For those of you who have a problem with "endless" or very long discaling, that what helped me: 1. After you start discaling and the first water tank runs empty, DO NOT REFIL IT while it is in the machine or before the machine stops the process - after it runs out of water it can suck some air (for 5-7 seconds) and then it stops. 2. Now you take out water tank, refil it and launch the rinsing (the indicator of discaling should be in the middle at that moment). NB: For some reason, after point 1 while I was refilling the tank, machine decided to go through all levels of coffee size, but apart from that nothing happend. So it looked like as if you were making a large coffee, but no other sounds rather than light indicator moving. After that the machine got the indicator back into the middle and let me start the rinse.
The lesson learnt is use 500ml of water and let it run out and and let the motor groan in protest, it will then enter the waiting mode and finish the process
I tried following the instructions and all it does is the highest bar continually blinks with the descale light. It doesn’t make any noise or do anything. I noticed that the water was barely coming out when I brewed coffee so thought it must need to be descaled. Apparently there is something wrong with this machine. It’s been sitting here blinking on the highest bar for 5 minutes
Perfect result. The first time I did it I just filled the tank and nothing went to plan with the video but when I stuck to the detail of 500ml everything went according to plan. The devil is in the detail!
Thanks the video is poor instruction the written instructions are useless. Your explanation works perfectly. And why do they have irritating background music 😵💫
1, fill the water tank fully 2, start the descaling mode and wait until the tank is totaly empty 3, it will start blinking again so refill the tank fully 4, now it is on level 4 but it will push the water constantly
@@ИванИванов-щ4г3ч I have the same problem. Mine get's stuck on the 4th bar and not moving anymore. Noone says how long does it take, because i red somewhere that one guy had to fill the water 8 times until it was done. Ridiculous.
when it gets to 4 you just have to keep going until it blinks. it will take you about 15 minutes and you will have to refill the water tank various times.
@@denisstoica3298 when it gets to 4 you just have to keep going until it blinks. it will take you about 15 minutes and you will have to refill the water tank various times.
I tried several times, and it didn’t work, it was only when I put exactly 500ml of water in the tank that it worked, I guess instructions are meant to followed to the letter 🤣
when it gets to 4 you just have to keep going until it blinks. it will take you about 15 minutes and you will have to refill the water tank various times.
I tried following the instructions and all it does is the highest bar continually blinks with the descale light. It doesn’t make any noise or do anything. I noticed that the water was barely coming out when I brewed coffee so thought it must need to be descaled. Apparently there is something wrong with this machine. It’s been sitting here blinking on the highest bar for 5 minutes