Gas powered T-post driver and T-post installation 

6:40 Securing the pile striker is the part many do wrong and then complain the striker falls out, thanks for walking through it!

Thanks for posting this product unboxing. I bought a Jackhammer variant of the product. Clearly the same manufacturer including the toolkit and "professional grease". The manual did not include any information on placement the impact hammer cap. Your video showed me to drive it on with the knurled bar. I too am trying protecting an new orchard. Much appreciated.

I just bought one of these. Gonna install some fence this week. Mine also has the jackhammer bits and attachments. Nice job on the video! Very informative!

That is pretty slick there. Not too much of an investment if you got a ton of tpost to put in the ground and something you will use more than once if you have a farm. Wish I had that when I was a teenager. My dad had me drive a many of them things in the ground.

Mr. Pete, I do a lot of this kind of work. I purchases a yellow scaffold from tractor supply and welded steel channel to the bottom, so I can slide my tractor bucket forks into the channel making a lift. Works great for this kind of work. Good luck John

Thank You for your review. DIY had it at $ 308.99 today with a 5% coupon. Just Picked up one "2 Stroke 32.7cc Gas T Post Gasoline Petrol Post Driver EPA Certification" on eBay with a $25 coupon (Labor day) and it came out to $241.99. Hope it works as well as yours.:)

Just got mine from Home Depot. On sale $299 and came in an injection molded carry case with wheels! My directions say mix 50-1 oil mix. Thanks for the demo. Bought a small horse ranch 11.3 acres and a lot of the primitive fencing and T-rails need to be reset.

I just bought the model that includes the jack hammer. Thanks for the demo.

Great video. I have chickens with a chicken run that is 36x36 but I like them to free range. I need to install a fence of a larger area to keep coyotes out. I am going to install a wire fence and hot wire the fence to keep them out. This is the answer to my prayers. I didn't want to drive all those stakes by hand. I'll be ordering one soon. Thank you for the video and all the tips. outstanding job.

Thanks for the video it was very informative Now i know how to use one. And your microphone was great most videos the mic is spotty at best

It worked good. Your work looks great.

Looks like it worked out good!

I like your videos and am learning a lot from you. hopefully in the future I'll have property to grow my organic vegetables, fruits and flowers. By the way I subscribed. : )

Some 2x12's and a half sheet of plywood on the old pickup truck could replace the ladder/suicide stick. You could hold the backside down with a cooler of beer.

With a taller ladder there's no stopping Pete! I have seen the kind that hooks to a Bob Cat but it's not like you are doing that for a living.

I could see this turning into a comedy video where it says guy falls off ladder hit in groin with T post driver LOL good job as always buddy

I recently bought the same driver and it calls for 25:1 fuel mixture. Have used it very little but it seems to run fine with that mixture.

just bought the same one on EBay for $241, no tax, no shipping charge. the vendor is acarmotoring.

It tells you a lot when a spare plug is provided… I bet this thing will not want to start and flood itself like crazy or not run properly . Can’t wait to see what is going to happen

Those are some serious t-posts for that Jurassic park style t-rex fence there haha. Neat tool though.

Climbing up and down that ladder is too much for me. I rode in the back of my pickup while my wife drove down the side of the fence and stopped at each post. Drove in 75 posts in less than an hour. No ladder, no climbing up and down 75 times.

I deal with a lot of rocky ground and packed. I saw one by Rhino and it drove it in the ground like it was butter. But the Rhino starts at $1800. I do live on a ranch which just went thru a wildfire and now have to replace a whole bunch of posts so I need something that will eventually drive a couple of thousand posts.

Glad to see one working. When I looked at them on ebay some of the driver info stated not for hard driving. I got gun shy. Did it hold up for the 72? Thanks for the video.

I'm wondering if the pneumatic T post driver has enough go to split wood

i run 32:1 ration and have never had a problem with any of my 2 strokes.

Pete...I just used the Piling Driver today, thanks to your recommendation!! Works like a charm! I have a question for you. Did you have a difficult time removing the inner piling socket? I’m having a doozy of a time getting it out🤨. Any suggestions?

I found my answe to my previous questions, thanks! What I am thinking of doing is replacing a wooden privacy fence my late fiance' had installed back in 2006 and one of the 2X4 post has broken at the ground, set in cement, so I am trying to figure how to fix it, or support that post w/T posts on each side for support OR replace the whole fence? It runs about 25 ft down one side, my neighbor has a chain link fence next to mine, I prefer not to use chain link, like you said, chain link stretches, & the posts will have to have concrete around them. T-posts I could put in myself, manually, since I have "sandy soil" (or hire a guy to do it), thinking I could use 8ft t-posts, drive into ground 3-4 ft (should hold)? Its to keep my dogs IN and neighbors dogs OUT, which are big dogs (boxer, shar pei, german sherpard) My dogs are a chihuahua, yorkie & cocker spaniel. The rest of the fence facing public view is 4 ft. wooden picket fence, posts just in ground w/o using concrete, holding up great since 2012. What do you think, would it work for what I want, in sandy soil? I'd leave for now the end wooden posts, replace 'as needed down the road if I had to.

man, I bout had a panic attack watchin you standing up on that next-top step. What can I say, I'm afraid of heights. I wouldn't be up there unless I had somebody back-stopping me (holding the ladder)

How's it holding up, still like the driver? I may have a big job coming up in coming months - around 300 T posts - I want to invest in one of these gas powered drivers. Curious how durable this model is.

may i ask whats the grease for?

I push mine in with the front end loader of my tractor. I can put up to about a 2.5" round pipe into the ground with my 30hp tractor for the bigger pipe I load the bucket with gravel or manure.. I then have a 1000pound hammer..:). Tee posts go in very easily this way. This might help someone.

Will it work to put fencing in my yard cause iv got lots of rocks

Yeah the professional grease makes all the difference over the amateur grease so stick with the professional stuff and it’ll make the t-posts go in so much better. I think I’d take a Sharpie and scribble out the on and off words on the choke. That’s the Chinese for ya, things are a bit backwards on the other side of the world lol.

BEAMNOVA Gas Powered T Post Driver 2 Stroke 32.7cc Manual Piledriver by BEAMNOVA Currently unavailable. just thought you may wanna know youre video very helpful

I can see people with shoulders issues using this ; but for me this seems dumb and slower than just pounding them in with a heavy post driver by hand. Recently re-fenced a property with 7000+ ft of fence using 4'' steel posts and 4 8 Ft T-posts in between. 4,000 ft was high tensile solid lock fixed knot 6'6'' fence. Interesting tool none the less

is your wood post bracing backwards or am I missing something

I'm having trouble cranking mine seems to flood out

All those tools and a nice pole shed and land and no 8’ ladder? Hmm...

What kind of tamper is it

How does it work in rocky soil?

IDK Pete....I don't like ladders. You think the front end loader would have worked....Have to trust the wife driving you around in there!!

Which one did u but we’re looking now, we’ve got 49 acres worth of tposts

Great video! What distance did you use between each t-post?

How many CC is good to drive frost fence post in the ground

Would a bucket on the tractor not push them in?

you've got a big mahindra tractor. why in the world didn't you push them in with the bucket ? Wouldn't the bucket go high enough ?

Got one, not satisfied ,very vague owners manual Pre grease ?????

As of May 10, 2020. The price is $308.99.

what brand it is

They have gone up in price on your website DIY, I found them cheaper on Amazon, 275.

😀👍🇦🇺

The Chinese are laughing about the choke directions.

10 foot fence??? In East-Texas??? This Fence must be for keeping Deer 🦌 🦌 🦌 🦌 OUT…🦌 🦌 🦌 🦌 🦌 🦌 🦌 Am a right or wrong??????

Well, since your video the post driver is now $529.

Your post driver is now $483.