you are looking for brands to try but these are better than any other knock off's/reasonably priced batts I've tried (they are chineseeum batts so the name of them has probably changed as of this writing lol). With the ones you just tested, I do like the idea of just needing a USB C charger cable, but I usually use the brand chargers just because of their speed (and I have a bunch of them). Great stuff nonetheless and thanks for sharing!!

@harkbelial 19 дней назад

That's the design, nice and square like in 80's I approve of that. Beautiful!!!

@alexskywalker888 19 дней назад

I've got the "made in USA" Craftsman top end hammer drill and 3/8 impact. Good to know that there is most likely large amounts of power to be gained by going with this battery and I could keep it for future brand changes.

@gwall1789 19 дней назад

The Craftsman 4ah put out more power and Lowes just had them on sale for $39/ea.

@sswwooppee 20 дней назад

News you can use. Great video!

@Mixwell1983 18 дней назад

It's cool but for me I have mainly ridgids platform so what ive done is bought a Ridgid to Ryobi and M18 adapters on some good bare tool finds. The adapters were like $18 and i can run M18 and Ryobi with my Ridgid batteries. IF i find a good DeWalt bare tool deal ill simply grab an adapter for that. Cheaper option IMO than this since you already have the batteries of whatever platform you're primarily on.

@tysenp8193 19 дней назад

I'm really hoping this brand takes off.

@tyson822 13 дней назад

Thanks for the geat video! Have you ever tested any of the knock off brand tool battery in inverters available in Ebay and Amazon? Id love to see what you think of them

@datsun4x 20 дней назад

Im wondering if the sag is being caused by either wiring or component connections inside the battery. It would be interesting to see a heat gun reading on the battery after heavy amp draw vs. OEM.

@stevebabiak6997 19 дней назад

Could be the BMS, if to save on cost they used higher on resistance MOSFETs that cost less.

@ColdDoomOfficial 19 дней назад

It would be so cool if you featured one of the Klein impacts in a video, if I remember right they have a driver, compact, high torque, and 7/16" hex high torque, and take dewalt batteries so you could probably give it some serious beans

@speedstrn 14 дней назад

Might be time to update the Bauer drill in the charts. They now have the brushless 2191CR-B for $40.

@justincarawan-carawanco.pu1639 17 дней назад

I soooooooooo hope this becomes available soon. I have a NEWONE brand cordless drill and one of the two batteries that came with it has died. The worst part: their polarity is switched, making it even harder to find a replacement battery outside of the Chinese manufacturer.

@markmills344 19 дней назад

I'm happy to see this. I would actually PAY MORE for a high quality battery system that "breaks the chains" of having to stick with a particular tool brand.

@andrewt9204 19 дней назад

Looks pretty well implemented and nice they're using quality cells. If I didn't have a handful of dewalt and milwaukee batteries already, I'd be interested.

@DigitalIP 19 дней назад

As someone that Primarily uses Craftsman tools this is an extremely nice option.

@Alcorelli1 18 дней назад

Excellent! Now I can buy any tool I want and not worry about my battery platform!

@andrewcain1512 18 дней назад

Thanks for another great video

@vwal22 19 дней назад

I know it may be redundant since you have tested battery vs corded tools multiple times (including recently) but I’m curious to see how the corded A/C adapters that slide into the battery connection compare to the various battery sizes. Are they good enough to get you by in a pinch if by some fluke all your batteries are dead and you want to keep working while you’re charging 🤷🏻‍♂️

@frankiew8532 16 дней назад

I bought battery converters for my Bosch batteries to use other brand tools, for about $10 each from Alibaba. Now I can buy tools separate from batteries.

@Mr.Blue987 18 дней назад

Nice to see my favorite Craftsman drill getting some recognition.

@kraut-performance 20 дней назад

I would love to see a test of the two ZKH impact wrenches. Compared to Milwaukee stubbys and Midtorque and also maybe dewalt or other stuff. The small 380Nm rated impact wrench is called ZKH ZIW400. I don't know the name of the bigger mid torque wrench. This would be a dream. This tools are around 130-200€. And they look relative professionell instead some other China brands. Please do a test of these. ❤