Orbit Easy Set Logic Timer - Advanced Programming 

What you're seeing is not zones but start times. This timer has up to four start times. But note that each start time is going to run every zone which is scheduled on that program for the allotted amount of time. Here's a more in depth video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-UyG7aZOjt_8.html

@@orbitsprinklers Thanks!

Hello, it is not possible to water all stations at the same time. This is not possible with any sprinkler timer of ours or any other brand that we're aware of. The reason is that zones are usually configured to handle the full pressure of a system, and so having more than one zone active at once would mean significantly reduced pressure & flow to each, likely causing many of the sprinklers not to work.

So does the system water only one station at a time ?

Correct.

It sounds like you've got start times on all three programs. Each start time will run through all the zones on that program for whatever amount of time you have them scheduled. So if you want all the zones to run three times a day, you would need to just have one program set, but with three start times on that program. All other programs would have no run time for any of the zones, else they would run as well.

Orbit Irrigation 99’

Thanks so much. I am getting it but one question, and that is can you put two valves on the same program?? IF so, it's not working for me.

no that's all good, I put valve 1 and 2 on program a, with start time/ and run time. But when I put manual program A, only valve 1 comes on. That's where I'm confused as to why they don't come on together. thanks for quick replies

ok so I put valve 1 and valve 2 on program a, by putting a same start and run time for both of them. But still, only valve one is coming on at the set time. Not the other.