General Timer Tips 

Hello, we're sorry to hear that. Please DM us your contact info via one of the social channels linked in the description and we'll get in touch.

The only way to do that would be to make the second watering on a separate program. If they are the same program, then run times will be the same for every interval.

Hello, unfortunately, this is not possible. The pump will turn on for every zone.

What would you like to know about it?

How to replace the diaphragm, if it is reverse flow, and if you can buy replacement soilonoids for it.

We made a video for you on this: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-K8arMRJ-cm4.html The part number for the diaphragm for those valves is 57045.

Thank you for the video.

Hello. To the left of the screen you'll see the small button labeled RESET. this is a button, not a light. To press it you'll need the end of a ballpoint pen or a pin or paperclip. This will wipe out all programming and take it back to factory fresh settings.

Yes.

To get rid of the delay press the CLEAR button in the top-left.

not working....theres a U with off inside and delay next to it and 57 hours

Press the reset button and see if that clears it. Be warned that will erase all programming and so you will have to reprogram. If that doesn't work, please send us your contract info via private message on our social media channels and we'll get in touch and get this solved.

so...i plugged a hair dryer into the outlet where the systems plugged into...make sure theres power...i have power...i pulled the 2032 battery and there was rust on it...i cleand off the rust and put a new battery and it fired right up....i thought this unit had a low battery light? this unit doesnt...model #57882

thank you for the quick response and the help. much appreciated

The budget setting allows you to adjust the percentage up or down based on season. This is helpful for allowing you to water more or less depending on seasonal conditions, without having to completely reprogram everything. So, for example, let's say you have your zones set to water for differing amounts of time (depending on zone), and as the weather gets cooler, you see you only need to water for half that time. Using the budget feature you could set it to 50% and the timer will now half the water time for each zone.

to the top-left of the dial is a CLEAR button. When on the time you want to delete, press that and it will take it back to zero.

@@orbitsprinklers thank. I watched a video about setting the timer and run times for the sprinklers several times until I was able to understand the operation. I also learned about that little reset button. I pressed and held it down for +/- 15 seconds and that cleared all the data. Following the instructions on the video I was able to set up the sprinklers. I also learned to adjust the sprinklers' spraying distance and spray width. Thank you again.